Considering the nonlocal small-scale effect and surface effect, we perform the size-dependent vibration analysis of carbon nanotube (CNT). The modified governing equations for CNT’s vibration behaviors are derived by using the nonlocal Euler–Bernoulli and Timoshenko beam models, together with the consideration of surface tension and surface elasticity. According to the numerical experiments, both small-scale effect and surface effect make a substantial difference. For flexural vibration, size effect for CNT’s vibration behaviors weakens with the increase of its diameter, but strengthens with the increase of the length–diameter ratio; for shear vibration with constant length–diameter ratio, a nonlinear correlation between size effect and CNT’s diameter exists, suggesting that there is a typical diameter for CNTs, which corresponds to the “strongest” size effect. In addition, the effects of elastic substrate modulus, temperature change, and axial preloading on the vibration behaviors and their size-dependence are analyzed, respectively.

Third-generation semiconductors, such as ZnO and GaN, exhibit strong piezoelectric polarization due to the lack of inversion symmetry. The piezotronic effect observed in these semiconductors was proposed for tuning carrier transport in electronic devices by utilizing the induced piezoelectric potential as a virtual gate. This novel concept allows effective interactions between micro-/nanoelectronic devices and external mechanical stimuli. Piezotronics provide a promising approach for designing future electronic devices beyond Moore’s Law with potential for developing smart sensors, environment monitoring systems, human–machine interaction elements, and other transducers. In this article, we review recent progress in piezotronics using one-dimensional materials, heterojunctions, and large-scale arrays. We provide guidance for future piezotronic devices based on these materials.

When uniform strain is applied to noncentrosymmetric semiconductor crystals, which are piezoelectric, static polarization charges are induced at the surface. If the applied strain is not uniform, these charges can even be created inside the crystal. The applied strain affects electronic transport and also photonic processes, and thus can be used to tune the material properties statically or dynamically. As a result, two new fields have emerged, namely piezotronics and piezo-phototronics. This article reviews the history of the two fields and gives a perspective on their applications. The articles in this issue of MRS Bulletin highlight progress in these two fields, and this article places this progress into perspective.

Strong strain-mediated magnetoelectric (ME) coupling in magnetic/ferroelectric heterostructures has great potential for different high-frequency multiferroic devices. In this article, we present the most recent progress in integrated multiferroic devices. Integrated magnetic tunable inductors with a wide operation frequency range, integrated nonreciprocal bandpass filters with dual magnetic and electric-field tunability based on magnetostatics surface waves, and novel radio-frequency nanomechanical ME resonators with pico-Tesla sensitivity for direct current magnetic fields are presented. Finally, a new antenna miniaturization mechanism, acoustically actuated nanomechanical ME antennas, which can successfully miniaturize the size by 1–2 orders, is introduced. With the advantages of high magnetic field sensitivity, highest antenna gain among all nanoscale antennas at similar frequency, integrated capability with complementary metal oxide semiconductor technology, and ground-plane immunity from metallic surfaces and the human body, ME antennas have a bright future for biomedical applications, wearable antennas, and the Internet of Things due to their unique and particular properties.

This article focuses on the finite element modeling of toroidal microinductors, employing first-of-its-kind nanocomposite magnetic core material and superparamagnetic iron nanoparticles covalently cross-linked in an epoxy network. Energy loss mechanisms in existing inductor core materials are covered as well as discussions on how this novel core material eliminates them providing a path toward realizing these low form factor devices. Designs for both a 2 μH output and a 500 nH input microinductor are created via the model for a high-performance buck converter. Both modeled inductors have 50 wire turns, less than 1 cm3 form factors, less than 1 Ω AC resistance, and quality factors, Q’s, of 27 at 1 MHz. In addition, the output microinductor is calculated to have an average output power of 7 W and a power density of 3.9 kW/in3 by modeling with the 1st generation iron nanocomposite core material.

Thin-film piezoelectric lead zirconate titanate (PZT) is one of the most efficient electromechanical coupling transducer materials currently available for microelectromechanical systems (MEMS). This article reviews piezoelectric MEMS (piezo MEMS) technologies using PZT thin films in radio frequency (RF) devices for communications and radar applications and in the emerging field of millimeter-scale robotics. The electromechanical material properties of thin-film PZT uniquely enable insect-inspired and insect-scale autonomous robots. Recent progress on large force and displacement actuators for robotic leg joints, compact and high torque ultrasonic motors, and bioinspired millimeter-scale flapping wing platforms will be presented. The use of thin-film PZT to achieve high performance and low-voltage RF MEMS switches, ultralow power consumption nanomechanical logic circuits, and high coupling and low loss resonators, filters, and transformers are also reviewed.

Self-folding of thin films is a more deterministic form of self-assembly wherein structures curve or fold up either spontaneously on release from the substrate or in response to specific stimuli. From an intellectual standpoint, the study of the self-folding of thin films at small size scales is motivated by the observation that a large number of naturally occurring materials such as leaves and tissues show curved, wrinkled, or folded micro- and nanoscale geometries. From a technological standpoint, such a self-assembly methodology is important since it can be used to transform the precision of existing planar patterning methods, such as electron-beam lithography, to the third dimension. Also, the self-folding of graphene promises a means to create a variety of three-dimensional carbon-based micro- and nanostructures. Finally, stimuli responsive self-folding can be used to realize chemomechanical and tether-free actuation at small size scales. Here, we review theoretical and experimental aspects of the self-folding of metallic, semiconducting, and polymeric films.

Developments originally targeted toward economical manufacturing of telecommunications products have planted the seeds for new opportunities such as low-cost, large-area electronics based on printing technologies. Organic-based materials systems for printed wiring board (PWB) construction have opened up unique opportunities for materials research in the fabrication of modular electronic systems.

The realization of successful consumer products has been driven by materials developments that expand PWB functionality through embedded passive components, novel MEMS structures (e.g., meso-MEMS, in which the PWB-based structures are at the milliscale instead of the microscale), and microfluidics within the PWB. Furthermore, materials research is opening up a new world of printed electronics technology, where active devices are being realized through the convergence of printing technologies and microelectronics.