Multiple herbicide–resistant (MHR) Palmer amaranth is among the most problematic summer annual broadleaf weeds in Nebraska and several other states. A new MHR corn cultivar (resistant to 2,4-D/glufosinate/glyphosate, also known as Enlist corn) has been commercially available in the United States since 2018. Growers are searching for herbicide programs for control and reduce seed production of MHR Palmer amaranth among Enlist corn crops. The objectives of this study were to evaluate herbicides applied preemergence, early postemergence, or preemergence followed by (fb) late postemergence for the management of MHR Palmer amaranth in Enlist corn fields and to assess their effect on Palmer amaranth biomass, density, seed production, and corn yield. Field experiments were conducted near Carleton, NE, in 2020 and 2021, in a grower’s field of Enlist corn infested with acetolactate synthase–inhibitor/atrazine/glyphosate–resistant Palmer amaranth. Herbicides applied preemergence, such as flufenacet/isoxaflutole/thiencarbazone-methyl, acetochlor/clopyralid/flumetsulam, or acetochlor/clopyralid/mesotrione, provided 75% to 99% control of Palmer amaranth 30 d after preemergence. Preemergence fb late postemergence herbicides resulted in 94% Palmer amaranth control 90 d after late postemergence, reduced weed density to 0 to 8 plants m−2 30 d after late postemergence, and reduced biomass to 2 to 14 g m−2 15 d after late postemergence compared to preemergence-only (59% control, 0 to 15 plants m−2, and 4 to 123 g m−2) and early postemergence–only herbicides (78% control, 6 to 30 plants m−2, and 8 to 25 g m−2). Based on contrast analysis, Palmer amaranth seed production was reduced to 14,050 seeds m–2 in preemergence fb late postemergence herbicide programs compared with 325,490 seed m–2 in preemergence-only and 376,750 seed m–2 in early postemergence–only programs. Based on orthogonal contrast, higher corn yield of 12,340 and 11,730 kg ha−1 was obtained with preemergence fb late postemergence herbicide programs compared with preemergence-only (10,840 and 11,510 kg ha−1) and early postemergence–only programs (10,850 and 10,030 kg ha−1) in 2020 and 2021, respectively.

Waterhemp has evolved resistance to Group 2, 5, 9, 14, and 27 herbicides in Ontario, Canada, making control of this challenging weed even more difficult. Acetochlor is a Group 15, chloroacetanilide herbicide that has activity on many small-seeded annual grasses and some small-seeded annual broadleaf weeds, including waterhemp. The objective of this study was to ascertain if acetochlor mixtures with broadleaf herbicides (dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin), applied preemergence (PRE), increase multiple-herbicide-resistant (MHR) waterhemp control in soybean. Five trials were conducted over 2 yr (2021 and 2022). The acetochlor mixtures caused ≤7% soybean injury, except acetochlor + flumioxazin, which caused 19% soybean injury. Acetochlor applied PRE controlled MHR waterhemp 89% at 4 wk after application (WAA). Dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin controlled MHR waterhemp 59%, 67%, 58%, 64%, and 86%, respectively, at 4 WAA. Acetochlor applied in a mixture with dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin provided good to excellent control of MHR waterhemp; control ranged from 91% to 98% but was similar to acetochlor applied alone. Acetochlor alone reduced MHR waterhemp density and biomass 98% and 93%; acetochlor + flumioxazin reduced waterhemp density and biomass by an additional 2% and 7%, respectively. This research concludes that acetochlor applied in a mixture with flumioxazin was the most efficacious mixture evaluated for MHR waterhemp control.

Waterhemp is a summer annual, broadleaf weed with high fecundity, short seed longevity in the soil, and wide genetic diversity. Populations have evolved resistance to five herbicide modes of action (Groups 2, 5, 9, 14, and 27), which are present across southern Ontario; this has increased the challenge of controlling this competitive weed species in corn, the most important grain crop produced worldwide and the highest-value agronomic crop in Ontario. Acetochlor is a Group 15 soil-applied residual herbicide that has activity on many grass and broadleaf weeds but has yet to be registered in Canada. The objective of this study was to ascertain whether mixtures of acetochlor with flumetsulam, dicamba, atrazine, isoxaflutole/diflufenican, or mesotrione + atrazine applied preemergence would increase the control of multiple-herbicide-resistant (MHR) waterhemp in corn. Five field trials were conducted between 2022 and 2023. No corn injury was observed. Acetochlor applied alone controlled MHR waterhemp 97% 12 wk after application (WAA). All herbicide mixtures controlled MHR waterhemp similarly at ≥98% 12 WAA; there were no differences among herbicide mixtures. Flumetsulam, dicamba, and atrazine provided lower MHR waterhemp control than all other herbicide treatments and did not reduce density or biomass. Acetochlor reduced waterhemp density 98%, while the acetochlor mixtures reduced density similarly at 99% to 100%. This study concludes that the acetochlor mixtures evaluated provide excellent waterhemp control; however, control was not greater than acetochlor alone. Herbicide mixtures should be used as a best management practice to mitigate the evolution of herbicide resistance.

The herbicides that inhibit very-long-chain fatty acid (VLCFA) elongases are primarily used for residual weed control in corn, barley, oat, sorghum, soybean, sugarcane, certain vegetable crops, and wheat production fields in the United States. They act primarily by inhibiting shoot development of susceptible species, preventing weed emergence and growth. The objectives of this review were to summarize 1) the chemical family of VLCFA-inhibiting herbicides and their use in the United States, 2) the VLCFA biosynthesis in plants and their site of action, 3) VLCFA-inhibitor resistant weeds and their mechanism of resistance, and 4) the future of VLCFA-inhibiting herbicides. After their reclassification as Group 15 herbicides to include shoot growth-inhibiting herbicides (Group 8), the VLCFA-inhibiting herbicides are currently represented by eight chemical families (benzofurans, thiocarbamates, α-chloroacetamides, α-oxyacetamides, azolyl-carboxamides, isoxazolines, α-thioacetamides, and oxiranes). On average, VLCFA-inhibiting herbicides are applied once a year to both corn and soybean crops in the United States with acetochlor and S-metolachlor being the most used VLCFA-inhibiting herbicides in corn and soybean production, respectively. The site of action of Group 15 herbicides results from inhibition of the VLCFA synthase, which is encoded by several fatty acid elongase (FAE1)-like genes in VLCFA elongase complex in an endoplasmic reticulum. The VLCFA synthase is a condensing enzyme, and relies on a conserved, reactive cysteinyl sulfur in its active site that performs a nucleophilic attack on either the natural substrate (fatty acyl-CoA) or the herbicide. As of August 2023, 13 weed species have been documented to be resistant to VLCFA inhibitors, including 11 monocot weeds and two dicot weeds (Palmer amaranth and waterhemp). The isoxazolines (pyroxasulfone and fenoxasulfone) are the most recently (2014) discovered VLCFA-inhibiting herbicides. Although the intensity of VLCFA-inhibitor-directed discovery efforts has decreased over the past decade, this biochemical pathway remains a viable mechanistic target for the discovery of herbicide premixes and a valuable component of them.

Six field experiments were established in southwestern Ontario in 2021 and 2022 to evaluate whether the addition of a grass herbicide (acetochlor, dimethenamid-p, flufenacet, pendimethalin, pyroxasulfone, or S-metolachlor) to tolpyralate + atrazine improves late-season weed control in corn. Tolpyralate + atrazine caused 12% and 5% corn injury at 1 and 4 wk after herbicide application (WAA); corn injury was not increased with the addition of a grass herbicide. Weed interference reduced corn yield 60%. The addition of a grass herbicide to tolpyralate + atrazine did not enhance velvetleaf control. The addition of acetochlor or dimethenamid-p to tolpyralate + atrazine enhanced pigweed species control 4% 4 WAA; the addition of other grass herbicides tested did not increase pigweed species control. The addition of acetochlor enhanced common ragweed control 5% at 4 WAA, and the addition of acetochlor or dimethenamid-p enhanced common ragweed control 8% at 8 WAA; the addition of other grass herbicides did not improve common ragweed control. The addition of acetochlor to tolpyralate + atrazine enhanced common lambsquarters control up to 4%; there was no enhancement in common lambsquarters control with the addition of the other grass herbicides. Tolpyralate + atrazine controlled barnyardgrass 90% and 78% at 4 and 8 WAA, respectively; the addition of a grass herbicide enhanced barnyardgrass control 9% to 10% and 21% at 4 and 8 WAA, respectively. Tolpyralate + atrazine controlled green or giant foxtail 80% and 69% at 4 and 8 WAA, respectively; the addition of a grass herbicide enhanced foxtail species control 15% to 19% and 24% to 29% at 4 and 8 WAA, respectively. This research shows that adding a grass herbicide to tolpyralate + atrazine mixture can improve weed control efficacy, especially increased annual grass control in corn production.

Drill-interseeding cover crops into standing corn (V3 to V5 growth stage) provides opportunities for increasing functional diversity in cropping systems by facilitating use of cover crop mixtures that include grass, legume, and brassica species. Designing herbicide-based weed control programs that negotiate tradeoffs between crop protection and environmental goals when interseeding mixtures remains a major challenge. The objective of this study was to use greenhouse-based dose-response assays to describe the relative sensitivity of 12 cover crop species that differ in traits, including taxonomic group and seed mass, to chloroacetamide (acetochlor, dimethenamid, S-metolachlor; Group 15 herbicides as categorized by the Weed Science Society of America) and pyrazole (pyroxasulfone; Group 15) herbicides. Nonlinear models were fit, and effective doses were estimated (ED50) to compare relative sensitivities of cover crop species to each herbicide. Brassica species (winter canola, Dwarf Essex rape, daikon radish) were less sensitive than small-seeded legumes (medium red clover, crimson clover) and grasses (annual ryegrass) in response to each chloroacetamide, but similar in response to pyroxasulfone. Austrian winter pea, a large-seeded legume, was less sensitive to each herbicide compared to other legumes (crimson clover, medium red clover, hairy vetch). Cereal rye and triticale were less sensitive to dimethenamid, S-metolachlor, and pyroxasulfone compared to annual ryegrass, but similar sensitivities were observed for acetochlor. These results suggest that relative differences in sensitivity to chloroacetamide and pyrazole herbicides could be exploited when designing cover crop mixtures for interseeding. It is imperative, however, to use these findings in conjunction with field-based observations of cover crop injury potential in interseeded systems.

Rice producers in the United States need effective herbicides to control problematic weeds. Previous research has demonstrated that acetochlor can provide in-season weed control in rice; however, undesirable injury is common. Thus, trials were initiated in 2020 and 2021 to evaluate 1) rice cultivar tolerance to microencapsulated (ME) acetochlor with the use of a fenclorim seed treatment at 2.5 g ai kg−1 of seed; 2) a dose-response of a fenclorim seed treatment with ME acetochlor; and 3) rice tolerance to fenclorim and ME acetochlor under cool, wet conditions. For all trials, acetochlor was applied delayed-preemergence (4 to 7 d after planting). In the dose-response trials and in the presence of acetochlor, the fenclorim seed treatment rate of 2.5 g ai kg−1 reduced rice injury and increased rice plant heights and shoot numbers relative to acetochlor without fenclorim, and plant heights and shoot numbers were comparable to those of the nontreated control in all evaluations. In the cultivar screening, 14 of 16 cultivars exhibited <20% injury with acetochlor at 1,260 g ai ha−1 and fenclorim at 2.5 g ai kg−1 2 wk after emergence (WAE) at the Pine Tree Research Station (PTRS). At the Rice Research and Extension Center (RREC) 2 and 4 WAE and at PTRS 4 WAE, all cultivars exhibited <20% injury with acetochlor and fenclorim. The fenclorim seed treatment in the presence of acetochlor provided comparable rice plant height, shoot numbers, groundcover, and rough rice yield to that of the nontreated control. Under cool, wet conditions, rice injury without fenclorim ranged from 15% to 60% with acetochlor at 1,050 g ai ha−1, whereas injury from acetochlor with the fenclorim seed treatment ranged from 0% to 20%. Based on the results of these experiments, the fenclorim seed treatment appears to safen an assortment of rice cultivars from injury caused by ME acetochlor.

Many problematic weeds have evolved resistance to herbicides in mid-southern U.S. rice fields. With the lack of new effective herbicides, rice producers seek alternatives that are currently not labeled for rice production. Inhibitors of very-long chain fatty acid elongase (VLCFA) are currently not labeled for use with U.S. rice crops but are labeled for use in other U.S. row cropping systems and rice production in Asia. Previous research has demonstrated the utility of VLCFA inhibitors for weed control in rice; however, these herbicides induce variable amounts of injury to the crop when applied early in the growing season. Experiments were initiated in 2020 and 2021 at the Rice Research and Extension Center near Stuttgart, AR, to evaluate rice tolerance and weed control with acetochlor and seed treatment with a herbicide safener, fenclorim. Three rates of a microencapsulated formulation of acetochlor (630, 1,260, and 1,890 g ai ha−1), four application timings (preemergence, PRE; delayed-preemergence, DPRE; spiking; and 1-leaf), and without or with the fenclorim seed treatment (2.5 g kg−1 of seed) were used to evaluate rice tolerance, weedy rice control, and barnyardgrass control. Acetochlor applied DPRE at 1,260 g ai ha−1 provided better weedy rice and barnyardgrass control than applications at the 1-leaf stage at the same rate. Acetochlor rates of 1,260 and 1,890 g ai ha−1 reduced barnyardgrass and weedy rice densities by more greater than the 630 g ai ha−1 rate. The fenclorim seed treatment did not influence weedy rice or barnyardgrass control but did reduce injury for DPRE acetochlor applications. Based on these results, acetochlor can be safely applied to rice DPRE (≤19% injury) at 1,260 g ai ha−1 when the seed is treated with fenclorim, leading to ≥88% barnyardgrass and ≥45% weedy rice control 28 d after treatment.

Common bean and azuki bean are poor competitors with weeds and demonstrate sensitivity to herbicides used for weed control in soybean. S-metolachlor, flufenacet, and acetochlor are categorized as Group 15 herbicides and provide control of multiple annual grass and select small-seeded broadleaf weeds. By way of field trials near Exeter and Ridgetown, Ontario, in 2019, 2020, and 2021, four dry bean market classes (azuki, kidney, small red, and white bean) were evaluated for their tolerance to 1× established label rates and 2× rates of S-metolachlor (1,600 and 3,200 g ai ha−1), flufenacet (750 and 1,500 g ai ha−1) and acetochlor (1,700 and 3,400 g ai ha−1) applied preplant incorporated (PPI). Injury was evaluated by assessing visible injury symptoms, density, shoot biomass, height, seed moisture content, and seed yield. Azuki bean was more sensitive to the Group 15 herbicides than other dry bean market classes; the Group 15 herbicides caused a 12% reduction in azuki bean growth at 2 wk after emergence; growth reduction was ≤2% in the other bean classes. Flufenacet (2× rate) was the most injurious treatment, causing a 27% reduction in azuki bean yield. This study concludes that kidney, small red, and white bean have a sufficient margin of crop safety to flufenacet, acetochlor, and S-metolachlor applied PPI. Azuki bean was sensitive to flufenacet; additional research is needed to investigate azuki bean tolerance to acetochlor and S-metolachlor applied PPI.

Crop residue can intercept and adsorb residual herbicides, leading to reduced efficacy. However, adsorption can sometimes be reversed by rainfall or irrigation. Greenhouse experiments were conducted to evaluate the effect of differential overhead irrigation level on barnyardgrass response to acetochlor, pyroxasulfone, and pendimethalin applied to bare soil or wheat straw–covered soil. Acetochlor applied to wheat straw–covered soil resulted in 25% to 40% reduced control, 30 to 50 more plants 213 cm−2, and greater biomass than bare soil applications, regardless of irrigation amount. Barnyardgrass suppression by pyroxasulfone applications to wheat straw–covered soil improved with increased irrigation; however, weed control levels similar to bare soil applications were not observed after any irrigation amount. Barnyardgrass densities from pyroxasulfone applications to bare soil decreased with irrigation but did not change in applications to wheat straw–covered soil. Aboveground barnyardgrass biomass from pyroxasulfone decreased with greater irrigation amounts in both bare soil and wheat straw–covered soil applications; however, decreased efficacy in wheat straw–covered soil applications was not alleviated with irrigation. Pendimethalin was the only herbicide tested that displayed reduced efficacy when irrigation amounts increased in applications to both bare soil and wheat straw–covered soil. Barnyardgrass control from pendimethalin applied to wheat straw–covered soil was similar to bare soil applications when approximately 0.3 to 1.2 cm of irrigation was applied; however, irrigation amounts greater than 1.2 cm resulted in greater barnyardgrass control in bare soil applications. No differences between wheat straw–covered soil and bare soil applications of pendimethalin were observed for barnyardgrass densities. These data indicate that increased irrigation or rainfall level can increase efficacy of acetochlor and pyroxasulfone. Optimal rainfall or irrigation amounts required for efficacy similar to bare soil applications are herbicide specific, and some herbicides, such as pendimethalin, may be adversely affected by increased rainfall or irrigation.

Studies were conducted in 2019 and 2020 in Lewiston, NC, to determine the crop response of 4-hydroxyphenylpyrivate dioxygenase (HPPD)-resistant cotton to isoxaflutole (IFT) and other cotton herbicides as part of a cotton weed management program that included herbicides applied preemergence, early postemergence (EPOST), and mid-postemergence (MPOST). IFT was applied PRE at 105 g ha−1 alone and in various combinations with acetochlor, diuron, fluometuron, fluridone, fomesafen, pendimethalin, and pyrithiobac. EPOST treatments included IFT at 53 or 105 g ha−1 alone or in combination with glyphosate or glufosinate, or dimethenamid-P + glufosinate. Glyphosate + glufosinate was applied MPOST to all treatments except the nontreated control. Cotton injury from IFT applied PRE was minimal (0% to 3%). Injury following EPOST application of dimethenamid-P + glufosinate ranged from 3% to 5% and 6% to 9% in 2019 and 2020, respectively. In both years, injury from IFT applied PRE followed by IFT applied EPOST never exceeded injury from IFT applied PRE followed by dimethenamid-P + glufosinate. Isoxaflutole applied PRE followed by IFT applied EPOST at 105 g ha−1 resulted in 0% to 2% cotton injury, indicating that IFT can be applied either PRE or EPOST with minimal risk to cotton. Late-season cotton height and cotton lint yield were not affected by any herbicide treatment. The experimental HPPD-resistant cotton cultivar was minimally injured by IFT applied PRE and EPOST, it tolerated standard cotton herbicides, and yield loss was not observed. Given these results, HPPD-resistant cotton and IFT may be integrated into cotton weed management systems with minimal risk for cotton injury and provide an additional effective mechanism of action for managing troublesome weeds in cotton.

Herbicides that inhibit very-long-chain fatty acids (VLCFAs) have been widely used for preemergence control of annual monocot and small-seeded dicot weed species, such as waterhemp, since their discovery in the 1950s. VLCFA-inhibiting herbicides are often applied in combination with active ingredients that possess residual activity on small-seeded broadleaf weeds, which can make their contribution to preemergence waterhemp control difficult to quantify. Bare-ground field experiments were designed to investigate the efficacy of eight VLCFA-inhibiting herbicides applied at their minimum and maximum labeled rates for control of Illinois waterhemp populations. Four different locations were selected, two of which contained previously characterized VLCFA inhibitor–resistant waterhemp populations in Champaign County (CHR) and McLean County (MCR). Two locations with VLCFA inhibitor–sensitive waterhemp populations included the University of Illinois South Farm in Urbana, IL, and the Orr Research Center in Perry, IL. Soils at the CHR, MCR, and Urbana locations contained greater than 3% organic matter, but less than 3% organic matter at Perry. Non-encapsulated acetochlor and alachlor controlled CHR and MCR waterhemp populations 28 d after treatment (DAT), whereas other VLCFA-inhibiting herbicides resulted in 61% and 76% control of the CHR and MCR populations, respectively. In contrast, all VLCFA-inhibiting herbicides resulted in 81% and 88% control of the Perry and Urbana waterhemp populations, respectively, 28 DAT. Waterhemp control decreased by 42 DAT, especially for the VLCFA inhibitor–resistant CHR and MCR populations. Overall, VLCFA-inhibiting herbicides remain effective for controlling sensitive waterhemp, but most are not effective for controlling VLCFA inhibitor–resistant waterhemp populations. Proper herbicide stewardship and integrated weed management practices should be implemented to maintain VLCFA-inhibiting herbicide efficacy for waterhemp management in the future.

A chloroacetamide herbicide by application timing factorial experiment was conducted in 2017 and 2018 in Mississippi to investigate chloroacetamide use in a dicamba-based Palmer amaranth management program in cotton production. Herbicides used were S-metolachlor or acetochlor, and application timings were preemergence, preemergence followed by (fb) early postemergence, preemergence fb late postemergence, early postemergence alone, late postemergence alone, and early postemergence fb late postemergence. Dicamba was included in all preemergence applications, and dicamba plus glyphosate was included with all postemergence applications. Differences in cotton and weed response due to chloroacetamide type were minimal, and cotton injury at 14 d after late postemergence application was less than 10% for all application timings. Late-season weed control was reduced up to 30% and 53% if chloroacetamide application occurred preemergence or late postemergence only, respectively. Late-season weed densities were minimized if multiple applications were used instead of a single application. Cotton height was reduced by up to 23% if a single application was made late postemergence relative to other application timings. Chloroacetamide application at any timing except preemergence alone minimized late-season weed biomass. Yield was maximized by any treatment involving multiple applications or early postemergence alone, whereas applications preemergence or late postemergence alone resulted in up to 56% and 27% yield losses, respectively. While no yield loss was reported by delaying the first of sequential applications until early postemergence, forgoing a preemergence application is not advisable given the multiple factors that may delay timely postemergence applications such as inclement weather.

Glyphosate-resistant (GR) Palmer amaranth is one of the most difficult to control weeds in soybean production fields in Nebraska and the United States. An integrated approach is required for effective management of GR Palmer amaranth. Cultural practices such as narrow row spacing might augment herbicide efficacy for management of GR Palmer amaranth. The objectives of this study were to evaluate the effect of row spacing and herbicide programs for management of GR Palmer amaranth in dicamba/glyphosate-resistant (DGR) soybean. Field experiments were conducted in a grower’s field with a uniform population of GR Palmer amaranth near Carleton, Nebraska, in 2018 and 2019. Year-by-herbicide program-by-row spacing interactions were significant for all variables; therefore, data were analyzed by year. Herbicides applied PRE controlled GR Palmer amaranth ≥95% in both years 14 d after PRE (DAPRE). Across soybean row-spacing, most PRE followed by (fb) early-POST (EPOST) herbicide programs provided 84% to 97% control of Palmer amaranth compared with most EPOST fb late-post (LPOST) programs, excluding dicamba in single and sequential applications (82% to 95% control). Mixing microencapsulated acetochlor with a POST herbicide in PRE fb EPOST herbicide programs controlled Palmer amaranth ≥93% 14 d after EPOST and ≥96% 21 d after LPOST with no effect on Palmer amaranth density. Interaction of herbicide program-by-row spacing on Palmer amaranth control was not significant; however, biomass reduction was significant at soybean harvest in 2019. The herbicide programs evaluated in this study caused no soybean injury. Due to drought conditions during a majority of the 2018 growing season, soybean yield in 2018 was reduced compared with 2019.

Amid widespread occurrence of herbicide-resistant weeds in the United States, the use of PRE herbicides and cover crops have resurged once again as important strategies for weed management in cropping systems. The objective of this experiment was to evaluate the length of soil residual weed control from PRE soybean herbicides and the detrimental impact of these herbicides on cover crop species using field treated soil in greenhouse bioassays. Greenhouse bioassays were conducted using soil from field experiments conducted in 2018 and 2019 in Arlington and Lancaster, WI. PRE herbicides consisted of imazethapyr, chlorimuron-ethyl, and cloransulam-methyl (acetolactate synthase [ALS] inhibitors); metribuzin (photosystem II [PS II] inhibitor); sulfentrazone, flumioxazin, and saflufenacil (protoporphyrinogen oxidase [PPO] inhibitors); acetochlor, S-metolachlor, dimethenamid-P, and pyroxasulfone (very long-chain fatty acid [VLCFA] inhibitors); and a nontreated control. Greenhouse bioassays were conducted using soil (depth, 0 to 10 cm) sampled at 0, 10, 20, 30, 40, and 50 d after treatment (DAT). Palmer amaranth and giant foxtail (weeds), and radish and cereal rye (cover crops) were used as bioindicators of herbicide levels in the soil. Bioassay results showed extended soil residual control of Palmer amaranth with sulfentrazone and pyroxasulfone; extended residual control of giant foxtail was observed with pyroxasulfone and S-metolachlor. Chlorimuron-ethyl and metribuzin were the most injurious herbicides to radish and cereal rye shortly after application, respectively, but minimal injury was observed from soil samples collected 50 DAT, indicating the use of PRE and fall-seeded cover crops in southern Wisconsin can be compatible. These results can support growers and practitioners with selection of effective PRE herbicides for Palmer amaranth and giant foxtail control and reduced impact on fall-seeded radish and cereal rye cover crops, altogether leading to more effective, diverse, and sustainable weed management programs.

Resistance to penoxsulam among barnyardgrass populations is prevalent in rice fields in China. Seeds of penoxsulam-resistant (AXXZ-2) and penoxsulam-susceptible (JLGY-3) barnyardgrass populations, as well as the seeds of two rice varieties, including Wuyungeng32 (WY) and Liangyou669 (LY), were planted in plastic pots and then treated with a rate titration of acetochlor, anilofos, butachlor, clomazone, oxadiazon, pendimethalin, pretilachlor, pyraclonil, or thiobencarb. The two barnyardgrass populations exhibited similar susceptibility to acetochlor, anilofos, butachlor, oxadiazon, pretilachlor, or pyraclonil. However, the susceptibility differed between the barnyardgrass populations in response to clomazone, pendimethalin, and thiobencarb. For AXXZ-2, herbicide rates that caused 50% reduction in shoot biomass from the nontreated control (GR50) were 179, >800, and 1,798 g ha−1 for clomazone, pendimethalin, and thiobencarb, respectively; whereas JLGY-3 GR50 values were 61, 166, and 552 g ha−1, respectively. Both rice varieties demonstrated excellent tolerance to acetochlor, butachlor, oxadiazon, pretilachlor, and thiobencarb. However, substantial rice damage was observed when anilofos and clomazone were used. Anilofos at 352 g ha−1 and clomazone at 448 g ha−1 reduced rice shoot biomass by 41% and 50% from the nontreated, respectively. Averaged across herbicide rates, clomazone use resulted in a reduction in rice shoot biomass from that of the nontreated control by 52% and 34% for WY and LY, respectively; and pendimethalin use resulted in a reduction in rice shoot biomass from the nontreated control by 25% and 9% for WY and LY, respectively.

Establishment of alfalfa by interseeding it with corn planted for silage can enhance crop productivity but weed management is a challenge to adoption of the practice. Although a simple and effective approach to weed management would be to apply a glyphosate-based herbicide, concerns about herbicide resistance and limitations in available alfalfa varieties exist. Field experiments were conducted to compare the efficacy and selectivity of PRE, POST, and PRE followed by POST herbicide programs to a glyphosate-only strategy when interseeding alfalfa with corn. Experiment 1 compared PRE applications of acetochlor, mesotrione, S-metalochlor, metribuzin, and flumetsulam. Results indicate that acetochlor and metribuzin, and S-metalochlor used at a rate of 1.1 kg ai ha−1 were the most effective and selective PRE herbicides 4 wk after treatment (WAT), but each resulted in greater overall weed cover than glyphosate by 8 WAT. Experiment 2 evaluated applications of bentazon, bromoxynil, 2,4-DB, and mesotrione at early and late POST times. Several herbicides used POST exhibited similar effectiveness and selectivity as glyphosate, including early applications of bromoxynil (0.14 kg ai ha−1) and 2,4-DB (0.84 or 1.68 kg ai ha−1), as well as late applications of bromoxynil (0.42 kg ai ha−1), 2,4-DB (0.84 kg ai ha−1), and mesotrione (0.05 or 0.11 kg ai ha−1). A third experiment compared applications of acetochlor PRE, bromoxynil POST, and a combination of acetochlor PRE with bromoxynil POST. All treatments were effective and safe for use in this interseeded system, although interseeded alfalfa provided 65% to 70% weed suppression in corn planted for silage without any herbicide. Herbicide treatments had no observable impacts on corn and alfalfa yields, so weed management was likely of limited economic importance. However, weed competitiveness can vary based on several different factors including weed species, density, and site-specific factors, and so further investigations under different environments and conditions are needed.

Field studies were conducted in 2018 and 2019 in Arkansas, Indiana, Illinois, Missouri, and Tennessee to determine if cover-crop residue interfered with herbicides that provide residual control of Palmer amaranth and waterhemp in no-till soybean. The experiments were established in the fall with planting of cover crops (cereal rye + hairy vetch). Herbicide treatments consisted of a nontreated or no residual, acetochlor, dimethenamid-P, flumioxazin, pyroxasulfone + flumioxazin, pendimethalin, metribuzin, pyroxasulfone, and S-metolachlor. Palmer amaranth took 18 d and waterhemp took 24 d in the cover crop–alone (nontreated) treatment to reach a height of 10 cm. Compared with this treatment, all herbicides except metribuzin increased the number of days until 10-cm Palmer amaranth was present. Flumioxazin applied alone or in a mixture with pyroxasulfone were the best at delaying Palmer amaranth growing to a height of 10 cm (35 d and 33 d, respectively). The herbicides that resulted in the lowest Palmer amaranth density (1.5 to 4 times less) integrated with a cover crop were pyroxasulfone + flumioxazin, flumioxazin, pyroxasulfone, and acetochlor. Those four herbicide treatments also delayed Palmer amaranth emergence for the longest period (27 to 34 d). Waterhemp density was 7 to 14 times less with acetochlor than all the other herbicides present. Yield differences were observed for locations with waterhemp. This research supports previous research indicating that utilizing soil-residual herbicides along with cover crops improves control of Palmer amaranth and/or waterhemp.

Giant reed recently was promoted as a biofuel crop in Oregon. Because giant reed is a highly invasive plant in North American rivers, the planting of this species in Oregon is a cause for concern to scientists and local land managers. However, some growers in the area were interested in producing giant reed as a rotational crop. To find potential herbicides to control the giant reed or to control it as a volunteer, 13 foliar and 13 cut-and-spray herbicide treatments were preevaluated in greenhouse studies. We chose 10% and 85% reduction in aboveground biomass for either crop safety or control, respectively. When applied at the standard rates, acetochlor and dimethenamid-p reduced aboveground dry biomass of the crop by 10% or less. Acetochlor+atrazine, atrazine, flufenacet, and mesotrione reduced aboveground biomass of the crop by at least 85%, indicating that these compounds have the potential to serve as controls against giant reed.

Weed competition severely constrains cassava root yield in sub-Saharan Africa; thus, good weed control measures, including the use of herbicides, are increasingly important. Herbicide trials were conducted at five locations across eastern, western, and north-central Nigeria over two cropping seasons (2014 and 2015). Nineteen premixed PRE herbicides applied at different rates were evaluated for efficacy on weeds and selectivity on cassava. Manual hoe-weeding at 4, 8, and 12 wk after planting (WAP) and two S-metolachlor + atrazine treatments commonly used by cassava growers were included for comparison. Six of the 19 PRE herbicide treatments (indaziflam + isoxaflutole, indaziflam + metribuzin, flumioxazin + pyroxasulfone, isoxaflutole, acetochlor + atrazine + terbuthylazine, and terbuthylazine + S-metolachlor) consistently provided 80% to 98% broadleaf and grass weed control up to 8 wk after treatment. Overall, PRE herbicide treatments and cassava yield were significantly positively correlated. Herbicide treatments terbuthylazine + S-metolachlor, flumioxazin + pyroxasulfone, diflufenican + flufenacet + flurtamone (respectively, 60 + 60 + 60, 120 + 120 + 120, 90 + 360 + 120, and 135 + 360 + 180 g ha−1), acetochlor + atrazine + terbuthylazine (875 + 875 + 875 g ha−1), S-metolachlor + atrazine (870 + 1,110 g ha−1), oxyfluorfen (240 g ha−1), indaziflam + isoxaflutole (75 + 225 g ha−1), indaziflam + metribuzin (75 + 960 g ha−1), and aclonifen + isoxaflutole (500 + 75 g ha−1) contributed to yields exceeding twice the Nigerian national average of 8.76 tonnes ha−1. These treatments had root yields of 1.4 to 2 times higher than plots that had been hoe-weeded three times. There were some adverse herbicide treatment effects such as delayed cassava sprouting and temporary leaf bleaching observed in indaziflam and diflufenican + flufenacet + flurtamone treatments, whereas sulfentrazone caused prolonged leaf crinkling. The PRE applications alone at rates safe for cassava did not provide adequate season-long weed control; supplemental POST weed control is needed about 10 WAP for satisfactory season-long control.