Cover crop adoption is increasing among growers with the occurrence of herbicide-resistant weed species. A field study conducted at three sites from autumn 2021 through the crop harvest in 2022 in Alabama aimed to evaluate the combined effect of cover crop residue and herbicides for weed control and improved cotton lint yield. The experiment was conducted in split-plot design with main plots consisting of six cover crop treatments: cereal rye, crimson clover, oat, radish, cover crop mixture, and winter fallow. The subplots included four herbicide treatments: (i) preemergence, pendimethalin + fomesafen, (ii) postemergence, dicamba + glyphosate + S-metolachlor, (iii) preemergence followed by postemergence, and (iv) nontreated (NT) check. Cover crops, excluding radish, exhibited greater weed biomass reduction than winter fallow with corresponding herbicide treatments of either preemergence, postemergence, or preemergence + postemergence as compared to control (winter fallow and NT check). Considering preemergence + postemergence treatment, cereal rye, crimson clover, oat, and cover crop mixture provided >95% weed biomass reduction as compared to control. Looking at the overall effect of cover crop, cereal rye outperformed and showed greater weed biomass reduction than radish relative to control. Preemergence + postemergence herbicide treatment resulted in greater lint yield than other treatments. Cotton in cereal rye plots had a greater lint yield than in winter fallow at one out of three locations. In conclusion, integrating herbicides and incorporating high-residue cover crops such as cereal rye is an effective weed management strategy to control troublesome weeds.

In mid-southern, southeastern, and northeastern U.S. soybean production regions, the evolution of herbicide-resistant weeds has become a significant management challenge for growers. The rising herbicide costs for managing herbicide-resistant weeds are also a growing concern, leading to the utilization of cover crops as an integrated weed management strategy for addressing these challenges. Field experiments were conducted at two locations in Alabama in 2022 to evaluate winter cereal cover crops, including a mixture and herbicide system integration in soybean. Treatments included five cover crops: oats, cereal rye, crimson clover, radish, and a cover crop mixture. Cover crops were evaluated for their weed-suppressive characteristics compared to a winter fallow treatment. Additionally, four herbicide treatments were applied: a preemergence (PRE) herbicide, a postemergence (POST) herbicide, PRE plus POST herbicides, and a nontreated (NT) check. The PRE herbicide was S-metolachlor; the POST treatment contained a mixture of dicamba and glyphosate. The PRE plus POST system contained the PRE application followed by POST application. Results show that cereal rye and the cover crop mixture provided weed biomass reduction compared to all cover crop treatments across both locations. Furthermore, we observed greater soybean yield following the cereal rye cover crop than following the winter fallow treatment at one location. POST and PRE plus POST herbicide treatment resulted in greater weed biomass reduction and improved soybean yield than the PRE herbicide treatment alone and the NT check at both locations.

More growers across the U.S. Midwest are considering interseeding or overseeding cover crops into corn for soil health purposes. One challenge of this practice is the potential injury from soil residual herbicides applied preemergence (PRE) for weed control in corn to the interseeded and overseeded cover crop species. Field-treated soil was collected in 2021 and 2022 at Janesville, WI, and Lancaster, WI, to investigate the impact of PRE residual herbicides on establishment of interseeded and overseeded cover crops via greenhouse bioassay. Soil samples (0 to 5 cm depth) were collected from field experiments at 0, 10, 20, 30, 40, 50, 60, and 70 days after treatment (DAT). Treatments consisted of 14 single and multiple sites of action (SOAs) PRE herbicides plus a nontreated check (NTC). Four bioindicator cover crop species were used in the greenhouse bioassay: annual ryegrass, cereal rye, radish, and red clover. Cover crop biomass was collected 28 d after bioassay seeding. Cover crop species responded differently across herbicide treatments. Annual ryegrass and cereal rye were sensitive to treatments containing herbicide Group 15, whereas Groups 2, 4, 5, 14, and 27 had minimal impact on their establishment when field soil was collected at 30 DAT (interseeding scenario) and 70 DAT (overseeding scenario) compared to the NTC. Radish and red clover were sensitive to herbicide Groups 2, 4, and 27, whereas Groups 5, 14, and 15 had minimal impact on their establishment. Annual ryegrass, radish, and red clover were more sensitive to PRE herbicides containing two and three SOAs than to herbicides with a single SOA. On the basis of these greenhouse bioassay results, cover crop species should be carefully selected depending on the soil residual herbicide when interseeded and overseeded into corn. Field studies will be conducted to validate these results and support recommendations to growers interested in this system.

Small-acreage brassica vegetables need additional herbicide options. Among the vegetables grown in California are a number of niche crops, such as bok choi and brussels sprouts, that have a limited number of registered herbicides, such as DCPA. Sulfentrazone and S-metolachlor have food use tolerances for use on brassica head and stem Group 5-16, which includes crops like bok choi and brussels sprouts, as well as brassica leafy greens Subgroup 4-16B, which includes crops like kale. However, there is a lack of data for S-metolachlor and sulfentrazone on a wide variety of seeded and transplanted brassica vegetables. S-metolachlor applied preemergence (PRE) was evaluated on six direct-seeded brassica vegetables during 2019 and 2020, including bok choi, broccoli rabe, collard, mizuna, radish, and mustard greens. S-metolachlor and sulfentrazone were both evaluated PRE in transplanted brussels sprouts and kale. The results indicate that most of the seeded brassica vegetables were tolerant of S-metolachlor and that transplanted brassica vegetables were tolerant of both S-metolachlor and sulfentrazone. Broccoli rabe was moderately injured in 2020, but yields did not vary among treatments either year.

The relative sensitivity of various crops and weeds to celery root residue incorporated into soil was determined in greenhouse experiments. A range of concentrations was used to determine the percentage of celery residue needed to cause a 50% reduction in plant growth (I50). The most sensitive weed was spiny amaranth and the least sensitive was common purslane. The most sensitive crop was radish and the least sensitive was celery. Selectivity was calculated as crop I50/weed I50 and varied from a maximum of 13 for celery and spiny amaranth to a low of 0.4 for radish and common purslane. Selective weed suppression might be obtained when celery residue is present.

The study was undertaken to compare the level of total phenolics and the allelopathic potential of Pluchea lanceolata in soils cultivated once or twice a year. Thirty-five cultivated fields were sampled from seven sites in three different seasons. The leaf area, leaf weight, height, and density of P. lanceolata plants were measured. Leaves of P. lanceolata were analyzed for nine chemical characteristics: leaf ash, total phenolics, phosphate, Cu, Zn, Na, K, Mg, and Ca. Weed-infested topsoil and subsoil were analyzed for pH, electrical conductivity, organic carbon, chloride, bicarbonate, total carbonate, phosphate, total phenolics, Zn, Na, K, Mg, and Ca. Fields cultivated twice a year were designated as Group I, while those cultivated once a year were designated as Group II. Biotic and chemical characteristics of plants of Group I and II were not different. Topsoil and subsoil of Group II had higher values for Ca, while topsoil of Group I had higher values for total phenolics. The higher phenolic content of Group I topsoil was probably due to greater incorporation of weed plant parts into the soils as compared to Group II fields. Seedling growth of crop plants such as radish, carrot, maize, mustard, tomato, turnip, and wheat was affected more by soil from P. lanceolata-infested fields that were cultivated twice a year than those cultivated only once. A correlation between higher total phenolic content of P. lanceolata-infested topsoil with two cultivations, and growth response of crop plants was recorded.

Greenhouse and field experiments were conducted to determine the effects of nitrogen (N) supply and purple nutsedge population densities on the yield of radish. In the greenhouse studies, additive series with purple nutsedge densities of 0, 50, 100, 200 or 350 plants m−2 were established. Nitrogen rates of 0, 110, 220, or 330 kg ha−1 were provided to the potting medium. A significant density by N interaction was found for radish fresh weight. Within a given nutsedge density, radish yield decreased as N rate increased. In field studies, additive series of 0, 50, 100, 150, or 200 nutsedge plants m−2 were established the same day radish was sown. Nitrogen rates were 100 or 200 kg ha−1. Marketable radish yield losses and nutsedge shoot dry weight and height were determined 30 d after seeding the crop. Nutsedge densities and N rates interactively influenced radish root yield. Radish yield loss reached 100% at nutsedge densities of 75 and 125 plants m−2 at 200 and 100 kg N ha−1, respectively. Purple nutsedge produced larger shoot biomass as N increased from 100 to 200 kg ha−1. Results of both greenhouse and field studies showed that as N increased, the negative effect of the weed on the crop was enhanced.

Dodder is a parasitic weed that is troublesome to the growth of many plants. Our study shows that this invasive species contains strong allelopathic potential, exerting strong inhibition against the growth of indicator plants and noxious paddy weeds in bioassay and pot trials. In a greenhouse, incorporation of 0.5 t ha−1 of dried dodder plants to paddy soil reduced spontaneous growth of paddy weeds by about 50%, whereas the 1.5 to 2 t ha−1 dose suppressed biomass of paddy weeds by more than 75% and completely controlled emergence of barnyardgrass and monochoria. By the use of a separation resin, 22 compounds were separated from dodder and identified by gas chromatography–mass spectrometry as belonging to terpenes, long-chain fatty acids, phenols, phenolic acids, and lactone. Among these compounds, 15 substances were quantified and tested for their herbicidal activity. Quantity of cinnamic acid was the highest (37.3 mg g−1), followed by dihydro-5,6-dehydrokavain (DDK; 6.0 mg g−1), myristic acid (3.2 mg g−1), and methyl cinnamate (2.1 mg g−1), whereas the amounts of other compounds were between 0.01 and 0.1 mg g−1. It is suggested that the content of the terpenes within dodder, which was rather high in amount (0.41–2.1 mg g−1), correlated to its strength of chemical cues to find host plants. Cinnamic acid, DDK, methyl cinnamate, and vanillin exerted the most potent herbicidal activities against radish growth. Findings of this study propose that cinnamic acid, DDK, and methyl cinnamate are responsible for its strong phytotoxic action of dodder plants. However, whether these plant growth inhibitors and other compounds detected from the dodder can suppress emergence of their hosts as well as contributing to its strong invasiveness needs further elucidation.

The use of triclopyr for the removal of woody and broad-leaf vegetation in right-of-ways and agricultural settings has been proposed for Alaska. Triclopyr concentrations in soil after application are of concern because residual herbicide may affect growth of subsequent vegetation. In order to measure triclopyr residues in soil and determine the amount of herbicide taken up by the plant, soil bioassays were developed. Four agricultural species, turnip, lettuce, mustard, and radish, were tested to determine sensitivity to triclopyr in a 1-wk bioassay. The sensitivity (I 50) of turnip, lettuce, mustard, and radish was 0.33 ± 0.05 kg ai ha−1, 0.78 ± 0.11 kg ai ha−1, 0.78 ± 0.07 kg ai ha−1, and 0.85 ± 0.10 kg ai ha−1 (mean ± SE), respectively. Mustard was the most consistent crop in the bioassay with a midrange response to triclopyr and lowest standard deviation for germination as compared to the other species. Thus, it was used in a bioassay to determine triclopyr concentrations in a field trial. The bioassay of mustard closely matched residual amounts of triclopyr in a field trial determined by chemical extraction. Estimates of residual triclopyr concentrations using the bioassay method were sometimes less than the triclopyr concentration determined using a chemical extraction. These differences in concentrations were most evident after spring thaw when the chemical extraction determined there was enough triclopyr in the soil to reduce mustard growth over 60%, yet the bioassay measured only a 10% reduction. The chemical extraction method may have identified nonphototoxic metabolites of triclopyr to be the herbicidal triclopyr acid. These methods, when analyzed together with a dose–response curve, offer a more complete picture of triclopyr residues and the potential for carryover injury to other plant species.

Laboratory and greenhouse experiments were conducted to determine the allelopathic potential of centipedegrass. Germination and growth of indicator species were evaluated in soil leachates, leaf debris, and aqueous leaf extracts of centipedegrass. Centipedegrass soil leachates did not inhibit annual bluegrass, goosegrass, henbit, large crabgrass, or perennial ryegrass germination compared with the nonfertilized control. Incorporated centipedegrass leaf debris did not reduce lettuce germination, shoot weight, or root weight compared with the control. However, shoot and root dry weights of radish were reduced with increasing rates of centipedegrass leaf debris. Six and 9 mg debris g−1 soil reduced radish shoot weight by 49 and 64%, respectively, compared with the control. Aqueous leaf extracts of centipedegrass reduced lettuce germination; however, radicle and hypocotyl length were similar to the control. These data do not conclusively suggest centipedegrass has widespread allelopathic activity; however, significant reductions in shoot and root weight of radish with increasing centipedegrass leaf debris demonstrate a pattern of inhibition of one species against another, which fulfills a requirement of allelopathic interactions.

Weeds often limit productivity of organic cropping systems. Radish is a fast-growing, potentially allelopathic cover crop that has the potential to improve weed management in organic systems. To evaluate the effect of radish on density, cover, and biomass of weeds in organically managed corn, 2-yr field experiments were conducted over 4 site years. Four cover-crop planting treatments (fall-only, spring-only, fall + spring, and no cover) were tested in factorial with three cultivation treatments (standard [three to four passes], false seedbed [standard with a false seedbed], and reduced [two passes]). All plots were tilled before planting. Shoot biomass averaged 3,057 kg ha−1 for fall-seeded radish and 385 kg ha−1 for spring-seeded radish. Radish cover crops generally did not improve management of weeds during the corn growing season. However, in the absence of a false seedbed, fall-seeded radish reduced field pennycress density from 9 to < 1 plant m−2 and horseweed density from 6 to 2 plants m−2 in spring in site years where these weeds were present. Fall-seeded radish also reduced cover of summer annual weeds during the fall cover-crop growing season from 4 to 0% in 1 site year, preventing these weeds from setting seed. Radish cover crops did not affect corn grain yield.

Synthetic seed banks are a useful tool for tracking how weed populations change over time. By sowing a known number of seeds of a given species within a quadrat with defined boundaries, an investigator can measure the number remaining and thereby calculate demographic rates (e.g., mortality). The alternative is to use in situ seeds and estimate their initial population density via sampling. To make a synthetic seed bank approach useful within an agricultural system subjected to soil disturbances such as tillage, one would need a way to account for seeds leaving the initial quadrat (i.e., a way to follow how the area encompassing the sown seeds changes over time). Without accounting for the change in location/extent of the synthetic seed bank, any field operation moving soil will create additional uncertainty in population size. Depending on the “aggressiveness” of specific field operations and the initial size of the quadrat, this effect might be negligible or so large as to be intractable. Here, we describe a method for following a synthetic seed bank over time using a “living boundary” of nondormant seeds, which effectively play the role of tracers used in the study of dynamics in other scientific disciplines. Study quadrats in East Lansing, MI, and Arlington, WI, were sown with giant foxtail and velvetleaf at a rate of 2,000 seeds m−2. The study quadrats were marked on the perimeter and diagonals using nondormant seeds of three marker species: kale, radish, and rye. The areas were then subjected to tillage and planting operations. Spatial coordinates of seedling locations for the marker and weed species were obtained through digital image processing. A nonparametric comparison of the spatial displacement of marker and weed species indicated that their empirical spatial distributions did not differ. The marker species quadrats described by the 50th, 90th, and 99th quantiles of movement contained all velvetleaf seedlings in Wisconsin, all velvetleaf seedlings in Michigan, and all giant foxtail seedlings in Michigan, respectively. The results suggest a simple rule for applying the method to field demography studies: after the original quadrat is deformed and seedlings have emerged, flag the polygon containing all marker seedlings to obtain the expanded quadrat containing the study weed population.