The threat of GNSS interference poses a great danger to many critical infrastructure systems including air navigation. With a focus on mitigating this threat, this paper proposes a methodology for detecting GNSS interference. The methodology utilises the quality indicator NACp transmitted in ADS-B messages and GPS almanac data for interference detection. The NACp indicator enables estimation of the position error derived from GPS, which is compared with the HDOP value of the GPS satellite constellation. Based on this comparison, the developed detection algorithm determines whether the aircraft is affected by jamming. The detection methodology is evaluated on datasets obtained during deliberate experiments with GPS jamming. The proposed methodology provides a way to detect GNSS interference, facilitating mitigation of its impact on air traffic operation.

We present an initial analysis of Radio Frequency Interference (RFI) flagging statistics from archived Australian SKA Pathfinder (ASKAP) observations for the ‘Survey and Monitoring of ASKAP’s RFI environment and Trends’ (SMART) project. SMART is a two-part observatoryled project combining analysis of archived observations with a dedicated, comprehensive RFI survey. The survey component covers ASKAP’s full 700–1 800 MHz frequency range, including bands not typically used due to severe RFI. Observations are underway to capture a detailed snapshot of the ASKAP RFI environment over representative 24 h periods. In addition to this dedicated survey, we routinely archive and analyse flagging statistics for all scientific observations to monitor the observatory’s RFI environment in near real-time. We use the telescope itself as a very sensitive RFI monitor and directly assess the fraction of scientific observations impacted by RFI. To this end, flag tables are now automatically ingested and aggregated as part of routine ASKAP operations for all science observations, as a function of frequency and time. The data presented in this paper come from processing all archived data for several ASKAP Survey Science Projects (SSPs). We found that the average amount of flagging due to RFI across the routinely used ‘clean’ continuum science bands is 3%. The ‘clean’ mid band from 1 293 to 1 437 MHz (excluding the 144 MHz below 1293 MHz impacted by radionavigation-satellites which is discarded before processing) is the least affected by RFI, followed by the ‘clean’ low band from 742 to 1 085 MHz. ASKAP SSPs lose most of their data to the mobile service in the low band, aeronautical service in the mid band and satellite navigation service in the 1 510–1 797 MHz high band. We also show that for some of these services, the percentage of discarded data has been increasing year-on-year. SMART provides a unique opportunity to study ASKAP’s changing RFI environment, including understanding and updating the default flagging behaviour, inferring the suitability of and calibrating RFI monitoring equipment, monitoring spectrum management compliance in the Australian Radio Quiet Zone – Western Australia (ARQZWA), and informing the implementation of a suite of RFI mitigation techniques.

RadioTalk is a communication platform that enabled members of the Radio Galaxy Zoo (RGZ) citizen science project to engage in discussion threads and provide further descriptions of the radio subjects they were observing in the form of tags and comments. It contains a wealth of auxiliary information which is useful for the morphology identification of complex and extended radio sources. In this paper, we present this new dataset, and for the first time in radio astronomy, we combine text and images to automatically classify radio galaxies using a multi-modal learning approach. We found incorporating text features improved classification performance which demonstrates that text annotations are rare but valuable sources of information for classifying astronomical sources, and suggests the importance of exploiting multi-modal information in future citizen science projects. We also discovered over 10000 new radio sources beyond the RGZ-DR1 catalogue in this dataset.

The formation of the first stars and galaxies during ‘Cosmic Dawn’ is thought to have imparted a faint signal onto the 21-cm spin temperature from atomic Hydrogen gas in the early Universe. Observationally, an absorption feature should be measurable as a frequency dependence in the sky-averaged (i.e. global) temperature at meter wavelengths. This signal should be separable from the smooth—but orders of magnitude brighter—foregrounds by jointly fitting a log-polynomial and absorption trough to radiometer spectra. A majority of approaches to measure the global 21-cm signal use radiometer systems on dipole-like antennas. Here, we argue that beamforming-based methods may allow radio arrays to measure the global 21-cm signal. We simulate an end-to-end drift-scan observation of the radio sky at 50–100 MHz using a zenith-phased array, and find that the complex sidelobe structure introduces a significant frequency-dependent systematic. However, the $\lambda/D$ evolution of the beam width with frequency does not confound detection. We conclude that a beamformed array with a median sidelobe level ${\sim}-50$ dB may offer an alternative method to measure the global 21-cm signal. This level is achievable by arrays with $O(10^5)$ antennas.

We present a study of scintillation induced by the mid-latitude ionosphere. By implementing methods currently used in Interplanetary Scintillation studies to measure amplitude scintillation at low frequencies, we have proven it is possible to use the Murchison Widefield Array to study ionospheric scintillation in the weak regime, which is sensitive to structures on scales ${\sim}300$ m at our observing frequency of 154 MHz, where the phase variance on this scale was $0.06\, \textrm{rad}^{2}$ in the most extreme case observed. Analysing over 1000 individual 2-min observations, we compared the ionospheric phase variance with that inferred with previous measurements of refractive shifts, which are most sensitive to scales almost an order of magnitude larger. The two measurements were found to be highly correlated (Pearson correlation coefficient 0.71). We observed that for an active ionosphere, the relationship between these two metrics is in line with what would be expected if the ionosphere’s structure is described by Kolmogorov turbulence between the relevant scales of 300 and 2000 m. In the most extreme ionospheric conditions, the refractive shifts were sometimes found to underestimate the small-scale variance by a factor of four or more, and it is these ionospheric conditions that could have significant effects on radio astronomy observations.

We present the first survey of radio frequency interference (RFI) at the future site of the low frequency Square Kilometre Array (SKA), the Murchison Radio-astronomy Observatory (MRO), that both temporally and spatially resolves the RFI. The survey is conducted in a 1 MHz frequency range within the FM band, designed to encompass the closest and strongest FM transmitters to the MRO (located in Geraldton, approximately 300 km distant). Conducted over approximately three days using the second iteration of the Engineering Development Array in an all-sky imaging mode, we find a range of RFI signals. We are able to categorise the signals into: those received directly from the transmitters, from their horizon locations; reflections from aircraft (occupying approximately 13% of the observation duration); reflections from objects in Earth orbit; and reflections from meteor ionisation trails. In total, we analyse 33 994 images at 7.92 s time resolution in both polarisations with angular resolution of approximately 3.5 $^{\circ}$ , detecting approximately forty thousand RFI events. This detailed breakdown of RFI in the MRO environment will enable future detailed analyses of the likely impacts of RFI on key science at low radio frequencies with the SKA.

Classically difficult positioning environments often call for augmentation technology to assist the GPS, or more generally the Global Navigation Satellite System (GNSS) technology. The “Locata” ground-based ranging technology offers augmentation, and even replacement, to GPS in such environments. However, like any other system relying on wireless technology, a Locata positioning network also faces issues in the presence of RF interference (RFI). This problem is magnified due to the fact that Locata operates in the licence-free 2·4 GHz Industrial, Scientific and Medical (ISM) band. The licence-free nature of this band attracts a much larger number of devices using a wider range of signal types than for licensed bands, resulting in elevation of the noise floor. Also, harmonics from out-of-band signals can act as potential interferers. WiFi devices operating in this band have been identified as the most likely potential interferer, due partially to their use of the whole ISM band, but also because Locata applications often also may use a wireless network. This paper evaluates the performance of Locata in the presence of both narrow- and wide-band interfering signals. Effects of received interference on both raw measurements and final solutions are reported and analysed. Test results show that Locata performance degrades in the presence of received interference. It is also identified that high levels of received interference can affect Locata carriers even if the interference is not in co-frequency situation with the affected carrier. Finally, Locata characteristics have been identified which can be exploited to mitigate RFI issues.

Because GPS is a radio navigation system which has a very low power level, it is vulnerable to RFI. Excessive RFI could cause receiver performance degradation, such as degradation of position accuracy, loss of lock and increased acquisition time. After GPS modernization plans introduce dual-frequency civil signals to mitigate ionospheric errors, RFI will remain as one of the dominant threats for differential GPS navigation systems. Examples of safety-critical civil aviation and military missions threatened by RFI include the Local Area Augmentation System (LAAS) and the Joint Precision Approach and Landing System (JPALS). This paper focuses on RFI mitigation through integrity monitoring for a DGPS system like LAAS or JPALS. The mitigation strategy consists of two parts. First, the paper develops a new RFI detection method, using a raw divergence statistic. Second, the paper investigates strategies for maintaining integrity in the case that RFI is detected.

To validate the utility of the divergence-based RFI monitor, this paper takes an experimental approach. The experiments assess the performance of the divergence metric and compare it to existing alternatives for RFI detection, such as metrics for Automatic Gain Control (AGC) and carrier-to-noise ratio (C/N0). Generating a monitoring threshold for these statistics proves challenging, because the threshold depends both on the type of RFI threat (e.g. continuous wave, narrow band, wideband, pulsed) and on environmental conditions, such as temperature. As experiments illustrate, the divergence statistic resolves these limitations, as divergence directly estimates ranging source error, independent of the type of RFI threat or the environmental conditions.