A novel reconfigurable circular microstrip G-slotted antenna having a circularly defected ground structure (DGS) capable of switching its resonance frequency for several microwave applications is presented in this paper. Reconfigurability of the proposed G-slot antenna is obtained by incorporating three PIN diodes. One diode is embedded in the patch and two diodes are integrated into the DGS structure at appropriate places in the slot to achieve four different wireless applications such as aeronautical radio navigation (4.3 GHz with gain 3.6 dB), satellite communication (3.78 GHz with gain 3.7 dB), mobile communication (4.55 GHz with gain 4.0 dB), and WiMAX (3.35 GHz with gain 3.3 dB). These four bands are achieved depending on the different biasing conditions of the three PIN switches used. Antenna performance has been analyzed in ANSYS Electronics Desktop 2018.2 software. The equivalent circuit component of the switching element (PIN diode) has been considered and designed during the simulation. The creative structure lies in the way that it exhibits higher gain with compact size than the previously reported similar antenna. A prototype of the proposed patch antenna has been fabricated on a Roger substrate and its testing and measurement have been performed to demonstrate its desirable characteristics and features.

This paper presents the application of a substrate-integrated waveguide (SIW) for the design of a leaky-wave antenna (LWA). The antenna radiates through a wide slot in the top wall of the SIW structure in the forward direction. The effective width of the slot is varied by changing capacitances of two arrays of varactors connected between slot edges and inserted conducting strips. The radiation pattern of the antenna is by this way controlled by DC bias, which sets the capacitances of varactors. The maximum radiation direction in elevation can be varied within 35° by changing the DC bias from 2 to 12 V. This elevation angle is measured from the broad side direction perpendicular to the antenna substrate. The measured antenna characteristics are in accord with those predicted by simulation. The antenna can be simply fabricated by a planar circuit board technology.

In this paper, a compact stepped slot antenna for ultra-wideband (UWB) applications is proposed. A very small size and UWB bandwidth operation are achieved by integrating a stepped slot in the back side of the antenna. This stepped slot is excited by using a 50 Ω-feed line in the top side of the antenna. The antenna is characterized by an impedance bandwidth between 3.05 GHz and more than 12 GHz. The dimensions of the antenna are 17 mm × 8 mm × 1.27 mm, which leads to the most compact size compared with other works in the literature. The integrated stepped slot is divided into additional elementary slots, where each elementary slot has a matching point. Adding these elementary slots allows to increase further the operating bandwidth. The radiation pattern of the compact stepped slot antenna is omnidirectional in the H-plane and bidirectional in the E-plane. The measurement results agree well with the simulated ones in terms of impedance matching and radiation pattern.

A new wideband multiple-input/multiple-output (MIMO) antenna system able to operate in a frequency band ranging between 3.3 and 7.1 GHz is proposed for fifth-generation (5G) new radio applications for future smartphones. The design structure contains four pairs of compact microstrip-fed slot antennas, located at the corners of an FR-4 printed circuit board. Each pair of antennas consists of a radiator with two concentric annular slots, fed by two L-shaped microstrip-feeding lines and provides polarization and radiation pattern diversity function due to the orthogonal placement of their feed-line. In order to reduce the mutual coupling characteristic, we have inserted a rectangular slot under each microstrip feed-line. Besides, we have coupled and linked the two rings by a small gap to combine and move the resonant modes so as to achieve wideband coverage. The measured and simulated results show that the proposed design achieves the desired performance, such as isolation >12 dB, a total efficiency >48%, and an envelope correlation coefficient <0.07. In addition, the radiation pattern, the total efficiency, the realized gain, and the channel capacity are also studied. According to the reached results, the proposed MIMO antenna may be a suitable application-oriented design for 5G mobile communication.

The paper researches a kind of wideband dual-polarized Vivaldi antenna with improved balun feed which consists of slot line and two bent coplanar strip lines. The whole of antenna structure is composed of two orthogonal Vivaldi antenna elements, and the mode of feeding adopts electromagnetic coupling from micro-strip line to slot line. The improved balun can avoid the intersection of transmission lines, reduce the size, and simplify the assembly. The electromagnetic simulation and optimization design of proposed antenna are carried out by using electromagnetic simulation software, CST. Simulation results show that the isolation between two polarized ports is more than 15 dB within working frequency range of 2–3.5 GHz and VSWRs of two ports are lower than 2.5 at the range of 2–3.5 GHz. The designed antenna is fabricated and measured. The measured results indicate that the designed antenna achieves anticipated patterns and feasible design of the dual-polarized Vivaldi antenna. The dual-polarized Vivaldi antenna with improved balun feed is suitable for some application fields, such as passive electronic reconnaissance, passive radar, and wideband communication and detection.

Radio-frequency identification (RFID) technology is a consolidated example of wireless power transfer system in which passive electromagnetic labels called tags are able to harvest electromagnetic energy from the reader antennas, power-up their internal circuitry and provide the automatic identification of objects. Being fully passive, the performance of RFID tags is strongly dependent on the context, so that the selection of the most suitable tag for the specific application becomes a key point. In this work, a cost-effective but accurate system for the over-the-air electromagnetic characterization of assembled UHF RFID tags is firstly presented and then validated through comparison with a consolidated and diffused measurement systems. Moreover, challenging use-cases demonstrating the usefulness of the proposed systems in analyzing the electromagnetic performance of label-type tags also when applied on different material or embedded into concrete structures have been carried out.

In this paper, a three layered stacked circularly polarized rectangular dual band microstrip antenna with a defected ground structure (DGS) and a feed network with stub (showing dual wideband characteristic) is designed, fabricated, and tested for WLAN, Zig bee, Wi-Max, and IMT band applications. The proposed antenna is fabricated on an FR4 substrate with dielectric constant (εr) of 4.4; tanδ of 0.0024 and a height of 1.57 mm.The antenna has a surface area of 4.8 × 4.1 cm2 and a total height of 5.1 mm. The designed antenna covers two wireless bands from 2.39 to 2.64GHz and 3.39–3.76 GHZ with impedance bandwidths (VSWR < 2) of 250 MHz (9% bandwidth centered at 2.515 GHz) and 370 MHz (10% bandwidth centered at 3.57 GHz), respectively. This antenna is capable of covering IEEE 802.11b/g/n standards of WLAN from 2.4 to 2.485 GHz, bluetooth applications from 2.4 to 2.483 GHz, ZigBee applications from 2.4 to 2.485 GHz, IEEE 802.16/ Wi-MaX applications from 3.4 to 3.69 GHz and international mobile telecommunications (IMT) band from 3.4 to 3.6 GHz. As the antenna is circularly polarized, the misalignment of the receiver with transmitter does not affect the performance of the system. The antenna designing was done using CST MWS V'10 and the prototype of the designed antenna was tested for the validation of S11 (dB) and gain results against the simulated ones experimentally. The proposed antenna shows a gain of 4.08 dBi at 2.5 GHz and a gain of 5.024 dBi at 3.51 GHz.

In this paper, a dual wideband microstrip antenna (MSA) has been presented for wireless local area networks (WLAN), worldwide interoperability for microwave access (Wi MaX) and U-NII band applications. The antenna is designed and simulated using CSTMWS V'10. The main goal of this paper is to get multi-frequency behavior by cutting resonant slots into the patch of the antenna and a wideband antenna behavior using an aperture coupled feeding method. The designed antenna has a semi-spiral G-shaped compact structure and an electromagnetically coupled feeding mechanism (aperture-coupled feeding). It is fabricated on an FR4 substrate with a dielectric constant of 4.4 and a dielectric loss tangent of 0.009. The testing of prototype antenna (to measure S11) is done using a vector network analyzer. The measured results are 80% matching to the simulated ones. The parametric study, simulation results, measured results, and applications of the MSA for WLAN, WiMAX, and the FCC unlicensed 5.2 GHz National Information Infrastructure (U-NII) bands are presented in the paper. The antenna shows a simulated gain of about 4.5 dB at the three wireless application bands.

In this paper, the far-field pattern of a Cassegrain reflector is formulated. A novel illumination function is used to approximate the field distribution at the aperture of the reflector. The defined illumination function takes into account the central aperture blockage created by the subreflector. Using the illumination function, a closed-form expression describing the far-field radiation pattern of the Cassegrain reflector is formulated. The radiation pattern obtained from the derived equation is compared with the results obtained from physical optics and physical theory of diffraction. The results are found to be consistent with each other. It is found that the derived results show an impressive accuracy of 99.8% over the main-lobe region. The accuracy is found to be over 91 and 84% for the first and second significant side-lobe region, respectively, which can be considered satisfactory for many applications.