We have experimentally investigated the collisionless shock acceleration of ions via the interaction of a relativistic intensity (3 × 1019 W/cm2), 1.053 µm wavelength laser pulse with an underdense plasma. This plasma is formed through the use of a novel cluster jet design that allows for control of the plasma peak density and front scale length without the use of additional plasma-forming laser pulses. When the front density scale length of the target plasma is less than 60 µm, the laser pulse (1 J, 400 fs) is capable of launching an electrostatic shock wave that accelerates a proton beam. This beam is shown to have a narrow divergence angle of 0.8°, a peak flux of 14 × 106 protons/sr with an ion energy exceeding 440 keV. Particle-in-cell simulations indicate this narrow ion beam is produced by converging shocks generated via filamentation of the laser pulse in high-density (near critical) plasma.

We report on the design and characterization of the plasma mirror system installed on the J-KAREN-P laser at the Kansai Photon Science Institute, National Institutes for Quantum Science and Technology. The reflectivity of the single plasma mirror system exceeded 80%. In addition, the temporal contrast was improved by two orders of magnitude at 1 ps before the main pulse. Furthermore, the laser near-field spatial distribution after the plasma mirror was kept constant at plasma mirror fluence of less than 100 kJ/cm2. We also present the results of investigating the difference and the fluctuation in energy, pulse width and pointing stability with and without the plasma mirror system.

The rapid development of high-intensity laser-generated particle and photon secondary sources has attracted widespread interest during the last 20 years not only due to fundamental science research but also because of the important applications of this developing technology. For instance, the generation of relativistic particle beams, betatron-type coherent X-ray radiation and high harmonic generation have attracted interest from various fields of science and technology owing to their diverse applications in biomedical, material science, energy, space, and security applications. In the field of biomedical applications in particular, laser-driven particle beams as well as laser-driven X-ray sources are a promising field of study. This article looks at the research being performed at the Institute of Plasma Physics and Lasers (IPPL) of the Hellenic Mediterranean University Research Centre. The recent installation of the ZEUS 45 TW laser system developed at IPPL offers unique opportunities for research in laser-driven particle and X-ray sources. This article provides information about the facility and describes initial experiments performed for establishing the baseline platforms for secondary plasma sources.

We demonstrate an all-optical method for controlling the transverse motion of an ionization injected electron beam in a laser plasma accelerator by using the transversely asymmetrical plasma wakefield. The laser focus shape can control the distribution of a transversal wakefield. When the laser focus shape is changed from circular to slanted elliptical in the experiment, the electron beam profiles change from an ellipse to three typical shapes. The three-dimensional particle-in-cell simulation result agrees well with the experiment, and it shows that the trajectories of these accelerated electrons change from undulating to helical. Such an all-optical method could be useful for convenient control of the transverse motion of an electron beam, which results in synchrotron radiation from orbit angular momentum.

In this work, we optimized a clean, versatile, compact source of soft X-ray radiation $(E_{\text{x}\text{-}\text{ray}}\sim 3~\text{keV})$ with an yield per shot up to $7\times 10^{11}~\text{photons}/\text{shot}$ in a plasma generated by the interaction of high-contrast femtosecond laser pulses of relativistic intensity $(I_{\text{las}}\sim 10^{18}{-}10^{19}~\text{W}/\text{cm}^{2})$ with supersonic argon gas jets. Using high-resolution X-ray spectroscopy approaches, the dependence of main characteristics (temperature, density and ionization composition) and the emission efficiency of the X-ray source on laser pulse parameters and properties of the gas medium was studied. The optimal conditions, when the X-ray photon yield reached a maximum value, have been found when the argon plasma has an electron temperature of $T_{\text{e}}\sim 185~\text{eV}$, an electron density of $N_{\text{e}}\sim 7\times 10^{20}~\text{cm}^{-3}$ and an average charge of $Z\sim 14$. In such a plasma, a coefficient of conversion to soft X-ray radiation with energies $E_{\text{x}\text{-}\text{ray}}\sim 3.1\;(\pm 0.2)~\text{keV}$ reaches $8.57\times 10^{-5}$, and no processes leading to the acceleration of electrons to MeV energies occur. It was found that the efficiency of the X-ray emission of this plasma source is mainly determined by the focusing geometry. We confirmed experimentally that the angular distribution of the X-ray radiation is isotropic, and its intensity linearly depends on the energy of the laser pulse, which was varied in the range of 50–280 mJ. We also found that the yield of X-ray photons can be notably increased by, for example, choosing the optimal laser pulse duration and the inlet pressure of the gas jet.

The multi-petawatt (PW) lasers currently being built in Europe as part of the Extreme Light Infrastructure (ELI) project will be capable of generating femtosecond light pulses of ultra-relativistic intensities (~1023–1024 W/cm2) that have been unattainable so far. Such laser pulses can be used for the production of high-energy ion beams with unique features that could be applied in various fields of scientific and technological research. In this paper, the prospect of producing ultra-intense (intensity ≥1020 W/cm2) ultra-short (pico- or femtosecond) high-energy ion beams using multi-PW lasers is outlined. The results of numerical studies on the acceleration of light (carbon) ions, medium-heavy (copper) ions and super-heavy (lead) ions driven by a femtosecond laser pulse of ultra-relativistic intensity, performed with the use of a multi-dimensional (2D3 V) particle-in-cell code, are presented, and the ion acceleration mechanisms and properties of the generated ion beams are discussed. It is shown that both in the case of light ions and in the case of medium-heavy and super-heavy ions, ultra-intense femtosecond multi-GeV ion beams with a beam intensity much higher (by a factor ~102) and ion pulse durations much shorter (by a factor ~104–105) than achievable presently in conventional radio frequency-driven accelerators can be produced at laser intensities of 1023 W/cm2 predicted for the ELI lasers. Such ion beams can open the door to new areas of research in high-energy density physics, nuclear physics and inertial confinement fusion.

We present a broad study of linear, clustered, noble gas puffs irradiated with the frequency doubled (527 nm) Titan laser at Lawrence Livermore National Laboratory. Pure Ar, Kr, and Xe clustered gas puffs, as well as two mixed-gas puffs consisting of KrAr and XeKrAr gases, make up the targets. Characterization experiments to determine gas-puff density show that varying the experimental parameter gas-delay timing (the delay between gas puff initialization and laser-gas-puff interaction) provides a simple control over the gas-puff density. X-ray emission (>1.4 keV) is studied as a function of gas composition, density, and delay timing. Xe gas puffs produce the strongest peak radiation in the several keV spectral region. The emitted radiation was found to be anisotropic, with smaller X-ray flux observed in the direction perpendicular to both laser beam propagation and polarization directions. The degree of anisotropy is independent of gas target type but increases with photon energy. X-ray spectroscopic measurements estimate plasma parameters and highlight their difference with previous studies. Electron beams with energy in excess of 72 keV are present in the noble gas-puff plasmas and results indicate that Ar plays a key role in their production. A drastic increase in harder X-ray emissions (X-ray flash effect) and multi-MeV electron-beam generation from Xe gas-puff plasma occurred when the laser beam was focused on the front edge of the linear gas puff.

The paper presents results of two-dimensional particle-in-cell simulations of ion beam acceleration at the interactions of a 130-fs laser pulse of intensity in the range 1021–1023 W/cm2, predicted for the Extreme Light Infrastructure lasers, with thin hydrocarbon (CH) or erbium hydride (ErH3) targets. A special attention is paid to the effect of the laser pulse intensity and polarization (linear, circular) on the proton energy spectrum, the proton beam spatial distribution and the proton pulse shape and intensity. It is shown that for the low laser intensities (~1021 W/cm2) considerably higher proton beam parameters (proton energies, beam intensities) are achieved for the ErH3 target for both polarizations and the effect of polarization on the beam parameters is significant (higher parameters are achieved for the linear polarization). However, for the highest, ultra-relativistic intensities (~1023 W/cm2) higher proton beam parameters are attained for the CH target and the effect of polarization on these parameters is relatively low. In this case, for both polarizations quasi-monoenergetic proton beams are generated from the CH target of the mean proton energy ~2 GeV and $dE_{\rm p} /\bar E_{\rm p} \approx 0.3$ for the linear polarization and $dE_{\rm p} /\bar E_{\rm p} \approx 0.2$ for the circular one. At the highest laser intensities also the proton pulse peak intensities are higher for the CH target and for both polarizations they reach values well above 1021 W/cm2. In the paper, the properties of proton beam generation indicated above are discussed in detail and a physical explanation of the observed effects is done.

In this work, a laser-produced plasma source was used to create xenon (Xe) photoionized plasmas. An extreme ultraviolet (EUV) radiation beam was focused onto a gas stream, injected into a vacuum chamber synchronously with the EUV pulse. Energies of photons exceeding 100 eV allowed for inner-shell ionization of Xe atoms. Creation of N-shell vacancies resulted in N-shell fluorescence and was followed by multiple ionization. Time-integrated EUV spectra, corresponding to excited states in Xe II–V ions, were recorded. Several emission lines detected in the 39–65 nm wavelength range were not reported earlier. They were not identified due to lack of a corresponding information in published databases. Except spectral measurements in the EUV range, time resolved ultraviolet and visible spectra, originating from Xe II and III ions, were recorded. For spectral lines, corresponding to radiative transitions in Xe II ions, electron temperature was calculated based on a Boltzmann plot method. Based on this method the temperature was measured for different time delays according to the driving EUV pulses.

Using two-dimensional particle-in-cell simulations, the properties of a proton beam generated from a thin erbium hydride target irradiated by a 25 fs laser pulse of intensity ranging from 1020 to 1021 W/cm2 are investigated and compared with the features of a proton beam produced from a hydrocarbon (CH) target. It is shown that in case of using the hydride target the mean proton energy and the number of high-energy (>10 MeV) protons as well as the peak proton pulse intensity can be higher by a factor ~10 than the ones obtained from the CH target.

In this work, two laser-produced plasma (LPP) sources – extreme ultraviolet (EUV) and a LPP soft X-ray (SXR) source were used to create Ne photoionized plasmas. A radiation beam was focused onto a gas stream, injected into a vacuum chamber synchronously with the radiation pulse. EUV radiation spanned a wide spectral range with pronounced maximum centered at λ≈11 nm, while in case of the SXR source spectral maximum was at λ≈1.4 nm. Emission spectra of photoionized plasmas created this way were measured in a wide spectral range λ = 10–100 nm. The dominating spectral lines originated from singly charged ions (Ne II) and neutral atoms (Ne I). For the highest radiation fluence, spectral lines originating from Ne III and even Ne IV species were detected. Differences between the experimental spectra, obtained for all irradiation conditions, were analyzed. They were attributed either to different fluence or spectral distribution of driving photons.

In this work, a laser-produced plasma extreme ultraviolet source and a free electron laser were used to create Ne photo-ionized plasmas. In both cases, a radiation beam was focused onto a gas stream injected into a vacuum chamber synchronously with the radiation pulse. Extreme ultraviolet radiation from the plasma spanned a wide spectral range with pronounced maximum centered at λ = 11 ± 1 nm while the free electron laser pulses were emitted at a wavelength of 32 nm. The power density of the focused plasma radiation was approximately 2 × 107 W/cm2 and was seven orders of magnitude lower compared with the focused free electron laser beam. Radiation fluences in both experimental conditions were comparable. Despite quite different spectral characteristics and extremely different power densities, emission spectra of both photo-ionized plasmas consist of the same spectral lines within a wavelength range of 20 to 50 nm, however, with different relative intensities of the corresponding lines. The dominating spectral lines originated from singly charged ions (Ne II); however, Ne III lines were also detected. Additionally, computer simulations of the emission spectra, obtained for photo-ionized plasmas, driven by the plasma extreme ultraviolet source, were performed. The corresponding measured and calculated spectra are presented. An electron temperature and ionic composition were estimated. Differences between the experimental spectra, obtained for both irradiation conditions, were analyzed. The differences were attributed mainly to different energies of driving photons.

The physical phenomena of plasma plume generation and plasma expansion by target-laser interaction are considered for moderate laser power density. The kinetics of target vaporization, atom ionization, and plasma heating are described. The mechanism of electric sheath formation near the surface, electron emission from the target, and the electrical breakdown phenomena by laser irradiation are analyzed. The plasma expansion is described taking into account the near target plasma structure and the absorption of the laser radiation. The mechanisms accelerating the plasma and generating an electric field in it are discussed. The work reviews experiments and theoretical models and summarizes the results in order to understand the measurements and to discuss open questions. As example, the plasma parameters (electron temperature and density, degree of ionization, and plasma velocity) are calculated for an Ag target using the developed model that considers self-consistently the target heating, kinetics of target evaporation, plasma heating, and ion flux to the target. The calculated ion velocity in the expanding plasma jet is in accordance with the measurement. The ion energy linearly depends on the ion charge state, as observed experimentally.

Energy enhancement by a circularly polarized laser pulse during acceleration of the electrons by a Gaussian laser pulse has been investigated. The electrons close to the temporal peak of the laser pulse show strong initial phase dependence for a linearly polarized laser pulse. The energy gained by the electrons close to the rising edge of the pulse does not show initial phase dependence for either linearly- or circularly-polarized laser pulse. The maximum energy of the electrons gets enhanced for a circularly polarized in comparison to a linearly polarized laser pulse due to axial symmetry of the circularly polarized pulse. The variation of electron energy with laser spot size, laser intensity, initial electron energy, and initial phase has been studied.

Ion acceleration by short, high intensity laser pulses in sets of small targets is treated by an analytical model developed here, and by two-dimensional particle-in-cell simulations. When an intense short laser pulse illuminates a thin foil target at normal incidence, electrons in the target are accelerated by the ponderomotive force. At the rear surface of the foil they generate a strong electric field that accelerates the ions, and generates an ion beam of small divergence. Using a mass-limited small target like a droplet enhances the ion energy, but increases divergence at the same time. In this paper, a combination of several-micron targets in a periodic structure (for example, a droplet chain) is proposed in order to increase the conversion efficiency from the incident laser beam to the emergent protons. Improvement of the energy flux conversion efficiency from the laser to the ion beam at optimal conditions is demonstrated.

An experimental study on the angular distribution and conversion of multi-keV X-ray sources produced from 2 ns-duration 527nm laser irradiated thick-foil targets on Shenguang II laser facility (SG-II) is reported. The angular distributions measured in front of the targets can be fitted with the function of f(θ) = α+ (1−α)cosβθ (θ is the viewing angle relative to the target normal), where α = 0.41 ± 0.014, β = 0.77 ± 0.04 for Ti K-shell X-ray sources (~4.75 keV for Ti K-shell), and α = 0.085 ± 0.06, β = 0.59 ± 0.07 for Ag/Pd/Mo L-shell X-ray sources (2–2.8 keV for Mo L-shell, 2.8–3.5 keV for Pd L-shell, and 3–3.8 keV for Ag L-shell). The isotropy of the angular distribution of L-shell emission is worse than that of the K-shell emission at larger viewing angle (>70°), due to its larger optical depth (stronger self-absorption) in the cold plasma side lobe surrounding the central emission region, and in the central hot plasma region (emission region). There is no observable difference in the angular distributions of the L-shell X-ray emission among Ag, Pd, and Mo. The conversion efficiency of Ag/Pd/Mo L-shell X-ray sources is higher than that of the Ti K-shell X-ray sources, but the gain relative to the K-shell emission is not as high as that by using short pulse lasers. The conversion efficiency of the L-shell X-ray sources decreases with increasing atomic numbers (or X-ray photon energy), similar to the behavior of the K-shell X-ray source.

Laser produced ion beams have a large divergence angle and a wide energy spread. To our knowledge, this is the first demonstration of collimation and monochromatisation of laser accelerated proton beams, using a permanent quadrupole magnet lens system. It acts as a tunable band pass filter by collimating or focusing the protons with the same energy. Because it gathers nearly the whole proton emission, a strong enhancement of the beam density appears. For the collimated beam, an increase of the proton density in the (3.7 ± 0.3) MeV energy band up to a factor of ~30, from possible 40, relative to the non-collimated beam is demonstrated. With the help of this simple, reliable, and well established technique new perspectives will be opened for science and technology, monoenergetic ion beams can be attained in any lab, where a source of laser accelerated ions exist. This finding enables to apply afterward well known beam steering techniques to the formed ion beam, which are applied in conventional accelerators to manipulate the beam parameters or to transport the beams and make them use in many application.

We describe a direct model for simulation of relativistic electrons acceleration with a given electromagnetic field which is determined by wave packet parameters. The multimode time-spatial structure of a focused Nd-laser beam with stochastic phase disturbances of each spectral component is taken into account as a source of random forces. Electron energies of more than 10 MeV are obtained even at moderate flux densities of 1016 W/cm2. The developed numerical code makes it possible to obtain a quantitative energy distribution function in relation to both field intensity and the temporal bell-shape of the laser pulse. The efficient heating of electrons can be triggered in the presence of a counter propagating wave being reflected from the critical plasma area with a different reflection coefficient. The heating mechanism occurs with a delay relative to the beginning of the pulse when the laser fields exceed some threshold amplitudes. The qualitative comparison of simulation results with the experimental data is given as evidence that this mechanism is reasonable.

Electron acceleration by a chirped laser pulse in an azimuthal magnetic field in a plasma has been studied. The betatron resonance saturates and the electrons start losing energy beyond a specific point of time without a frequency chirp. The resonance can be maintained for a longer duration and the energy of the electrons can be enhanced if a suitable frequency chirp is introduced. The duration of interaction increases for a lower plasma density or a lower initial electron energy which causes increase in the electron energy gain. The value of magnetic field required for resonance increases with an increase in plasma density and with a decrease in initial electron energy.

We report and discuss experimental results on the propagation of CPA pulses of moderately relativistic intensity in gas: they evidence the effects of the precursor pedestals of the main pulse. Details of great interest were observed for the first time with high quality femtosecond 90-degree interferometry. The interferometric data are also correlated with imaging and spectroscopy data of laser pulse transmitted through the gas. The most relevant physical features are confirmed by a numerical code which simulates the laser pulse propagation self-consistently with the ionization of the gas. We found that in this regime, the propagation of the intense femtosecond pulse is basically stable apart from very weak refractive effects. In order to allow propagation at fixed intensity along an optical path larger than the Rayleigh range, we performed a first successful attempt at producing hollow plasma channels able to guide the pulse.