This paper proposes fractal-inspired array antennae for wideband applications. The proposed antennae have a resonance frequency range of 20–40 GHz. The modified fractal antennae are fabricated with a height of 1.6 mm, substrate width, and length of 100, 50, 25, and 18.75 mm2, and a simulated result shows that the gain is increased to 11.04, 11.9, 8.4, and 6 dBi, and the designed antennae radiate power with directivity of 11.3, 13.4, 9.29, and 7.17 dBi concerning proposed designs A, B, C, and D, respectively. The proposed antennae with 5G New Radio (NR) bands have more radiation concerning resonate frequencies in the 20–40 GHz range with Φ = 0°, Φ = 90°, and θ = 90°. Moreover, the bandwidths for applications covered in the 5G NR and sub-6G are 1.92, 0.73, 0.7, 2.4, 1.3, 5.3, and 1.26 GHz, and 3.4, 3.7, 2.67, and 4.65 GHz, and 2, 3.5, and 1.57 GHz, and 2.5, 1.5, and 1.0 GHz with the maximum return loss of 37 dB, 32.8 dB, 31.2 dB, and 23 dB with corresponding resonate frequencies as 21.5, 27.6, 33, and 27.6 GHz concerning designs A, B, C, and D, respectively. The proposed antennae have been implemented and validated using Computer Simulation Technology (CST), Vector Network Analyzer (VNA), spectrum analyzer, and power sensor.

Space-based automatic dependent surveillance-broadcast (ADS-B) receivers can cover thousands of aircraft, each transmitting 6 ⋅ 2 signals per second. As a result, ADS-B signals are very prone to overlap. When the number of aircraft covered by a receiver reaches 3,000, about 90 % of the signals will be overlapping. Overlapped signals can reduce the decoding accuracy of receivers, so that aircraft information cannot be accurately transmitted to the air traffic control (ATC) surveillance system, hence threatening aviation flight safety. It is necessary to propose signal separation algorithms for space-based ADS-B systems. An orthogonal projection linear constrained minimum variance (OPLCMV) algorithm is proposed, which can separate two signals simultaneously based on the linearly constrained minimum variance algorithm by exploiting the characteristics of overlapped signals. Compared with the state-of-the-art extended projection algorithm and the fast independent component analysis algorithm, the OPLCMV method has a higher decoding accuracy for multiple overlapping signals with a small direction difference of arrival or frequency shift. Moreover, the OPLCMV algorithm has a low computational complexity when the number of overlapped signal sources is less than seven.

E-plane sectoral horn antenna based on printed ridge gap waveguide (PRGW) technology is designed for 5G applications. It is implemented on the top plate of the PRGW structure to avoid the losses and dispersion associated with conventional feeding mechanisms. The quasi-transverse electromagneticPRGW-based antenna is excited through a planar microstrip transition. First, the single horn antenna element is introduced with the microstrip feeding section. It shows an impedance bandwidth of fractional bandwidth 26% from 45.7 to 55.4 GHz with the realized gain of 12.7 dBi and radiation efficiency of 90%. In order to maximize the realized gain, a four-element linear horn array is introduced. The same impedance bandwidth is maintained with the array having a gain of 18.6 dBi from 45.7 to 55.4 GHz. The overall antenna array performance in the entire operating frequency range is stable with a radiation efficiency around 85%. Three matching sections are implemented to achieve better impedance matching. One is used to match the horn with the feeding aperture via the PRGW line. Another section is designed to match microstrip transition with PRGW ridge. Finally, two-stage quarter wavelength transformers are required to match the power divider with the array feeding network. A prototype of single-element horn antenna was fabricated to verify the concept of the design. Simulated and measured results show that the proposed antenna can operate in the frequency band of 45–55 GHz with good agreement of radiation performance. Moreover, the proposed designs are implemented and simulated using two microwave simulation tools (CST and HFSS) to verify the radiation performance, which exhibits good agreement. The design of an E-sectoral horn antenna and its array with high gain based on PRGW is demonstrated for the first time which is considered a novel issue. It can be integrated with other passive and active elements in communication systems. Thus, it can be a valuable component in 5G communication due to its high gain, compact size and ultra-wide band.

A novel wide 3-dB axial ratio (AR) circularly polarized 2 × 2 array antenna is proposed in this paper. The spindle-shaped coupling cavity with tilted waveguide is capable of generating circular polarization waves from incident linear waves, which improves the AR bandwidth (ARBW) of the antenna. With this structure, a similar amplitude of the two orthogonal transmitted wave components and a stable phase difference of nearly 90° can be generated. The circularly polarized antenna proposed herein has been fabricated. According to the measurement results, the operating bandwidth from 5.32 to 6.13 GHz is <−10 dB. In addition, the measured ARBW, which is below 3 dB, can cover the range of 5.41–6.02 GHz. The maximum gain of the antenna can attain 15.65 dBi, and the efficiency is better than 80%.

In this paper, a semi-flexible 2 × 1 array antenna is proposed with epoxy glass fiber and graphene as patch and ground, respectively. Microstrip patch antenna with a center parasitic patch of half-wavelength and slot in the radiating patch have been incorporated for the bandwidth enhancement in order of 79.56% (2.21–5.13 GHz). The antenna has an overall size of 0.30λ × 0.24λ at a lower frequency of operation (2.45 GHz). The incorporation of slotted Graphene in radiating element leads to a wideband regime with satisfactory gain values of 2.73 and 3.744 dBi at 2.40 and 4.0 GHz, respectively. Antenna radiation efficiency in the range of 78% with linear polarization makes the antenna appropriate for WLAN band and smart wireless devices application.

Array antenna beam forming has high potential to improve the performance of the global navigation satellite system (GNSS) in urban areas. However, the widespread application of array antennas for GNSS multipath mitigation is restricted by many factors, such as the complexity of the system, the computation load and conflicts between required performance, cost budget and limited room for the antenna placement. The scope of this work is triplicate. (1) The pre-correlation beam forming structure is first suggested for multipath mitigation to decrease the system complexity. (2) With the pre-correlation structure, the equivalence of adaptive beam forming to quiescent beam forming is revealed. Therefore, the computational load for beam forming is greatly decreased. (3) A theoretical model is established to link the benefits of beam forming with GNSS performance improvement in terms of pseudorange quality. The model can be used by industry to balance the aforementioned restrictions. Numerical results with different array settings are given, and a 2 × 2 rectangle array with $0.4\lambda $ element spacing is suggested as a cost-effective choice in GNSS positioning applications in urban canyon areas.

In this paper, a multiple input multiple output antenna which operates at 5.8 GHz for wireless local area network applications is proposed. The proposed antenna is composed of two sets of four elements antenna array (2 × 2) on the top and a novel metamaterial structure on the ground plane. Here, the ground plane, which includes a lattice of 2 × 5 unit cells of metamaterial structure, is utilized in order to improve parameters of the antenna. Thanks to the proposed metamaterial structure, not only gain and bandwidth of antenna are enhanced, but also mutual coupling is reduced. The final design, with an overall size of 137 × 77 × 3.048 mm3, resulted in a |S11| <−10 dB bandwidth of 1.78 GHz and a peak gain of 9.2 dBi. In addition, the isolation is higher than 18 dB although the close separation from edge to edge of the two antennas is only 2 mm and radiation efficiency of 73% at the operating frequency band. All is simulated based on CST Studio software and the simulated S-parameter results of the antenna are in good agreement with measurement results.

We investigate a strategy to address the problem of low aircraft detection probability of space-based Automatic Dependent Surveillance-Broadcast (ADS-B). A nineteen-element hexagonal array and adaptive multi-beamforming method is proposed. This method aims to adjust the beam pattern dynamically to reduce signal collision and enlarge coverage. With the focus on the mission requirement of global aircraft detection by 2020, the appropriate gain and direction of beams are studied and designed in detail. Theoretical analysis and simulations show that this adaptive multi-beam antenna can greatly improve flight detection probability at an average reporting interval from 10 seconds to 5 seconds when compared with the traditional fixed multi-beam antenna. The results of this work show that the design of a 19-element antenna along with the adaptive multi-beamforming method can be considered as a building block of future space-based ADS-B.

We address transmission between array antennas in the Fresnel region, where there is a difference between the theoretical and actual transmission efficiencies. In particular, we focus on the effect of synthesis loss in the receiving antenna's power combiner circuit caused by amplitude and phase differences among the signals received by the elements. We designed 24 GHz array antennas and investigated the effect of synthesis loss on transmission efficiency via simulation. The synthesis loss was found to increase for smaller transmitting antenna sizes and larger receiving antenna sizes. In addition, to clarify the origin of the discrepancy between the theoretical and actual efficiency values and accurately estimate the efficiency, we defined four other loss factors and calculated them via simulation. Based on the results obtained, we propose an approximate equation for transmission efficiency in terms of synthesis loss and aperture efficiency. Finally, we calculate the efficiency with the effect of the loss factors included and confirm that the calculated and measured efficiencies are almost identical.

In this paper, an array antenna with asymmetric antenna fed network is presented. Total size of the proposed array antenna (with 2 × 2 elements) is 90 × 90 mm2 and distance between elements (fed by fed) is λ0/2 (λ0 = wavelength in free space). The proposed antenna is fed by coaxial cable that isolated input impedance from impedance of the array antenna feed network. The measured impedance bandwidth of the coaxial fed circular polarization array (S11 < −10 dB) is 47.9% from 4.6 to 7.5 GHz (1.63:1), and the measured 3-dB axial-ratio bandwidth is 42% from 4.7 to 7.2 GHz. The peak gain of antenna is 9.1 dBic.

This paper presents a novel technique to design a Rotman lens feeding a wide bandwidth microstrip patch antenna array for 60 GHz radio frequency identification (RFID) applications. The proposed scheme supports both location positioning and increases the communication range through beam forming. The antenna array is designed using λ/4 microstrip transmission lines to support high gain, directivity, and bandwidth. The progressive phase delay using the Rotman lens is realized independently using transmission lines to reduce the complexity of the design and improve the performance parameters. The dummy ports are terminated by λ/4 radial stubs which eliminates the need for via holes and expensive connectors which reduces the fabrication costs.