Across the southeastern United States, pyridine carboxylic acid herbicides are widely used for broadleaf weed control in permanent grass pastures. This family of herbicides has proved very successful for controlling most broadleaf weeds commonly present in southeastern pastures and hayfields. In the southern United States, producers have expressed concern when overseeding legume species into warm-season perennial sods following application of commonly used pyridine carboxylic acid herbicides, as legumes are generally highly sensitive to this herbicide family. Field experiments were established to evaluate two herbicide treatment programs (residual vs nonresidual) on crimson clover overseeded into bermudagrass sod. The residual herbicide program included aminopyralid plus 2,4-D (0.09 + 0.7 kg ae ha–1), and the nonresidual program included triclopyr plus fluroxypyr (0.63 + 0.21 kg ae ha–1) plus 2,4-D (1.12 kg ae ha–1). Herbicide programs were applied at two key timings: in spring (May) and early summer (June). Spring applications were also evaluated when used in single vs repeated annual application. Our results did not indicate soil residual herbicide issues for crimson clover planted in the fall following spring or early-summer application of aminopyralid + 2,4-D at either location. Additionally, there were no cumulative negative impacts on crimson clover following 2 yr of spring herbicide application. Crimson clover cover, however, strongly decreased as grass and weed cover increased––an event that may be related to greater interspecific competition at higher levels of grass and weed cover. Soil fertility, weather, and competition from resident annual grasses and weeds strongly influenced productivity, suggesting that changes in pasture dynamics had a greater influence on clover productivity than did herbicide treatment or timing of application.

Research conducted in the field identified 14 injury criteria associated with dicamba (Clarity® diglycolamine salt) applied at 0.6 to 280 g ae ha–1 (1/1,000 to 1/2 of 560 g ha–1 use rate) to indeterminate soybean at V3/V4 or R1/R2. For each criterion, injury was rated using a scale of 0=no injury, 1=slight, 2=slight to moderate, 3=moderate, 4=moderate to severe, and 5=severe. Greatest crop injury 15 d after treatment (DAT) was observed for dicamba rates of 0.6 to 4.4 g ha–1 for upper canopy pale leaf margins (3.8 to 4.2) at V3/V4 and for terminal leaf cupping (4.1 to 5.0) at R1/R2, and for rates of 0.6 to 8.8 g ha–1 for upper canopy leaf cupping (3.8 to 4.8) and upper canopy leaf surface crinkling (3.4 to 4.4) at V3/V4. Injury 15 DAT was equivalent to the nontreated control for dicamba rates as high as 4.4 g ha–1 for lower stem base swelling at V3/V4 and for upper canopy leaf rollover/inversion and terminal leaf necrosis at R1/R2; for rates as high as 8.8 g ha–1 for leaf petiole base swelling and stem epinasty at R1/R2, and lower stem base lesions/cracking (V3/V4 and R1/R2 average); and for rates as high as 17.5 g ha–1 for lower leaf soil contact at V3/V4 and leaf petiole droop at R1/R2. The response to increasing dicamba rate observed for the injury criteria was in contrast to the steady increase in visual injury and plant height reduction rated as 0 to 100%. The moderate to severe upper canopy leaf cupping, pale leaf margins, and leaf surface crinkling, and terminal leaf cupping 15 DAT with dicamba at 0.6 to 4.4 g ha–1 corresponded to soybean yield loss of 1% to 9% for application at V3/V4 and 2% to 17% at R1/R2.

Strawberry is an important horticultural crop in Florida. The long growing season and escapes from fumigation and PRE herbicides necessitate POST weed management to maximize harvest potential and efficiency. Alternatives to hand-weeding are desirable, but clopyralid is the only broadleaf herbicide registered for use. Weed control may be improved by early-season clopyralid applications, but at risk of high temperature and increased strawberry injury. The effect of temperature on clopyralid safety on strawberry is unknown. We undertook a growth chamber experiment using a completely randomized design to determine crop safety under various temperature conditions across acclimation, herbicide application, and post-application periods. There was no effect of clopyralid on the number of strawberry leaves across all temperatures. Damage to the strawberry manifested as leaf malformations. Acclimation temperatures affected clopyralid-associated injury (p=0.0309), with increased leaf malformations at higher temperatures (27 C) compared to lower (18 C) temperatures. Pre-treatment temperatures did not affect clopyralid injury. Post-application temperature also affected clopyralid injury (p=0.0161), with increased leaf malformations at higher temperatures compared to lower ones. Clopyralid application did not reduce flowering or biomass production in the growth chamber. If leaf malformations are to be avoided, consideration to growing conditions prior to application is advisable, especially if applying clopyralid early in the season.

A field study was established to evaluate symptoms, growth, yield, and nut quality of walnut trees subjected to multiple exposures of simulated bispyribac-sodium drift. Nut yield the year following simulated drift treatment was also evaluated because tissue differentiation for future fruiting position occurs in the prior season. Bispyribac-sodium was applied four times, at weekly intervals, at 0.5% and 3% of the use rate in rice (45 g ai ha-1). Injury from the 0.5% rate exceeded 5% after three applications. In general, the severity of the symptoms peaked 14 d after last application (23% and 40% injury for 0.5% and 3% rate, respectively) and subsequently remained nearly constant over the duration of the study. Growth of shoots treated with the 0.5% rate was initially delayed during the treatment regime but recovered after treatments ended; however, walnut shoots exposed to the higher rate had fewer internodes than nontreated trees at the end of the season. No measurable reduction in walnut yield or average nut weight either in the year of exposure or in the subsequent year was observed. However, both rates negatively affected walnut kernel color in the year of exposure.

Reforestation in the Inland Northwest, including northeastern Oregon, USA, is often limited by a dry climate and soil moisture availability during the summer months. Reduction of competing vegetative cover in forest plantations is a common method for retaining available soil moisture. Several spring and summer site preparation (applied prior to planting) herbicide treatments were evaluated to determine their efficacy in reducing competing cover, thus retaining soil moisture, on three sites in northeastern Oregon. Results varied by site, year, and season of application. In general, sulfometuron (0.14 kg ai ha–1 alone and in various mixtures), imazapyr (0.42 ae kg ha–1), and hexazinone (1.68 kg ai ha–1) resulted in 3 to 17% cover of forbs and grasses in the first-year when applied in spring. Sulfometuron+glyphosate (2.2 kg ha–1) consistently reduced grasses and forbs for the first year when applied in summer, but forbs recovered in the second year on two of three sites. Aminopyralid (0.12 kg ae ha–1)+sulfometuron applied in summer also led to comparable control of forb cover. In the second year after treatment, forb cover in treated plots was similar to levels in nontreated plots, and some species of forbs had increased relative to nontreated plots. Imazapyr (0.21 and 0.42 kg ha–1) at either rate, spring or summer 2007, or at lower rate (0.14 kg ha–1) with glyphosate in summer, provided the best control of shrubs, of which snowberry was the dominant species. Total vegetative cover was similar across all treatments seven and eight years after application, and differences in vegetation were related to site rather than treatment. In the first year after treatment, rates of soil moisture depletion in the 0- to 23-cm depth were correlated with vegetative cover, particularly late season soil moisture, suggesting increased water availability for tree seedling growth.

Herbicide resistance is ‘wicked’ in nature; therefore, results of the many educational efforts to encourage diversification of weed control practices in the United States have been mixed. It is clear that we do not sufficiently understand the totality of the grassroots obstacles, concerns, challenges, and specific solutions needed for varied crop production systems. Weed management issues and solutions vary with such variables as management styles, regions, cropping systems, and available or affordable technologies. Therefore, to help the weed science community better understand the needs and ideas of those directly dealing with herbicide resistance, seven half-day regional listening sessions were held across the United States between December 2016 and April 2017 with groups of diverse stakeholders on the issues and potential solutions for herbicide resistance management. The major goals of the sessions were to gain an understanding of stakeholders and their goals and concerns related to herbicide resistance management, to become familiar with regional differences, and to identify decision maker needs to address herbicide resistance. The messages shared by listening-session participants could be summarized by six themes: we need new herbicides; there is no need for more regulation; there is a need for more education, especially for others who were not present; diversity is hard; the agricultural economy makes it difficult to make changes; and we are aware of herbicide resistance but are managing it. The authors concluded that more work is needed to bring a community-wide, interdisciplinary approach to understanding the complexity of managing weeds within the context of the whole farm operation and for communicating the need to address herbicide resistance.

A 3-yr watermelon experiment was established in fall 2013 to evaluate cover crop, polyethylene mulch, tillage, and herbicide application components for weed control, yield, and profitability. Conservation tillage, either with a cereal rye cover crop alone or integrated with polyethylene mulch, was compared to the standard industry practice of conventional tillage with bedded polyethylene mulch. The study also used a non-bedded conventional tillage system without polyethylene to determine polyethylene and cover crop residue effects. Within each of the four systems, herbicide treatments comprised halosulfuron applied (1) at 26.3 g ai ha–1 PRE, (2) at 26.3 g ai ha–1 POST, or (3) sequentially at 26.3 g ai ha–1 PRE and POST. Each system also had a nontreated control. In addition, clethodim was applied in all plots twice POST at 140 g ai ha–1, except for nontreated in each system. In 2014, polyethylene or cereal rye cover crop effectively controlled tall morningglory, coffee senna, and carpetweed early season in nontreated plots, whereas the integration of the two was effective at controlling common purslane. Tall morningglory and purslane control was insufficient late season regardless of production system and herbicide application. In 2015, polyethylene effectively controlled cutleaf eveningprimrose, sicklepod, and arrowleaf sida early season in nontreated plots. Yellow nutsedge control was insufficient late season regardless of production system and herbicide application. Utilizing sequential halosulfuron applications did not increase weed control over PRE or POST alone in all years. Polyethylene use resulted in yields higher than systems without in all years. Across all 3 yr, net returns were highest for polyethylene mulch systems. The results of this experiment underscore the need for more progress in developing integrated conservation systems for watermelon production. Effective herbicides, low-disturbance cultivation, and/or hand weeding are most likely the key to success in conservation specialty crop systems.

Economically solvent fresh-market potato production is predominantly dependent on the ability to efficiently produce consistent tuber quality and high yield, and the ability to meet first-to-market demand with early-season potatoes. Unfortunately, these two qualifiers often work against each other in terms of production management. In response, we studied integrated potato vine management programs that support timely early-season potato harvest. Vine management with a flail chopper, roller, and flame burner used alone or followed by diquat was evaluated when initiated 21 or 14 d prior to harvest in 2015 and 2016. Potato varieties included ‘Yukon Gold’ and ‘Dark Red Norland’. Potato leaf and stem management, as well as tuber skinning, stolon separation, grade, and yield were quantified. Among mechanical methods, potato leaf and stem management were poor when vines were rolled or mowed but better when flail chopped. In general, vine management and tuber skin set was better when treatments were initiated 21 d prior to harvest as opposed to 14 d. Vine management, tuber skin set, and yield were comparable when potato vines were flail chopped followed by flame burning and where diquat was applied twice, offering a viable program for smaller scale or organic production.

Seven half-day regional listening sessions were held between December 2016 and April 2017 with groups of diverse stakeholders on the issues and potential solutions for herbicide-resistance management. The objective of the listening sessions was to connect with stakeholders and hear their challenges and recommendations for addressing herbicide resistance. The coordinating team hired Strategic Conservation Solutions, LLC, to facilitate all the sessions. They and the coordinating team used in-person meetings, teleconferences, and email to communicate and coordinate the activities leading up to each regional listening session. The agenda was the same across all sessions and included small-group discussions followed by reporting to the full group for discussion. The planning process was the same across all the sessions, although the selection of venue, time of day, and stakeholder participants differed to accommodate the differences among regions. The listening-session format required a great deal of work and flexibility on the part of the coordinating team and regional coordinators. Overall, the participant evaluations from the sessions were positive, with participants expressing appreciation that they were asked for their thoughts on the subject of herbicide resistance. This paper details the methods and processes used to conduct these regional listening sessions and provides an assessment of the strengths and limitations of those processes.

Weed control in vegetable production is especially challenging, because few registered herbicides simultaneously offer excellent crop tolerance and broad-spectrum weed control. We report here the response of several vegetables and weeds to 37.5 and 50 g ai ha−1 of the new herbicide bicyclopyrone (BCP). Vegetable crops showed good tolerance to BCP PRE and post-directed (POST-DIR) in high organic matter content muck soil. POST BCP severely injured all crops. Soil type and the rate of BCP PRE significantly affected response of vegetable crops, and variety of onion was significant. POST BCP controlled hairy galinsoga and small common purslane plants (>80% injury). Hairy galinsoga was not controlled by BCP PRE application in muck soil but was controlled in a 2:3 (vol/vol) blend of Wooster silt loam and a commercial potting mix. Common purslane was slightly injured in the muck soil and was well controlled in the soil and potting mix blend by PRE BCP. The herbicide did not control prostrate pigweed in either soil type or at any growth stage.

Stakeholders were surveyed across Nebraska to identify the problem weeds and assess common weed management practices. A total of 425 responses were returned across four Nebraska extension districts (Northeast, Panhandle, Southeast, and West Central). Collectively, 61.2% of total farmed or scouted areas in Nebraska were under no-till production, and corn and soybean were the major crops (82.3% of total farmed or scouted area). Common waterhemp, horseweed, and kochia were the most problematic weeds statewide. Widespread occurrence of glyphosate-resistant (GR) weeds such as common waterhemp, horseweed, kochia, and Palmer amaranth were a serious problem in GR crop production. Additionally, 60% of growers in Nebraska reported the presence of at least one GR weed species on their farms. The most commonly used preplant burndown herbicides were 2,4-D and glyphosate, followed by saflufenacil and dicamba. In Nebraska, 74% and 59% of corn and soybean growers, respectively, were using PRE herbicides; however, more than 80% of growers were using POST herbicides for in-crop weed management. Atrazine alone or in premix or tank mix with mesotrione, S-metolachlor, or acetochlor were the most widely applied PRE herbicides in corn and grain sorghum, whereas the most commonly used PRE herbicides in soybean were the inhibitors of acetolactate synthase (ALS) and protoporphyrinogen oxidase (PPO). Glyphosate was the most frequent choice of the survey respondents as a POST herbicide in GR corn and soybean; 2,4-D was the most commonly used POST herbicide in grain sorghum and wheat. In Nebraska, only 5.2% of total crop area was planted with glufosinate-resistant crops. Most of the respondents (89%) were aware of the new multiple herbicide–resistant crops, and 80% of them listed physical drift and volatility of the auxinic herbicides as their primary concern. Forty-eight percent of survey respondents identified herbicide-resistant weed management as their primary research and extension priority.