Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Lin, Rongfu
Guo, Weizhong
Chen, Xianbao
and
Li, Meng
2018.
Type synthesis of legged mobile landers with one passive limb using the singularity property.
Robotica,
Vol. 36,
Issue. 12,
p.
1836.
Lin, Rongfu
and
Guo, Weizhong
2019.
Type synthesis of legged mobile landers with multi-loop mechanisms.
p.
764.
Li, Jintao
Dong, Chenglin
Huang, Shunzhou
Zhao, Huihui
Shan, Xianlei
and
Liu, Haitao
2019.
Advances in Mechanism and Machine Science.
Vol. 73,
Issue. ,
p.
1751.
Laribi, Med Amine
and
Carbone, Giuseppe
2019.
Foreword to the Special Issue on the Computational Kinematics Conference, CK2017.
Robotica,
Vol. 37,
Issue. 7,
p.
1159.
Xu, Lingmin
Chai, Xinxue
Li, Qinchuan
Zhang, Liangan
and
Ye, Wei
2019.
Design and Experimental Investigation of a New 2R1T Overconstrained Parallel Kinematic Machine With Actuation Redundancy.
Journal of Mechanisms and Robotics,
Vol. 11,
Issue. 3,
Wang, Chensheng
Su, Fang
Zhao, Yanqin
Liu, Hongda
Guo, Yonghao
and
Niu, Wentie
2020.
A rapid performance evaluation approach for lower mobility hybrid robot based on gravity-center position.
Science Progress,
Vol. 103,
Issue. 2,
p.
003685042092713.
Xu, Yundou
Zhao, Yun
Yue, Yi
Xi, Fengfeng
Yao, Jiantao
and
Zhao, Yongsheng
2020.
Type synthesis of overconstrained 2R1T parallel mechanisms with the fewest kinematic joints based on the ultimate constraint wrenches.
Mechanism and Machine Theory,
Vol. 147,
Issue. ,
p.
103766.
Zhang, Chenyang
and
Jiang, Hongzhou
2021.
Rigid-Flexible Modal Analysis of the Hydraulic 6-DOF Parallel Mechanism.
Energies,
Vol. 14,
Issue. 6,
p.
1604.
Xu, Yundou
Yang, Fan
Xu, Zhenghe
Yao, Jiantao
Zhou, Yulin
and
Zhao, Yongsheng
2021.
TriRhino: A Five-Degrees-of-Freedom of Hybrid Serial–Parallel Manipulator With All Rotating Axes Being Continuous: Stiffness Analysis and Experiments.
Journal of Mechanisms and Robotics,
Vol. 13,
Issue. 2,
Ding, Jianzhong
and
Wang, Chunjie
2021.
Accuracy analysis and error compensation for Tricept machine tool under load.
Journal of Mechanical Science and Technology,
Vol. 35,
Issue. 8,
p.
3591.
Dong, Chenglin
Liu, Haitao
Xiao, Juliang
and
Huang, Tian
2021.
Dynamic modeling and design of a 5-DOF hybrid robot for machining.
Mechanism and Machine Theory,
Vol. 165,
Issue. ,
p.
104438.
Zhu, Bin
Wang, Liping
and
Wu, Jun
2022.
Optimal Design of Loading Device Based on a Redundantly Actuated Parallel Manipulator.
SSRN Electronic Journal ,
Zhang, Haiqiang
Tang, Jianglong
Yan, Changtao
Cui, Guohua
Zhang, Minghui
and
Yao, Yan'an
2022.
Stiffness analysis of a 3-DOF parallel mechanism for engineering special machining.
Mechanical Sciences,
Vol. 13,
Issue. 2,
p.
635.
Zhu, Bin
Wang, Liping
and
Wu, Jun
2022.
Optimal design of loading device based on a redundantly actuated parallel manipulator.
Mechanism and Machine Theory,
Vol. 178,
Issue. ,
p.
105084.
Liu, Haitao
Yan, Zhibiao
and
Xiao, Juliang
2022.
Pose error prediction and real-time compensation of a 5-DOF hybrid robot.
Mechanism and Machine Theory,
Vol. 170,
Issue. ,
p.
104737.
Xiao, Juliang
Liu, Sijiang
Liu, Haitao
Wang, Mingli
Li, Guangxi
and
Wang, Yunpeng
2022.
A jerk-limited heuristic feedrate scheduling method based on particle swarm optimization for a 5-DOF hybrid robot.
Robotics and Computer-Integrated Manufacturing,
Vol. 78,
Issue. ,
p.
102396.
Xu, Yundou
Yang, Fan
Mei, Youen
Zhang, Dongsheng
Zhou, Yulin
and
Zhao, Yongsheng
2022.
Kinematic, Workspace and Force Analysis of A Five-DOF Hybrid Manipulator R(2RPR)R/SP+RR.
Chinese Journal of Mechanical Engineering,
Vol. 35,
Issue. 1,
Fei, Jixiong
Lin, Bin
Huang, Tian
and
Xiao, Juliang
2022.
Thin floor milling using moving support.
The International Journal of Advanced Manufacturing Technology,
Vol. 120,
Issue. 1-2,
p.
1385.
Du, Xu
Wang, Bin
and
Zheng, Junqiang
2022.
Geometric Error Analysis of a 2UPR-RPU Over-Constrained Parallel Manipulator.
Machines,
Vol. 10,
Issue. 11,
p.
990.
Ye, Nijia
and
Hu, Bo
2022.
Kinematic and Stiffness Modeling of a Novel 3-DOF RPU+UPU+SPU Parallel Manipulator.
IEEE Access,
Vol. 10,
Issue. ,
p.
6304.