Polycyclic aromatic hydrocarbons (PAHs) are major air pollutants that are ubiquitously produced by the combustion of organic materials, and it is extremely important to identify their pollution sources. In this study, molecular fingerprinting and compound class-specific radiocarbon dating (CCSRA) were performed on PAHs from canal sediments and air samples collected in Kolkata, India’s third largest city (population approximately 16 million), where PAHs pollution has been a serious problem. Average PAH (Σ12-parent PAHs) concentrations in air samples were 65.1 ng m–3 in summer and 70.9 ng m–3 in winter and in canal sediments were 32.7 µg g–1, which are classified as “very high-level” pollution. Molecular fingerprinting using methyl-PAH/PAH (MPAHs/PAHs) ratios and isomer pair ratios with molecular weights of 178, 202, 228, and 276 suggested that wood and coal combustion were the dominant sources of PAHs in the sediment, and that atmospheric PAHs were influenced by oil combustion in addition to them. The fraction of contemporary carbon (ƒC) of sedimentary PAHs (0.056–0.100), together with the extremely low MPAHs/PAHs ratio results, lead to the conclusion that the major source of the high concentration of PAHs in the canals is from coal combustion. On the other hand, the ƒC of atmospheric PAHs (0.272–0.369) was close to the share of biomass fuels in India’s domestic fuel consumption in 2011 (about 35%). Furthermore, the observed ƒC-discrepancy between atmospheric and sedimentary PAHs in the same urban environment was interpreted to give an insight into the loading pathway of PAHs to canal sediments in Kolkata.

While recent genomic and isotopic information show that migration has been pervasive along human history, southern Andean archaeology has largely overlooked its importance in shaping human trajectories of sociocultural change. Building on previous isotopic research that identified the presence of migrant farmers in the Uspallata Valley (Mendoza, Argentina), we present chronological and bioarchaeological results that help to characterize the timing and mode of human migrations in the southern Andes. The burials with migrants show the representation of the different age classes, including a high abundance of children, as well as both men and women, suggesting that family groups were likely involved. The Bayesian modeling of 16 direct dates for migrants indicates that these migrations started between 1210–1275 CE (median 1255 CE) and finished at 1320–1425 CE (median 1360 CE), indicating that there is nearly no overlap between the commencement of this migration phase and the southwards expansion of the Inka Empire. The model defines a diachronic process that lasted between 55 and 195 years, implying that migration to Uspallata was a multi-generational process that involved between two and eight generations (median of four generations). Our contextual, bioarchaeological and chronological evidence indicates that the conditions fostering migration to Uspallata were sustained through time, inviting to explore persisting push-pull dynamics acting during this period. 87Sr/86Sr results show that migration occurred across the daily territories of these groups and may have involved movement across social or ethnic frontiers.

Pottery vessels played a central role in the processing, storage and transport of animal and plant products by prehistoric and historic peoples with their chemical residues surviving for thousands of years. Accurate radiocarbon dating of archaeological pottery vessels by isolating reliable sources of carbon relating to the use of pots has long been a major challenge, but is now possible using compound-specific radiocarbon analysis of absorbed organic residues preserved in the ceramic fabric of the vessel wall. This method involves the radiocarbon dating of single fatty acids most commonly derived from degraded animal fats. These compounds are extracted from the ceramic matrix and isolated from potentially interfering compounds using preparative capillary gas chromatography. When coupled with lipid biomarker and compound-specific stable carbon isotope analyses, this method enables the palaeodietary and chronological information contained in archaeological lipids preserved in ceramic vessels to be interpreted together. From a practical perspective the methodology is challenging and for successful application must adhere to rigorous protocols. We present here guidelines which include (i) consideration of pottery selection, (ii) technical parameters for the isolation of fatty acids then their 14C dating and calibration, and (iii) case studies selected to illustrate the best use of this method.

The absorption and distribution of radiocarbon-labeled urea at the ultratrace level were investigated with a 14C-AMS biotracer method. The radiopharmaceutical concentrations in the plasma, heart, liver, spleen, lung, kidney, stomach, brain, bladder, muscle, testis, and fat of rats after oral administration of 14C urea at ultratrace doses were determined by AMS, and the concentration-time curves in plasma and tissues and pharmacokinetic distribution data were obtained. This study provides an analytical method for the pharmacokinetic parameters and tissue distribution of exogenous urea in rats at ultratrace doses and explores the feasibility of evaluation and long-term tracking of ultratrace doses of drugs with AMS.

This paper compares various wood pretreatment methods for highly degraded, and problematic fossil wood extracted from the opencast Szczerców site of the Bełchatów Lignite Mine in Central Poland. The study evaluates the pretreatment methods using both large samples (55–255 g, referred to as series A) and small samples (36–150 mg, referred to as series B). Additionally, all preparation methods were applied to medium-sized samples (approximately 3 g, referred to as series C) with solvent washes in the Soxhlet apparatus. Radiocarbon dating was conducted using the LSC technique (subseries A1) and the AMS technique (subseries A2, series B, and C). The effectiveness and utility of each pretreatment protocol were compared based on 14C measurements and FTIR analysis. Through the conducted research and a multi-criteria analysis, the most effective method for preparing old fossil wood was identified. Our experience indicates that an extended, multistage preparation of highly degraded fossil wood samples, with a 14C concentration near the detection limit of the radiocarbon method, may result in a significant increase in 14C content.

Multiproxy sedimentary sequence analysis constitutes the basis for reconstructions of past paleoenvironments and climate evolution. These sequences are, for the most part, obtained by coring in lakes, maars or crater lakes whose waters can record volcanic activity or karstic contributions, especially in Eastern Anatolia and the Lesser Caucasus. The reservoir age effect in these geological contexts leads to an apparent aging of the radiocarbon ages which also affects the plants and animals developing in or near these waters and consequently the population consuming them. We present here some results obtained from modern samples taken from Mediterranean, central and eastern Anatolian lakes, from the Van and Sevan lakes and along the Kura River and its tributaries from the Lesser Caucasus. The effect of volcanic CO2 outgassing in the vicinity of maar crater lakes is also discussed.

The results of radiocarbon variation studies observed in annual tree rings from the NW Pacific (USA Northwest) (Stuiver and Braziunas 1993) and Europe (England, Brehm et al. 2021; Slovakia, Povinec 1977, 1987) are reviewed with the aim of better understanding the 11-year radiocarbon cycle and possible impacts of solar proton events on 14C levels in the atmosphere and biosphere. The average Δ14C amplitude in tree rings for the period of 1798–1944 was 1.3 ± 0.3‰, the average periodicity was 11 ± 1 years, and the average time shift between the sunspot numbers and Δ14C records was 3 ± 1 years. A new solar activity minimum (Gleissberg minimum, 1878–1933) has been identified in the Δ14C data sets from the NW Pacific and England, showing Δ14C excess of 7‰, comparable to the Dalton minimum (1797–1823). No significant changes in Δ14C levels were identified that could be associated with solar proton events during 1800–1950.

The AMS Golden Valley laboratory is equipped with two accelerator mass spectrometers: the AMS facility from the Budker Institute of Nuclear Physics (BINP) and the Mini Carbon Dating System (MICADAS-28) from Ionplus AG and two graphitization systems: the Automated Graphitization Equipment (AGE-3) from Ionplus AG and the Absorption-catalytic setup (ACS) developed at the Boreskov Institute of Catalysis (BIC). The ACS was designed for graphite preparation from labeled biomedical samples, dissolved organics, and dissolved or gaseous carbon dioxide but has proven to be suitable for the traditional dating of objects no older than 35,000 years. Here we present two series of AMS data for the samples from Glasgow International Radiocarbon Inter-comparison (GIRI), prepared using AGE-3 and ACS, and then measured on MICADAS-28. The mean value of the background F14C was 0.0024 ± 0.0009 and 0.012 ± 0.003 for AGE-3 and ACS, respectively, and both methods gave reproducible results for the OXI.

A low-cost and computer-controlled graphitization system connected to an elemental analyzer (EA) has been designed and built at the NTUAMS Lab. This semiautomatic system equips 6-unit reactors for the graphitization of CO2 with H2 on the iron catalyst. The entire procedure takes about 7 hours for iron conditioning, sample combustion and loading, and graphitization. The system can produce good-quality graphite for samples containing 0.5–1.6 mg carbon mass, with the pressure yield of graphitization ranging from 57.7% to 87.1%. The average values of OXI and OXII agree well with the consensus value, but the result of ANU sucrose was observed to be slightly higher than the reported one. The background samples of anthracite over ten months yielded an average of 0.38±0.10 pMC (n=21) corresponding to a 14C age of 45 kyr BP. Intercomparison samples L and M of FIRI exhibit that the measured 14C ages are almost identical to the consensus values and have a small spread in these values. The system has been carrying out graphitization for total organic carbon (TOC) of peat samples, and providing a more efficient and convenient way for AMS 14C dating.

Cathodes with recessed sample surfaces have several benefits in cesium sputter ion sources, including higher output, more efficient use of sample material, and improved focusing of the extracted ion beam. However, the Ionplus MICADAS uses cathodes with a graphite surface that is essentially flush with the sample holder. To evaluate the performance of recessed graphite with the MICADAS and determine the optimal surface depth, we tested four different depths, including the standard (flush) pressing method, 0.5 mm, 1.0 mm, and 1.5 mm. We found that recessed depths of 1.0 and 1.5 mm resulted in 20% higher ion beam current compared to the standard method under the same source conditions. The results are consistent with the beam produced from the recessed targets being more narrowly focused with a lower emittance, resulting in better transmission through the accelerator. Small graphite samples (200 µg C) with recessed surfaces produced higher currents for longer, leading to a 2–3× increase in sample ionization efficiency. Additionally, there was some evidence that isotopic ratio measurements of recessed samples were more stable over time. Overall, samples recessed to 1 mm depth offered numerous advantages over the standard pressing method and we have subsequently started pressing all MICADAS graphite using this approach.

Massive ground ice found in the Barrow Permafrost Tunnel at 3–7 m depths from the surface has been interpreted as an ice wedge and used to reconstruct early Holocene environmental changes. To better understand the development of this ground ice, we conducted radiocarbon dating for 34 samples of plant remains from the massive ground ice and underlying sediment layer. A significantly large gap in the measured radiocarbon ages (more than 24 ka) between massive ice and the underlying sediment layer throughout the tunnel profile suggested at least two possibilities. One is that the lower and older sediment layer had thrust upwards at the boundary between intruding ice wedge and adjacent sediment, and the growing ice had pushed the sediment sideways. Another is that erosional events had removed surface materials at about 12–36 ka BP (14–41 cal ka BP) before the overlaying sediment layer with massive ground ice developed. The overall distribution of radiocarbon ages from the massive ice supported the ice-wedge hypothesis as a formation mechanism, although our results showed several age inversions and large fluctuations. Dating of densely spaced samples revealed two ground-ice regions with similar ages around 11–11.5 and 10–10.5 ka BP divided by a relatively narrow region of transitional ages along the tunnel long-axis. This distribution may be explained by a possible misalignment between the sampling direction and the ice-wedge growth line or by intermittent ice growth with repeated cracking at more random locations than the classic ice-wedge growth model suggested.

Obtaining accurate radiocarbon (14C) results from wood samples requires the extraction of cellulose. In the past, this has been done using different combinations of methods including acidified bleaching, acid-base-acid, and strong bases. This often becomes a time-consuming task in most analyses, especially when single ring isotope chronologies are needed from wood samples. Using 14C and Fourier-transform infrared spectroscopy (FTIR), we tested four different pretreatment methods to determine their ability to produce high quality cellulose. We then adjusted the best methods to determine a method for pretreating wood laths of multiple rings. A sequence of base-acid-base-acid-bleach + strong base (BABAB+) and BABAB produced the most accurate results when compared to the Bomb20 Northern Hemisphere Zone 1 curve with an average difference in Δ14C of 1.3‰ and 5.8‰ respectively. These methods were adjusted to pretreat an entire wood lath and a comparison of the FTIR results suggest that our adjusted BABAB+ and BABAB produced high quality cellulose comparable to that of an individually pretreated ring. The possibility to pretreat wood lath samples has the potential to more than double the number of tree rings which can be pretreated in a week. This is a significant reduction in time when creating long tree ring chronologies.

Radiocarbon (14C) methodology was used to investigate the presence of biocarbon in different bio-based disposable packaging products. Packaging waste contributes to a municipal solid waste, which is increasing environmental concerns and resulting in the enhancement of EU regulations that aim to reduce packaging waste. The 14C amount in samples reflects how much of the biocarbon has been used. In this study, the concentration of 14C was determined in commonly used types of disposable packaging, such as cups, plates, straws, cutlery, and baking paper. Samples were made of materials such as paper, wheat bran, sugarcane, and wood. The mean concentration of the 14C isotope, measured by the accelerator mass spectrometry (AMS) technique, is greater than 100 pMC in all tested samples, indicating that the samples are modern. The relatively high 14C concentration values in the waterproof layer of the sample indicate that bioplastic, rather than plastic, was used in its production. The highest 14C isotope concentration values were measured for samples that used the oldest biomass (wood and paper), and the lowest for products from current crops (sugarcane and wheat bran), which is consistent with the trend of changes in 14C concentration in the biosphere. The study also addresses the problem of heterogeneity and representativeness of subsamples.

The floating dendrochronological sequence of pine wood from Józefowo, N. Poland was expected to cover the ∼660 BC radiocarbon (14C) excursion. The sequence was radiocarbon dated using the OxCal wiggle matching procedure and the IntCal20 calibration curve. 14C concentrations were measured in one-year α-cellulose samples from around 660 BC. The published data on the ∼660 BC 14C excursion from Grabie, Poland were used to absolute date the Józefowo chronology with 1-year accuracy. The results confirm the occurrence of a rapid increase in Δ14C in 664/663 BC and its potential to be used as a fixing point for floating dendrochronological sequences.

The AMS Golden Valley radiocarbon analysis laboratory is equipped with two accelerator mass spectrometers: AMS facility from Budker Institute of Nuclear Physics (BINP AMS) and MIni CArbon DAting System (MICADAS-28) from Ionplus AG and two graphitization systems: Automated Graphitization Equipment (AGE-3) from Ionplus AG and Absorption-catalytic setup developed in Boreskov Institute of Catalysis (ACS BIC). The laboratory provides routine 14C analyses of various samples: collagen, cellulose, humic acids, carbonates from sediments, etc. The main focus of the laboratory is to determine the age of archaeological artifacts by radiocarbon dating. This work presents a comprehensive description of the BINP AMS facility, with its operation compared with that of MICADAS in the same laboratory. In 2022, the AMS Golden Valley laboratory participated for the first time in the Glasgow International Radiocarbon Inter-comparison (GIRI). The samples were graphitized on the AGE-3 and subsequently measured in both AMS facilities. A comparison of the results of the two series of experiments, namely AGE-3 + MICADAS-28 and AGE-3 + BINP AMS, is given.

Since the first developments of anthropogenic lime materials radiocarbon (14C) dating in the 1960s, numerous studies have been undertaken and developed to investigate the topic further. Historic mortars are complex composite and open system materials that can incorporate a large range of components. Due to the complexity of the historic lime mortars composition, they are not part of a routine protocol in most radiocarbon laboratories and reliable dating is not always achieved. A thorough characterization needs to be performed and different preparation methods can be considered as a function of their compositions. A vast range of terms are employed to qualify the lime mortars components and alterations that can possibly have an influence on the dating result. Here, a detailed description of these components and the various terms used is listed. To illustrate this, images obtained by thin-section petrography and cathodoluminescence are presented in addition to radiocarbon results using stepwise acid hydrolysis on Belgian mortars having different provenance, state, age and composition. Depending on the type of aggregate used, the type of binder and its conservation state, the eventual presence of weathering carbonates and the assumed speed of the carbonation process, the reliability of radiocarbon measurements using the stepwise acid hydrolysis technique is discussed and confronted with presumed historical constraints.

At the Intertropical Convergence Zone (ITCZ), the northern and southern Tradewinds converge, and this region is characterized by low atmospheric pressure and high precipitation. The climate in the Timor Sea is characterized by seasonal precipitation changes driven by meridional migrations of the ITCZ and the monsoonal front. The ITCZ shifts in response to changes in the thermal balance between the northern and southern hemispheres. Thus, reconstruction of paleo-precipitation in the Timor Sea is expected to reveal past changes in both regional and global climate, the latter through inference of the ITCZ position. To reconstruct paleo-precipitation in the Timor Sea, we performed extensive radiocarbon analysis on both planktonic foraminifera and total organic carbon (TOC), which is derived from terrestrial and marine sources. Increased precipitation enhances the fraction of relatively old, terrestrial carbon to the core site, which in turn increases the difference between the ages of TOC and planktonic foraminifera. Variations in radiocarbon ages reveal that during northern hemisphere cooling intervals such as Heinrich Stadial 1 and the Younger Dryas, the ITCZ was in a southern position, thus increasing precipitation in the Timor Sea. However, the Timor Sea was dryer during the Bølling–Allerød warming as the ITCZ shifted northward.

The National Environmental Isotope Facility (NEIF) Radiocarbon Laboratory at the Scottish Universities Environmental Research Centre (SUERC) performs radiocarbon measurement of a wide range of sample matrices for applications in environmental research. Radiocarbon is applied to palaeoenvironmental, palaeoceanographic, and palaeoclimatic investigations, as well as work to understand the source, fate, turnover, and age of carbon in the modern carbon cycle. The NEIF Radiocarbon Laboratory supports users in the development and deployment of novel sampling techniques and laboratory approaches. Here, we give an overview of methods and procedures used by the laboratory to support the field collection, laboratory processing, and measurement of samples. This includes in-house development of novel and/or specialized methods and approaches, such as field collection of CO2 and CH4, hydropyrolysis, and ramped oxidation. The sample types covered include organic remains (e.g., plant material, peat, wood, charcoal, proteins), carbonates (e.g., speleothems, foraminifera, mollusc shell, travertine), waters (dissolved organic and inorganic carbon), gases (CO2 and CH4), soils and sediments (including sub-fractions).

Radiocarbon (F14C) and stable carbon (δ13C) values were measured in single grains of spring barley (Hordeum vulgare L.) from the sample archive from two adjacent sites of the Long-term Experiments (LTEs) Hoosfield Spring Barley at Rothamsted Research (Harpenden, Hertfordshire, UK), covering the growing periods (March to September) of 1852 to 2020. F14C data of the barley grain confirm that recent values are approaching and will decline below the “nominal” F14C value of 1, tracking a similar decrease reported in other studies. Importantly, the measured δ13C values reveal a different temporal decline over the pre-bomb and post-bomb timescale. Detailed statistical analysis of δ13C data along with δ13C analysis of independent, archived barley mash samples, verifies and quantifies the extent and rate of this decline. Evidence presented from the barley grain and barley mash samples suggests a clear breakpoint in δ13C data occurring in 1995, where the rate of change alters, in that the slope in δ13C data for the pre-1995 period is declining at 1.4‰ per century, and the slope in δ13C for the post-1995 period is declining at 3.6‰ per century. Such a consistent shift in δ13C data could be used with F14C values to extend the use of the bomb peak for forensic, ecological, and environmental applications.

Accurate radiocarbon (14C) analysis depends on a successful carbon separation relevant to the studied object. The process of 14C dating involves the following steps: characterization and sample choice, sample treatment, measurements, and evaluation of the results. Here, we provide an overview of conventional approaches to macromolecular samples and address specific issues such as detecting and removing contamination with roots, dolomite, and conservation products. We discuss the application of elemental analysis (%N, %C) in the preparation of bones and the infrared analysis in monitoring the contamination of samples. Our observations provide the basis for the discussions of the existing results and for planning the future sampling.