The My Naturewatch project uses self-build wildlife cameras supporting new public engagements with nature & technology. The project used Open Design methods providing self-defined, bespoke making outputs, modelling ‘environmental citizenship’, transitioning beyond sustainability. By co-designing makers were encouraged to engage with ecosystems refocusing human habitats & perspectives driven by curiosity. The article shares a qualitative evaluation of the project's impact on participants, describing attitudes, understanding and behaviour towards technology & nature changed by participation.

The main design activity in engineering practice is to adapt existing designs or to create variants of existing products to new demands, which require a robust model against both parametric and topological changes. To design such a kind of model becomes a big challenge, especially in the development of structural components due to the number of load application points, variable load cases and restrictions from manufacturing technologies. Thus, the generative parametric design approach is applied to generating high dynamic product models, allowing them to be adjusted for changes feasibly.

In current era of Anthropocene, human activities and their consequences on Earth ecosystems are under the lens of scientific research. Researchers in every field of study are trying to find alternatives to promote sustainable development. So it is for design, where researchers exploiting the problem-framing and problem-solving nature of the design discipline itself, trying to find new methodologies and tools to enhance sustainable development.

One of the most important tasks in the design for a sustainable production is focused on material selection. In this paper, authors will present a reflection upon material selection methods and an overview of existing material repositories. Traditionally, material selection is usually attributed to designers or technical professionals but nowadays information concurring in materials selection became a complex task to manage. Therefore, authors propose a case study concerning information management upon materials and their selection presented in a new possible approach: material selection as a collaborative task between several departments of an industrial company, to promote an aware information management activity upon materials.

As design and design thinking become increasingly important competencies for a modern workforce, the burden of assessing these fuzzy skills creates a scalability bottleneck. Toward addressing this need, this paper presents an exploratory study into a scalable computational approach for design thinking assessment. In this study, student responses to a variety of contextualized design questions – gathered both before and after participation in a design thinking training course – are analyzed. Specifically, a variety of text features are engineered, tested, and interpreted within a design thinking framework in order to identify specific markers of design thinking skill acquisition. Key findings of this work include identification of text features that may enable scalable measurement of (1) user-centric language and (2) design thinking concept acquisition. These results contribute toward the creation of computational tools to ease the burden of providing feedback about design thinking skills to a wide audience.

In powder bed fusion (PBF) additive manufacturing, the definition of part orientation is one of the most important steps as it affects the quality, the cost and the build time of products. Different works already attempted to propose methodologies for the assessment of optimal build orientation based on criteria such as the minimization of support volume. Elicitation works with industry experts have shown that they use much more varied rules to determine the orientation of parts. For instance, they do not treat the different surfaces of the part the same way (e.g., experts state that “priority surfaces of the part must be oriented close to vertical”). Today, the available tools do not allow integrating these kind of specifications. This paper discusses a knowledge-based methodology for the evaluation of part candidate orientations in PBF. Desirability function approach is used to translate companies’ expertise in the form action rules into mathematical functions that are tested on geometries to provide metrics for assisting the decision-making. A case study is presented to illustrate the use of this desirability function approach on complex part orientation problem.

In our modern, interconnected and globalized world, design is in motion, to adapt to new situations. But successful Design in Motion must be based on Processes in Motion. For a target-oriented adaptation of the processes to the new, challenging conditions, the as-is procedures must be captured and analysed. For this analysis, established capturing procedures from production or administration cannot be used due to some special features of design processes and workflows, which will be discussed in this contribution. To compensate for the weaknesses of existing methods, we propose an adapted method for holistic design process capturing. With the procedure, we want to enable an economic process analysis, which is crucial for small and medium-size companies in particular. To give an insight into the practical application of the method, we exemplarily analyse the process of a shaft construction and FEM-evaluation by two different employees. Based on this analysis and to verify the relevance of the presented approach, an evaluation with respect to the requirements is done.

The design of systems today often involves computer simulation to assess performance and design margins. Understanding how variability erases design margin is important to assure adequacy of margins, especially in optimization efforts. In this paper, we develop a toolchain using open source code libraries in Python, and encapsulate it in Jupyter notebooks, to provide an open source, interactive uncertainty quantification and sensitivity analysis toolchain. This works generally with simulation tools, where a reference folder is created containing a script that reads an input file of parameter values and runs the simulation. With that easily created, the toolchain executes the necessary uncertainty quantification steps with replicates of that reference folder. This approach fits within a broader workflow outlined that defines the variation modes to study, maps to simulation inputs, and screens the variables for sensitivity before conducting an uncertainty quantification. An example is shown in the simulation analysis of a Stirling engine.

This paper presents an interview study aiming to understand the state of the art of how ergonomics designers work in the vehicle development process within the Swedish automotive industry. Ten ergonomic designers from seven different companies participated in the interview study. Results report the ergonomics designers' objectives, workflow, tools, challenges, and ideal work performance tool. We identify four main gaps and research directions that can enhance the current challenges: human behavior predictions, simulation tool usability, ergonomics evaluations, and integration between systems.

The implementation of additive manufacturing enables the the re-thinking of a product towards function-oriented design. This study proposes a method, which uses a set of rules and indicators to implement functional integration, part consolidation, part separation and on-demand manufacturing onto a conventional prodcut architecture to restructure it into an AM-oriented product architecture. The feasibility of the method is demonstrated on an assembly from the field of high temperature applications.

This paper adapts the agile scrum sprint, typically used in software development, to a prototyping sprint for mechatronic product design. The Design by Prototyping framework describes how the prototyping sprint can be used to manage the prototyping process in design projects through an agile-stage-gate hybrid model. A comparison of 18 student projects using either prototyping sprints or a traditional iterative prototyping approach shows that prototyping sprints helped students make more deliberate, strategic decisions about their use of prototypes.

This paper reports a preliminary study (N=16) exploring vividness of visual mental imagery in product design ideation. Vividness was observed to vary across designers in the study, from high (68.8% of participants) to moderate (18.8%) to low (12.5%). A significant, strong positive relationship was found between vividness and creativity. Most participants reported using imagery always or sometimes, except one who has difficulties forming mental images. The results have several implications, including the possibility of other ‘ways of imagining’ not captured by visual reasoning models of design.

The status of Smart Home Appliances (SHAs) in the smart home industry has been raised as major components of a smart home. To design a good SHA, diverse stakeholders in the smart home ecosystem need to have a common understanding of smart homes and SHAs. However, the studies on what they are, especially those reflecting practitioners’ point of view, have been scarce.

In this research, we conducted systematic literature reviews and practitioner interviews using the concept mapping method to identify the attributes of SHAs depending both on academia and industry. In addition, we suggest a framework of the smart home ecosystem which describes how those attributes are revealed in the relationships among SHAs, users, and external stakeholders.

Since all of the interviewees are Korean SHA development professionals, the findings from this research could have been limited to the current status of the Korean SHA industry. Nonetheless, we expect that this research would contribute to building a consensus on what smart homes and SHAs are and provide the designers and developers of SHAs with systematic perspectives on smart homes.

The representation of the product use context is a well established design practice in Engineering Design. Recently, design theory is studying the product interaction involving several cognitive aspects such as the possible conditions in which a wrong interaction occurs. The aim of this paper is to find a quantitative evidence of the causes of these misuses. In particular, this study focuses on the detection of bad design and biases.

In this paper, we propose a method that helps to the automatic detection of bad design and biases from patents. The method is based on an approach that defines syntactic rules to detect sentences containing these artifacts. These rules are defined based on an exploratory analysis of the explicit mention of “bad design” and “bias” and then, tested with multiple experiments on a sample of patents. The results give a first quantitative evidence of the presence of bad design and biases in patents and consequently of their importance in the design theory. In particular, it is provided a fine grain analysis of the linguistic structure of sentences containing these artifacts helping designers in detecting automatically them from patents.

Advanced Driver Assistance Systems (ADAS) require a high level of interaction between the driver and the system, depending on driving context at a particular moment. Context-aware ADAS evaluation based on vehicle data is the most prominent way to assess the complexity of ADAS interactions. In this study, we conducted interviews with the ADAS development team at Volvo Cars to understand the role of vehicle data in the ADAS development and evaluation. The interviews’ analysis reveals strategies for improvement of current practices for vehicle data-driven ADAS evaluation.

Learning innovation and design process is a necessity of the coming decade and games are a potential tool to do so. This paper proposes an extended taxonomy for categorising innovation and design games. The intent is to understand the essential, the similar and the different categories not only for development, but also for evaluation of innovation and design games, and in turn, help educators identify appropriate games for their learning objectives and curricula.

Corporate climate action is critical in supporting the transition towards a low-carbon economy. This paper explores what design practices have been adopted by manufacturing companies that have committed to science-based emission reduction targets and are making progress towards those targets. We contribute to the existing literature by providing empirical evidence of circular economy (CE) actions related to product design supporting firms in reaching their emission reduction targets, contributing to the calls for more research showing evidence between CE adoption and emissions reduction.

Design Thinking has become increasingly popular across different disciplines. However, what it exactly entails is becoming more and more vague, leading to the term being used for many different approaches and applications. This paper presents an interview study with experts on the application and training of Design Thinking in academia and industry. We find a divide with some seeing Design Thinking as a mere toolbox of methods, while others see it as an umbrella term for the mindset that determines how designers think and act. Subjects unanimously attest the approach large potential to support certain types of businesses, when applied under the leadership of trained designers, but see a lot of danger for the approach to become meaningless if it keeps being advertised as an all-purpose problem-solving tool. The interviewees further share extensive experiences on specific success factors and pitfalls in applying Design Thinking in practice.

The contradictions of TRIZ are now widespread and recognized as an effective inventive design tool. They make it possible to find solution concepts to problems that cannot be solved by optimization approaches. However, many contradictions could be formulated and it could be difficult to choose the priority one. The authors propose here two methods to formulate the contradictions and identify the priority contradiction: an experimental approach on the one hand, and a multiphysics approach on the other hand. This analysis, illustrated through an example of 3D printing of parts, shows that these two approaches are similar in terms of result, and indeed make it possible to formulate contradictions taking into account all the complexity of a system.

Topology Optimization (TO) is an established method for the development of high strength and lightweight structural components. However, its results have to be geometrically revised to obtain a computational model that meets product development requirements. Design has to be in accordance with manufacturing constraints. Geometry reconstruction therefore still is a typically manual and tedious task, but increasingly supported by computational and automated approaches. In this paper, the inclusion of a casting constraint in an automated Medial Axis based reconstruction method is presented. Since the Medial Axis provides cross-section values by the computation of maximally inscribed spheres, this information is used for geometry reconstruction and even further for the purposeful adaption of the cross-section to match Heuver's circle method. Thereby, the directed solidification of molten material is considered. With a predefined feeder position, the demonstrator of a suspension control arm is used to show the application of the method. Resulting CAD-models are also structurally evaluated for their stiffness characteristics.

In addition to the known approaches for product development new or supplementary approaches have emerged. An important approach in this field is Systems Engineering (SE) and Model-Based Systems Engineering. Through these approaches, new procedures, level-focused description concepts and terms come into product development. However there are still some uncertainties as to how the known approaches of product development can be combined with the SE approaches. This paper aims to show how the known development approaches can be extended by and integrated with SE approaches.