Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-29T07:36:31.215Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis and Characterization of Siof Thin Films Deposited by Ecrcvd for Ulsi Multilevel Interconnections

Published online by Cambridge University Press:  15 February 2011

Seoghyeong Lee  and
Jong-Wan Park
Seoghyeong Lee
Affiliation:
Dept. of Metallurgical Engineering, Hanyang University, Seongdong-ku, Seoul 133-791, KOREA, jwpark@hyunp 1.hanyang.ac.kr
Jong-Wan Park
Affiliation:
Dept. of Metallurgical Engineering, Hanyang University, Seongdong-ku, Seoul 133-791, KOREA, jwpark@hyunp 1.hanyang.ac.kr
Get access

Abstract

Low dielectric constant fluorine doped silicon oxide films were deposited by using ECR plasma CVD with SiF4 and O2 as source gases diluted in Ar gas. Characterization of films was carried out in terms of various gas flow ratios (SiF4/O2 = 0.2 ∼ 1.6). The microwave power and substrate temperature during deposition were fixed at 700W and 300°C, respectively. The chemical bonding structure of the films was evaluated by Fourier transform infrared spectroscopy (FTIR), fluorine concentration by X-ray photoelectron spectroscopy (XPS) and refractive index by ellipsometry. Dielectric constant was determined from C-V measurements at 1MHz. FTIR spectra shows that as the fluorine concentration increases, peak intensities of Si-F bonding and shoulder peak at around 1160cm−1 of Si-O stretching mode increased. Moreover, with increasing the fluorine concentration in the SiOF film, the peak position of Si-O stretching mode shifts to the higher wavenumber side. The Si-F2 bond peak is observed to rise when the SiF4/O2 gas flow ratio is larger than 1.0. Refractive index and film density decreased with increasing the SiF4/O2 gas flow ratio. The SiOF film deposited at SiF4/O2 gas flow ratio of 1.0 exhibited fluorine content of 11.8 at.% and dielectric constant of 3.14.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 427: Symposium K – Advanced Metallization for Future ULSI , 1996 , 427
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Ravi Laxman, K., Semiconductor International 18(5), 71(1995)Google Scholar
2. Pramanik, D., Solid State Technol. 38(9), 69 (1995).Google Scholar
3. Usami, T., Shimokawa, K. and Yoshimaru, M., Jpn. J. Appl. Phys. 33, 408 (1994).Google Scholar
4. Usami, T., Shimokawa, K. and Yoshimaru, M., Ext. Abst. 25th Conference on SSDM, 161 (1993).Google Scholar
5. Kito, H., Muroyama, M., Sasaki, M., iwasawa, M., and Kimura, H., Ext. Abst. 27th Conference on SSDM, 160 (1995).Google Scholar
6. Homma, T. and Murao, Y., IEEE IEDM Tech. Digest, 289 (1991).Google Scholar
7. Homma, T., Yamaguchi, R., Murao, Y., and J. Electrochem. Soc. 140, 687 (1993).Google Scholar
8. Fukada, T. and Akahori, T., Ext. Abst. 25th Conference on SSDM, 158 (1993).Google Scholar
9. Lucovsky, G., Fitch, J.T., Tsu, D.V., and Kim, S.S., J. Vac. Sci. Technol. A7, 1136 (1989).Google Scholar
10. Fitch, J., Lucovsky, G., Kobeda, E., and Irene, E.A., J. Vac. Sci. Technol. B7, 153 (1989).Google Scholar
11. Pai, P.G., Chao, S.S., Takagi, Y., and Lucovsky, G., J. Vac. Sci. Technol. A4, 689 (1986).Google Scholar
12. Jenq -Shiuh Chou and Si -Chen Lee, J. Appl. Phys. 77, 1805 (1995).Google Scholar
13. Miyajima, H., Katsumata, R., Nakasaki, Y., and Okano, H., 1995 VMIC Conference, 391(1995).Google Scholar