Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-23T10:38:23.212Z Has data issue: false hasContentIssue false
  • English
  • Français

Rationalization of the plastic flow behavior of Polysynthetically-twinned (PST) TiAl crystals based on slip mode observation using AFM and Schmid's law

Published online by Cambridge University Press:  26 February 2011

Yali Chen  and
David P. Pope
Yali Chen
Affiliation:
Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, PA 19104–6272, U.S.A
David P. Pope
Affiliation:
Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, PA 19104–6272, U.S.A
Get access

Abstract

PST TiAl samples of different orientations were prepared and deformed by compression at room temperature. The deformation structures on the free surfaces were scanned using an AFM. It was found that when the angle between the lamellar interfaces and the loading axis is between 20 degree and 80 degree, PST samples deform primarily by shear in slip planes parallel to the lamellar interfaces. When the angle is below 20 degree, both the gamma phase and the alpha 2 phase deform by shear in slip planes inclined with the lamellar interfaces, but the shear vectors lie in the interface. When the angle is close to 90 degree, complex deformation behavior occurs. Shear in planes parallel to the lamellar interfaces contributes more to the overall strain in the directions perpendicular to the loading axis and the out-of-plane shear contributes to the strain in the compression direction. The characteristic U-shape curve of the yield stress versus the angle between the loading axis and the lamellar interfaces can be explained quite well using different C.R.S.S. for the three different deformation modes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 842: Symposium S – Integrative and Interdisciplinary Aspects of Intermetallics , 2004 , S6.5
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Inui, H., Nakamura, A., Oh, M. H. and Yamaguchi, M., Acta. Metall. Mater., 40 (11), 3095 (1992)Google Scholar
2. Umakoshi, Y., Nakano, T., Acta Metall. Mater., 41, 1155 (1993)Google Scholar
3. Kim, M., Nomura, M., Vitek, V. and Pope, D., in in High-Temperature-Ordered Intermetallic Alloys VIII, edited by George, E., Mills, M., Yamaguchi, M., (Mater. Res. Soc. Symp. Proc. 552, Boston, MA, 1998) pp KK3.1.1 Google Scholar
4. Kishida, K., Inui, H., Yamaguchi, M., Philos. Mag. A, 78 (1) 1 (1998)Google Scholar
5. Chen, Y., Pope, D., Microscopy Research and Techniques, submittedGoogle Scholar
6. Chen, Y., Pope, D., AFM study of the plastic deformation of Polysynthetically twinned (PST) TiAl crystals in hard orientations —— I: A orientation, Acta Mater., to be submittedGoogle Scholar
7. Chen, Y., Pope, D., AFM study of the plastic deformation of Polysynthetically twinned (PST) TiAl crystals in hard orientations —— II: N orientation, Acta Mater., to be submittedGoogle Scholar
8. Inui, H., Oh, M. H., Nakamura, A., Yamaguchi, M., Philos. Mag. A, 66 (4), 539 (1992)Google Scholar
9. Lu, L, Pope, DP, Mater. Sci. and Eng. A, 239–240, 126 (1997)Google Scholar