Hostname: page-component-848d4c4894-tn8tq Total loading time: 0 Render date: 2024-07-07T11:59:35.949Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of Amorphous Ti-Ni Films and Study on the Electrocatalytic Properties

Published online by Cambridge University Press:  21 February 2011

Hu Weikang ,
Zhang Yunshi ,
Song Deying  and
Zhou Zuoxiang
Hu Weikang
Affiliation:
Shea Panwen Chemistry Department, Nankai University, Tianjin 300071, China
Zhang Yunshi
Affiliation:
Shea Panwen Chemistry Department, Nankai University, Tianjin 300071, China
Song Deying
Affiliation:
Wang Genshi Institute of New Energy Material Chemistry, Nankai University, Tianjin 300071, China
Zhou Zuoxiang
Affiliation:
Wang Genshi Institute of New Energy Material Chemistry, Nankai University, Tianjin 300071, China
Get access

Abstract

The film electrodes of amorphous Tio.ssNi1.00 and Ti1.59Ni1.00 were prepared by means of ion beam sputtering method using TiNi and Ti3Ni alloy targets, respectively The surface microstructures and chemical states of elements of the two films before and after HF treatment were examined by SEM and XPS. The electrocatalytic properties for hydrogen evolution reaction were measured by the galvanost&tic steady-state method in 1M NaOH at 40°C. The results showed that the surface microstructures and compositions of the treated films obviously changed as compared with the untreated films. The electrocatalytic activities of the both films before treatment were lower, but the electrocatalytic activities and exchange current densities significantly increased after treatment.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 318: Symposium Ca – Interface Control of Electrical, Chemical, and Mechanical Properties , 1993 , 715
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Willems, J. J. G., Philips J. Res. Suppl., 39 (1). 1 (1984).Google Scholar
2 Schalpbach, L., J. Less-Comm. Met., 89, 37(1983).Google Scholar
3 Ishikawa, H., Oguro, K., Kato, A., Suzuki, H. and JsHii, E., J. Less-Conm. Met., 107, 105(1986)Google Scholar
4 Tetsuo, Sakai, Kiroshi, Ishikawa, Keisuke, Oguro, Chîaki Iwakura and Hiroshi Yonsyama, J. Electroehem. Soc, 134, 658(1987)Google Scholar
5 Grasselli, , Robert, K., Rlarris, , Jonathan, H. and Tenhover, , Michael, À., European patent, 0198599(1986)Google Scholar
6 Notten, P. H. L. and Hokkeling, P., J. Electrochem. Soc, 138,1877 (1991)Google Scholar
7 Zhang, Yunshi, Hu, Weikang, Wang, Da, Yuan, Huatang and Chen, Youxiao, Int. J. Hydrogen Energy, 18(6), 526(1993)Google Scholar