Carrier Illumination™ (CI) is an optical technique for non-destructive in-line monitoring of post-anneal junction depth and pre-anneal PAI depth and dose with wafer mapping capabilities. This work intends to extend the use of the CI-measurements from a range-specific quantitative measurement towards a more universal quantitative analysis of junction depth, profile abruptness and implant dose. For that purpose this paper presents a systematic study of the CI response to a wide variety of post anneal implant processes, varying parameters including implant species, dose and energy, annealing condition, and surface preparation.

Samples containing B, BF2 and As-implants with and without Ge PAI layers, with junction depths between 10-120 nm, were measured. In addition near-ideal box-like profiles (as obtained with CVD-growth) were fabricated and measured. For the abrupt CVD profiles, CI measures the junction position with sub-nm resolution independent of the CI-analysis conditions. For more graded profiles resulting from annealed implants, the correlation to the SIMS junction depth becomes a function of generation laser current (which is proportional to the applied power). As the concentration level, at which the correlation is made, can be adjusted over a concentration range of approximately 2x1018 to 2x1019/cm3 by changing the laser current, a route towards correlating the CI measurement with profile abruptness becomes feasible.