Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-29T07:51:11.024Z Has data issue: false hasContentIssue false

A High Index Contrast Silicon Oxynitride Materials Platform for Er-doped Microphotonic Amplifiers

Published online by Cambridge University Press:  15 March 2011

Sajan Saini
Affiliation:
Microphotonics Center, Dept. of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, U.S.A.
Jessica G. Sandland
Affiliation:
Microphotonics Center, Dept. of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, U.S.A.
Anat Eshed
Affiliation:
Microphotonics Center, Dept. of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, U.S.A.
Daniel K. Sparacin
Affiliation:
Microphotonics Center, Dept. of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, U.S.A.
Luca Dal Negro
Affiliation:
Microphotonics Center, Dept. of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, U.S.A.
Jurgen Michel
Affiliation:
Microphotonics Center, Dept. of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, U.S.A.
Lionel C. Kimerling
Affiliation:
Microphotonics Center, Dept. of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, U.S.A.
Get access

Abstract

Er-based optical amplification continues to be the ideal low noise, WDM crosstalk free, broadband candidate for waveguide amplifiers. Design analysis of the applicability of Er-Doped Waveguide Amplifiers (EDWAs) for micron-scale integrated photonics in a planar lightwave circuit concludes: (i) an >80× increase in gain efficiency, and (ii) a >40×increase in device shrink can be realized, for a high index contrast EDWA (with a core-cladding index difference of δn=0.1↔0.7), compared to a conventional Er-doped fiber amplifier. The materials challenge now is to establish a robust materials system which meets this high index difference design requirement while simultaneously leveraging the capability of silicon (Si) processing: a host platform for EDWAs must be found which can integrate with Si Microphotonics. Silicon nitride (Si3N4), silicon oxide (SiO2) and a miscible silicon oxynitride alloy (SiON) of the two meet this materials challenge. We present the results of reactive and conventional magnetron sputtering based materials characterization for this high index host system. Room temperature and 4 K photo-luminescence studies for annealed samples show the reduction of non-radiative de-excitation centers while maintaining an amorphous host structure. Atomic force microscopy shows less than 1 nm peak-to-peak roughness in deposited films. Prism coupler measurements show a reliable reproducibility of host index of refraction with waveguide scattering loss <2 dB/cm. We conclude that the SiON host system forms an optimal waveguide core for an SiO2-clad EDWA. Initial gain measurements show a gain coefficient of approximately 3.9 dB/cm.

Type
Research Article
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. ITRS (2001), International Technology Roadmap for Semiconductors: 2001, http://public.itrs.net/.Google Scholar
2. Wada, K., Luan, H.S., Lee, K.K., Akiyama, S., Michel, J., Kimerling, L.C., Popovic, M. and Haus, H.A., “Silicon and Silica Platform for On-chip Optical Interconnection”, Proc. LEOS Annual Meeting (2002).Google Scholar
3. Kimerling, L.C., Negro, L. Dal, Saini, S., Yi, Y., Ahn, D., Akiyama, S., Cannon, D., Liu, J., Sandland, J., Sparacin, D. and Watts, M., “Monolithic Silicon Microphotonics”, ch.3 in Silicon Photonics (Topics in Applied Physics, Vol.94), (Springer-Verlag, 2004).Google Scholar
4. Becker, P.C., Olsson, N.A. and Simpson, J.R., Erbium-Doped Fiber Amplifiers: Fundamentals and Technology (Academic Press, 1999).Google Scholar
5. Saini, S., Michel, J. and Kimerling, L.C., “Index Scaling for Optical Amplifiers”, IEEE Journal of Lightwave Technology, 21(10), 23682376 (2003).Google Scholar
6. Miniscalco, W.J., “Erbium-Doped Glasses for Fiber Amplifiers at 1500 nm”, invited paper, IEEE Journal of Lightwave Technology, 9(2), 234250 (1991).Google Scholar
7. Polman, A., Jacobson, D.C., Eaglesham, D.J., Kistler, R.C. and Poate, J.M., “Optical doping of waveguide materials by MeV Er implantation”, J. Appl. Phys., 70(7), 37783784 (1991).Google Scholar
8. Negro, L. Dal, Bettotti, P., Cazzanelli, M., Pacifici, D., Pavesi, L., “Applicability conditions and experimental analysis of the variable stripe length method for gain measurements”, Optics Communications, 229, 337348 (2004).Google Scholar