Hostname: page-component-7479d7b7d-t6hkb Total loading time: 0 Render date: 2024-07-08T17:06:50.102Z Has data issue: false hasContentIssue false
  • English
  • Français

Analysis of Adhesion and Interface Debonding in Laminated Safety Glass

Published online by Cambridge University Press:  10 February 2011

Y. Sha ,
C. Y. Hui ,
E. J. Kramer ,
P. D. Garrett  and
J. W. Knapczyk
Y. Sha
Affiliation:
Theoretical and Applied Mechanics, Cornell University, Ithaca, NY 14853 The Materials Science Center, Cornell University, Ithaca, NY 14853
C. Y. Hui
Affiliation:
Theoretical and Applied Mechanics, Cornell University, Ithaca, NY 14853 The Materials Science Center, Cornell University, Ithaca, NY 14853
E. J. Kramer
Affiliation:
Material Science and Engineering, Cornell University, Ithaca, NY 14853 The Materials Science Center, Cornell University, Ithaca, NY 14853
P. D. Garrett
Affiliation:
Monsanto Company, Springfield, MA 11051
J. W. Knapczyk
Affiliation:
Monsanto Company, Springfield, MA 11051
Get access

Abstract

A tension adhesion test is developed to measure the adhesion of a polymer interlayer to the glass plates in laminated glass. The polymer adhesive is bonded between two cracked glass plates and is loaded under a remote tension P. Typically, a peak load P* exists and its value depends on the adhesion between the polymer interlayer and the glass. The peak load P* is often used to characterize the adhesion strength of the interface. The experimental data is analyzed using a micromechanical model of debonding and simulated using finite element computation. Our analysis allow us to determine the shear and normal strength of the interface and the relation between the peak load and the mechanism of debonding.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 458: Symposium W – Interfacial Engineering for Optimized Properties , 1996 , 221
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Fariss, R.H.. Chemtech. p. 38, (September 1993)Google Scholar
[2] DDavid, J., in: Polymer-Solid Interfaces, Pireaux, J., Bertrand, P., and Bredas, J.L. (Eds.) p. 133, IOP, Bristol, UK (1992).Google Scholar
[3] Nichols, R.T. and Sowers, R.M., in: Encyclopedia of Chemical Technology. Fourth Edition, Kroschwitz, J.I. and Howe-Grant, M. (Eds), vol. 14, p. 1074, John Wiley, New York (1995).Google Scholar
[4] Needleman, A., J. Appl. Mech., 54, p. 525 (1987)Google Scholar
[5] Tvergaard, V., J. Mech. Phvs. Solid, 41, p. 1309 (1993)Google Scholar
[6] Dugdale, D. S., J. Mech. Phvs. Solid. 8, 100 (1960)Google Scholar
[7] Rice, J. R., Fracture, Liebowitz, (Ed), vol 2, p. 191, Academic Press, New York (1968)Google Scholar
[8] Abaqus User Manual. HKS Inc., Providence, RI.Google Scholar