Abstract: The SIMS channelplate used for recording image signals is characterized by local sensitivity differences caused by increasing aging of the central channelplate regions, which are subject to much more intense ion bombardment than the outer regions. These sensitivity differences lead to inhomogenous illumination of the sample, i.e., to images with disturbed intensity distributions. We present here a novel method to correct these illumination discrepancies by using the intensity changes due to sample position shifts to find the interfering background function that can be used to correct the original image. The proposed method has low presuppositions about the regarded images, and is stable with regard to noise and easy to apply. It is suitable not only for correction of channelplate local sensitivity differences but for all sorts of microscopic images that suffer from illumination inhomogeneity.

Abstract: In this work, we show how field emission–scanning electron microscopy (FE-SEM) can be a useful tool for the study of self-assembled monolayer systems. We have carried out a comparative study using FE-SEM and atomic force microscopy (AFM) to assess the morphology and coverage of self-assembled monolayers (SAM) on different substrates. The results show that FE-SEM images present the same qualitative information obtained by AFM images when the SAM is deposited on a smooth substrate (e.g., mica). Further experiments with rough substrates (e.g., Al grains on glass) show that FE-SEM is capable of unambiguously identifying SAMs on any type of substrate, whereas AFM has significant difficulties in identifying SAMs on rough surfaces.

Abstract: High-resolution transmission electron microscopy (HRTEM) images of the [1–10] zone of cubic SiC layers grown by molecular beam epitaxy (MBE) often reveal regions of material exhibiting an unusual threefold periodicity. The same contrast was found in earlier works of Jepps and Page, who attributed this contrast in HRTEM images of polycrystalline SiC to the 9R-SiC polytype. In this report we demonstrate by HRTEM image simulations that the model of the 9R polytype and an alternative twinning model can fit qualitatively the experimental HRTEM images. However, by comparing the fast Fourier transform (FFT) patterns of the experiments and the simulations, as well as by using dark-field imaging, we show unambiguously that only the model of overlapping twinned 3C-SiC crystals fully agrees with the experiments.

Abstract: Static and dynamic grain boundary potential barrier effects are directly observed at high spatial resolution for a varistor of model structure and chemistry. Grain boundary mechanisms for nonlinear electrical behavior are investigated for Nb-doped SrTiO3 bicrystals by in situ high-resolution electron holography under applied current coupled with electrical measurements. For the static case, holography reveals a positive grain boundary barrier of about 0.45 V, which is indicative of positive grain boundary charge adjoined by negative space charge regions. Under high applied current, in situ holography records the breakdown of this grain boundary barrier in accord with the macroscopic varistor effect, which is reflected in bulk I-V experiments.

Abstract: A set of uranium compound particles relevant to contaminated soils and other environmental concerns surrounding uranium bioavailability were studied by electron energy-loss spectroscopy (EELS). Core-loss EELS results suggest that uranium 4+ compounds have an energy loss resolvable from 6+ compounds. Shoulders on the uranium O4,5 edge further distinguish UO2 from UF4. Low-loss characteristics distinguish carbon-free uranium oxide specimens on holey substrates. In the presence of carbon, correction techniques must be applied. Uranium oxides, fluorides, and minerals show a tendency toward reduction of uranium toward 4+ under the beam. The electron dose required to achieve the transformation from 6+ to 4+ is more severe than that usually required to obtain satisfactory spectra, but the possibility for reduction should be considered. The conditions for low-loss analysis need not be as vigorous as those for core losses, and can be done without altering the valence of most oxides.

Abstract: Using standard square mesh grids as supports, we have prepared sol-gel membranes from a functionalized silane precursor, bis[3-(triethoxysilyl)propyl]tetrasulfide in various organic solvents. These mesh-supported membranes allow direct characterization of their microstructure and morphology by transmission electron microscopy (TEM). Homogeneous membranes without prominent microstructural features (or featureless) at nanometer scale were obtained from dimethyl formamide (DMF), isopropanol, and butanol solutions. However, highly porous membranes were produced from DMF and ethylene glycol binary system. Heterogeneous membranes filled with nanoparticles were formed from dimethyl sulfoxide solution. The featureless sol-gel membranes with tunable performances provide a useful alternative as supporting films for TEM applications.

When a new textbook on transmission electron microscopy is published and all of one's colleagues, established research scientists and graduate students alike, immediately go out and buy a copy–some even using their own money–then that is probably the best recommendation a book can ever get!