Hostname: page-component-5c6d5d7d68-txr5j Total loading time: 0 Render date: 2024-08-22T15:42:50.822Z Has data issue: false hasContentIssue false
  • English
  • Français

Structural Characterization of Powders and Thin Films of Layered Li1.2Mn0.55Ni0.15Co0.1O2 Cathode Materials

Published online by Cambridge University Press:  23 September 2015

Aaron C. Johnston-Peck ,
K. Kamala Bharathi ,
Saya Takeuchi ,
Igor Levin ,
Andrew A. Herzing  and
Leonid A. Bendersky
Aaron C. Johnston-Peck
Affiliation:
Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, MD, 20899, USA
K. Kamala Bharathi
Affiliation:
Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, MD, 20899, USA Department of Materials Science and Engineering, University of Maryland, College Park, Maryland, USA
Saya Takeuchi
Affiliation:
Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, MD, 20899, USA
Igor Levin
Affiliation:
Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, MD, 20899, USA
Andrew A. Herzing
Affiliation:
Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, MD, 20899, USA
Leonid A. Bendersky
Affiliation:
Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, MD, 20899, USA

Abstract

An abstract is not available for this content so a preview has been provided. As you have access to this content, a full PDF is available via the ‘Save PDF’ action button.
Image of the first page of this content. For PDF version, please use the ‘Save PDF’ preceeding this image.'
Type
Abstract
Information
Microscopy and Microanalysis , Volume 21 , Supplement S3: Proceedings of Microscopy & Microanalysis 2015 , August 2015 , pp. 145 - 146
Copyright
Copyright © Microscopy Society of America 2015 

References

[1] Certain commercial equipment and materials are identified in this paper in order to specify adequately the experimental procedure. In no case does such identification imply recommendations by the National Institute of Standards and Technology nor does it imply that the material or equipment identified is necessarily the best available for this purpose. The HE5050 powder and sintered pellet for PLD were kindly provided by B. Polzin and A. Jansen from Argonne National Lab.Google Scholar
[2] Bareno, J., et al., Chem. Mater 23 (2011). p. 2039.CrossRefGoogle Scholar
[3] Jarvis, K.A., et al., Chem. Mater 23 (201l (p. 3614.CrossRefGoogle Scholar