Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Mukhopadhyay, Goutam
and
Bhattacharyya, Sandip
2011.
An Investigation on the Cracking of Air Tubes of Rotary Kilns in a Sponge Iron Plant.
Journal of Failure Analysis and Prevention,
Vol. 11,
Issue. 6,
p.
636.
Kim, Bumjoon
Lee, Jonghoon
Im, Jiwoo
Kim, Jongbum
Kim, Moonki
Kim, Hakjoon
Song, Sungjin
and
Lim, Byeongsoo
2012.
Effect of sigma phase on near-threshold fatigue crack growth behavior and ultrasonic evaluation in AISI 316L stainless steel.
Journal of Mechanical Science and Technology,
Vol. 26,
Issue. 10,
p.
3091.
Hsieh, Chih-Chun
and
Wu, Weite
2012.
Overview of Intermetallic Sigma () Phase Precipitation in Stainless Steels.
ISRN Metallurgy,
Vol. 2012,
Issue. ,
p.
1.
Kim, Bum-joon
2013.
Small punch creep behavior and nondestructive evaluation of long term aged AISI 316L stainless steel.
International Journal of Precision Engineering and Manufacturing,
Vol. 14,
Issue. 7,
p.
1267.
Mukhopadhyay, Goutam
and
Bhattacharyya, Sandip
2013.
Cracking of an austenitic stainless steel lance pipe in a lime calcining plant.
Engineering Failure Analysis,
Vol. 34,
Issue. ,
p.
166.
Sahlaoui, Habib
and
Sidhom, Habib
2013.
Experimental Investigation and Analytical Prediction of σ-Phase Precipitation in AISI 316L Austenitic Stainless Steel.
Metallurgical and Materials Transactions A,
Vol. 44,
Issue. 7,
p.
3077.
Mukhopadhyay, Goutam
Sinha, Pankhuri
and
Bhattacharyya, Sandip
2013.
Failure analysis of hot sinter screens of a sinter plant.
Engineering Failure Analysis,
Vol. 35,
Issue. ,
p.
315.
Bentzel, G.W.
Ghidiu, M.
Griggs, J.
Lang, A.
and
Barsoum, M.W.
2016.
On the interactions of Ti2AlC, Ti3AlC2, Ti3SiC2 and Cr2AlC with pure sodium at 550 °C and 750 °C.
Corrosion Science,
Vol. 111,
Issue. ,
p.
568.
Choi, Yong
Baik, Youl
Moon, Byung-Moon
and
Sohn, Dong-Seong
2016.
Corrosion and Wear Properties of Cold Rolled 0.087% Gd Lean Duplex Stainless Steels for Neutron Absorbing Material.
Nuclear Engineering and Technology,
Vol. 48,
Issue. 1,
p.
164.
Aslam, Muhammad
Ahmad, Faiz
Yusoff, Puteri Sri Melor Binti Megat
Chai, Wen Lin
Ngeow, Wei Cheong
and
Nawi, Muhammad Khairul Amir
2016.
Investigation of Boron Addition on Densification and Cytotoxicity of Powder Injection Molded 316L Stainless Steel Dental Materials.
Arabian Journal for Science and Engineering,
Vol. 41,
Issue. 11,
p.
4669.
Kubík, Petr
Šebek, František
Petruška, Jindřich
Hůlka, Jiří
Park, Namsu
and
Huh, Hoon
2018.
Comparative investigation of ductile fracture with 316L austenitic stainless steel in small punch tests: Experiments and simulations.
Theoretical and Applied Fracture Mechanics,
Vol. 98,
Issue. ,
p.
186.
2018.
Metallography of Steels.
p.
551.
Lescur, A.
Stergar, E.
Lim, J.
Hertelé, S.
and
Petrov, R.H.
2021.
Microstructural investigation and identification of intermetallic σ-phase in solution annealed 316L-type austenitic stainless steel.
Materials Characterization,
Vol. 182,
Issue. ,
p.
111524.
Muhammad, Waqas
Batmaz, Rasim
Natarajan, Arunkumar
and
Martin, Etienne
2022.
Effect of binder jetting microstructure variability on low cycle fatigue behavior of 316L.
Materials Science and Engineering: A,
Vol. 839,
Issue. ,
p.
142820.
Schellert, Steven
Müller, Julian
Ohrndorf, Arne
Gorr, Bronslava
Butz, Benjamin
and
Christ, Hans-Jürgen
2022.
Characterization of the Isothermal and Thermomechanical Fatigue Behavior of a Duplex Steel Considering the Alloy Microstructure.
Metals,
Vol. 12,
Issue. 7,
p.
1161.
Krishna, S. Chenna
Venkateswaran, T.
Rao, Gundi Sudarsana
Manwatkar, Sushant K.
Muneshwar, Pravin
Govind, B.
Narayanan, P. Ramesh
and
Mohan, M.
2023.
Effect of a High Temperature Brazing Thermal Cycle on the Microstructure and Mechanical Properties of Fe–Cr–Mn–Ni–C Stainless Steel.
Metallography, Microstructure, and Analysis,
Vol. 12,
Issue. 3,
p.
476.
Zhai, Wengang
Aishwarya
Shandro, Robert
and
Zhou, Wei
2024.
Microstructure and mechanical properties of the wire arc additively manufactured 316L/ER70S-6 bimetal structure.
Virtual and Physical Prototyping,
Vol. 19,
Issue. 1,