The current paper describes the design of a fourth-order compact narrow-band hairpin-line bandpass filter centered at 2.5 GHz and enhanced stopband suppression ~38 dB required for wireless local area network (IEEE802.11b). The size reduction of 24% has been achieved for a conventional hairpin-line filter with a second-order inward folding of the open-end arms with an improvement in the skirt characteristics. However, the folding mechanism has been overshadowed by the presence of spurious harmonics with an attenuation level of <10 dB. Subsequently, L-shaped spurlines with optimum dimensions have been incorporated in the coupled arms of the folded hairpin-line cells. Three fourth-order filters have been designed with the incorporation of spurlines in different coupling regions, fabricated, and tested experimentally. Accordingly, an extended stopband with a rejection level of 38 dB up to 4.48f0 and a size reduction of 18% over the conventional hairpin-line filter has been achieved.

This article aims to provide readers with a physical understanding of the propagation channel that is complementary to mathematical channel modeling. It presents an analysis of the directional propagation channel based on radiophotos. Radiophotos are graphical objects where directions of arrival are superimposed on three-dimensional (3D) panoramic photographs. The interaction between electro magnetic waves and the environment is immediately identified with these representations. This paper focuses on the direction of arrival at mobile in an urban macrocell environment. The first radiophoto collection illustrates the major propagation phenomena such as reflection, diffraction, or street canyoning. The second collection illustrates typical propagation channel profiles that are classified according to delay, azimuth, and elevation spread values. The paper also describes an original panorama-based method for estimating noise level in the azimuth–elevation domain.

In this work, a new reconfigurable discrete 1D beam-steering Fabry–Perot cavity antenna with enhanced radiation performance is presented. It consists of a probe-fed patch antenna printed on the ground plane and a reconfigurable metasurface acting as the upper partially reflective surface to realize beam steering. By utilizing 6 × 6 proposed reconfigurable unit cells on the superstrate, the beam-steering angle can be effectively enhanced from ±7° to ±17° with fewer active elements and a much simpler biasing network. The proposed antenna was fabricated to validate the feasibility. Good agreement between the simulated and measured results is achieved. Moreover, the measured realized gains are over 11 dBi with a gain variation from the boresight direction to the tilted direction <0.2 dBi.

About 25 years have elapsed since the first measurement by a FW-CW (called fast sweeping) reflectometer of the electronic density in magnetized fusion plasma. Substituting tube sources with solid-state components has resulted in a decrease of the sweeping time from the millisecond to the microsecond range. Based on voltage control oscillators and on active frequency multipliers, four profile reflectometers covering the range 33–155 GHz are in operation on Tore-Supra tokamak. Their originality is the use of one source for the launched and reference signal, although the detection is heterodyne. Indeed, a single side band modulator shifts the launched frequency ahead of frequency multipliers. With a sweeping time comparable to the plasma turbulence characteristic time the density profile is frozen. The density profile is then reliably measured with high radial and temporal resolution.

A polarization and band reconfigurable cross-slot antenna for multiband applications is presented in this paper. The antenna consists of four p–i–n diodes embedded in the cross-shaped slot in a ground plane and excited by a microstrip feed line. The p–i–n diodes are placed in such a way that they produce multiple bands, with linearly and circularly polarized (CP) radiation. By switching the states of the p–i–n diodes, the sense of rotation of the electric field in CP radiation can be reconfigured. The proposed structure can be configured to produce two bands that radiate linearly polarized waves or three bands, where, two are linearly polarized and one is CP. The proposed design concepts are validated bythe CST studio suite as well as measurementsare carried out on fabricated prototypes.

This paper presents a fully digital transmitter chain from baseband to antenna, including a modulator, two truly digital (i.e. fully switched) microwave power amplifiers and a transmit/receive switch. Both, amplifier and switch monolithic microwave integrated circuits were implemented in a GaN HEMT process. The novel amplifier design provides greatly reduced complexity, needing only three voltage sources. Measurements were conducted using 5, 20, and 100 MHz wide baseband signals. Carrier frequencies cover the 900 and 2000 MHz bands. For the 5 MHz BB signal an ACLR of over 52 dB is reached, fulfilling the 3GPP specs for base station use while still maintaining a final-stage drain efficiency of 46% at 6.5 dB peak to average power ratio. Full-scale output power at 30 V supply voltage was measured to exceed 3 W at 80% drain efficiency. Further features of this digital amplifier approach include small form factor and frequency agility, making it an ideal candidate for software defined radio.

A miniaturized and flexible frequency-selective surface (FSS) has been presented in this article with a unit cell size of 0.049 λc × 0.049 λc where λc is the free space wavelength at the lower cut-off frequency. In order to achieve an ultra-wide (−3 dB) second order pass band of 151.3% with enhanced selectivity factor of 0.887, a cascaded triple layered hybrid resonating structure has been proposed with symmetrical Minkowski island-shaped fractal geometry pair and spiral-shaped middle layer in optimized air gap coupling. Furthermore, 149.8% ultra-wide pass band also ascertains the conformal feature of the proposed structure. In addition to this, the proposed FSS provides the stable angular response for both TE and TM polarization. An equivalent circuit model has been synthesized for accurate frequency response. Finally, a sample prototype has been fabricated to verify the experimental validation. Excellent angular stability under large oblique incident and significant conformal characteristics ensure the compatibility of the proposed structure for electromagnetic stealth in 0.9–1.8 GHz GSM band, 2.10–2.14 GHz wireless medical telemetry band, 2.4–2.5 and 4.9–5.8 GHz WLAN band, 3.4–3.7 and 4.4–4.9 GHz sub-6 GHz 5 G band, and 3.7–4.2 GHz C band.

In this paper, the concept of perturbation theory is applied to derive a general electric field (E-field) expression for any arbitrary-shaped microstrip patch antenna. The arbitrary shape is created by adding small perturbation in a regular patch shape, which is used to find perturbed and unperturbed electromagnetic wave solutions for resultant E-field of patch antenna. Ansoft HFSS simulator is used to validate the derived field expression in curvilinear coordinates for a regular circular-shaped patch. Then the proposed field analysis is applied to develop two new arbitrary-shaped patches in C-band for desired E-field patterns.

Sub-beam concept is very useful for size reduction of multiple beam phased array antenna (PAA) systems that are applied for high-throughput communication satellites. In this paper, the synthesis procedure for a PAA with multiple sub-beams in two dimensions of the coverage domain is proposed and analyzed. In the design procedure, the interleaved sub-arraying technique has been applied to eliminate the grating lobes. The extremely short angular distance between adjacent sub-beams is challenging. An innovative beam forming network is proposed, which can generate multiple orthogonal sub-beams while keeping the required angular distance between sub-beams. To demonstrate the effectiveness of the design technique, an example considering the requirements derived from conceptual design of a high-throughput communication payload is presented. The array is optimized using the genetic algorithm while taking into account the technical requirements of the antenna. The gain patterns exhibit a 0.4° angular distance between adjacent sub-beams. In addition, the number of sub-arrays and element spacing guarantee the orthogonality of the sub-beams. The calculated carrier to interference ratio in the synthesized array shows that it has acceptable values in each spot. The aperture size reduction in the synthesized array compared to a conventional multiple beam array is more than 36.7%.

An envelope tracking (ET) radio frequency (RF) power amplifier (PA) is described intended for handsets and applications where a large number of PAs are needed. Instead of the usual split frequency architecture, a linear tracking charge pump structure is proposed. This allows the supply voltage of an RF PA to increase during the peaks of a high peak-to-average power ratio signal. When combined with an LDMOS RF PA, 42.9% efficiency was achieved at 31.3 dBm output power (POUT) when amplifying a 5 MHz bandwidth 8 dB PAPR 3rd Generation Partnership Project (3GPP) long term evolution signal. The first channel adjacent power ratio (ACPR) without digital pre-distortion was −30.4 dBc, meeting the 3GPP handset emission mask. The ACPR could be improved to −32.5 dBc by adopting a curved envelope shaping function at a reduced efficiency of 38.9%.

A mathematical model of variable inclination continuous transverse stub (VICTS) antenna for low sidelobe design is proposed in this paper. VICTS antenna is an antenna with continuous transverse stubs on the parallel-plate waveguide and additional branches attached to the transverse stubs to generate radiation. The antenna using this technique has high aperture efficiency and keeps a significant solution for high-gain antenna. However, the sidelobe level (SLL) of this antenna is relatively high and increases continuously as the pitch angle decreases. This paper presents a fast calculation model for the SLL of VICTS antennas using leaky-wave theory and antenna array theory. The full-wave simulation results and model calculation results are in good agreement, so this model can be used for SLL suppression of VICTS antennas in different frequency bands. By controlling the aperture field distribution to be tapered, the SLL is suppressed to − 23.7 dB using this mathematical model.

This contribution presents miniaturization techniques for folded circular substrate integrated waveguide (FCSIW) cavity filters. The cavities support dual-mode operation. Two of these cavities are combined to form a fourth-order filter. Two filter designs are implemented. The first one serves as a reference and exhibits good manufacturability. For the second one, the cavity is modified, which leads to $50\%$ more compactness. The designs are experimentally verified with 10 GHz bandpass filters. Even though the achieved level of compactness requires higher technological effort, the measurements validate the miniaturization concept. The out-of-band rejection exceeds 40 dB between 11.2 and 30 GHz for the reference filter and between 11.3 and 33 GHz for the miniaturized one. The implemented components are compared with state-of-the-art filters.

An L-band frequency and rejection-level tunable SiGe HBT differential amplifier with dual stopband is presented. To achieve frequency and rejection-level tunable performance, dual LCR-tank circuit with an active load is incorporated into the design of the series feedback loops of the differential amplifier. The active load consists of a varactor diode represented as a variable C and a common-emitter transistor represented as a variable R. The frequency and rejection level can be tuned independently by controlling a cathode bias voltage of the varactor diode or a base bias voltage of the transistor. The implemented 0.35 μm SiGe HBT amplifier with dual stopband demonstrates a frequency tuning of 0.53–1.16 GHz and a rejection-level variation up to 9.5 dB. The input and output return losses are better than 17.5 and 11 dB over 0.2–1.5 GHz, respectively. The measured P1dB is+3 dBm and IIP3 is 0 dBm with Vcc = 6 V and Ic = 8 mA.

This work represents a circularly polarized implantable patch antenna operating at the ISM band (2.4–2.48 GHz) for biomedical applications. The presented patch antenna has a compact volume of 50 mm3 i.e., 10 × 10 × 0.5 mm3. All the Simulations have been carried out within homogeneous skin phantom and head scalp phantom. Miniaturization of antenna and enhancement of bandwidth is achieved by using various techniques described in this work. The designed patch antenna has wide axial ratio bandwidth of 20.08 and 15.44% inside scalp phantom and homogeneous skin phantom, respectively. Obtained impedance bandwidths are 56.79 and 49.75% inside scalp phantom and homogeneous skin phantom, respectively. At 2.45 GHz, obtained peak gains are −25.18 and −28.12 dB, respectively. The proposed antenna is enclosed in a biocompatible material to avoid direct contact with the human tissue. For patient safety concerns, simulated maximum specific absorption ratio values are also investigated and are under the limits of the IEEE standard. The allowable input power is also calculated in this work. Link budget analysis is used in this work to determine the far-field communication range of the designed antenna.

A two-port ceramic-based antenna loaded with partially reflecting surface (PRS) is structured and explored. Fan-shaped slot is utilized to create circularly polarized wave in both frequency ranges. Dual frequency ranges are due to hybrid mode creation inside the ceramic material, i.e. HEM11δ and HEM12δ modes. PRS is used to change the phase gradient, which in turn tilts the radiation beam (±35°) obtained from different port in opposite direction. This concept is useful to reduce the envelop correlation coefficient using far-field. Experimental verification confirms that the designed antenna works from 26.1 to 27.5 GHz and 31.7 to 33.6 GHz along with less than 3-dB axial ratio from 26.5 to 27.1 GHz and 31.9 to 33.1 GHz respectively. Orthogonal placement of ports introduces the concept of polarization diversity and decreases the coupling between ports by an amount of −25 dB. Good gain value (up to 7.0 dBi) and better value of diversity performance make the designed radiator applicable for 5 G millimeter-wave uses.

The ability of food products to store and dissipate electromagnetic energy is determined by the material's dielectric properties. In relation to this phenomenon, a non-destructive technique is presented for food evaluation based on the shift in resonant frequency and reflection coefficient magnitude value of the proposed slot-loaded microstrip line-fed antenna-based sensor caused by the change in dielectric properties of the food material. In this work, a miniaturized antenna sensor of 10 × 10 mm2 size comprised of a dielectric substrate FR-4 with permittivity (εr) = 4.4 having ground plane at the bottom and a radiating element at the top is designed to operate at 13.3 GHz. Three samples of spices, i.e. red chilli powder, black pepper powder, and turmeric powder, are considered for quality monitoring whose relationship in terms of reflection coefficient, resonant frequency, and dielectric permittivity at 13.17, 12.61, and 13.09 GHz respectively is analyzed. Further, second-order polynomial model is derived to predict dielectric permittivity of the material under test with high accuracy. The experimental procedure of this proposed sensor is based upon the interaction of the sample food materials with the electromagnetic field owing to shift in resonant frequency as a function of dielectric permittivity of the samples. The proposed antenna sensor has a Q-factor of 409, showing significantly high sensitivity of 280 MHz with 98% accuracy and standard deviation less than the difference between unadulterated and adulterated values, giving resolution high enough to distinguish adulteration with an acceptable statistical accuracy.

A 6–18 GHz high-power amplifier (HPA) design in GaN on SiC technology is presented. This power amplifier consists of a two-stage corporate amplifier with two and four transistors, respectively. It has been fabricated on UMS using their 0.25 µm gate length process, GH25. A study of the suitable attachment method and measurement on wafer and on jig are detailed. This HPA exhibits an averaged output power of 39.2 dBm with a mean gain of 11 dB in saturation and a 24.5% maximum power added efficiency in pulse mode operation with a duty cycle of 10% with a 25 µs pulse width.

In this study, a novel, cost-effective miniaturized tag antenna was developed for applications on the human body. To achieve impedance matching with the complex conjugate impedance of the Monza-4 tag chip (7.17–j74.22 Ω at 915 MHz), the proposed structure was configured by coarsely tuning the positions of vias and fine-tuning the small gaps of its coupled patches. For further reducing the profile and dimensions of the antenna, a design technique based on the three-dimensional dipole antenna current distribution was used. The proposed antenna configuration was not only miniaturized but also achieved a long stable reading distance (>5.0 m) and a wide impedance bandwidth of 71 MHz or 7.65% (covering the ultrahigh frequency radio frequency identification ranges in most regions), regardless of the location of the tag on the human body. Experiments were conducted to validate the simulated results, and adequate agreement was found between the simulated results and the measured results.

A growing interest in dielectric waveguides (DWGs) as an alternative to commonly used waveguides (like coaxial or twisted-pair cables) for high data rate interconnects could be observed in the last few years. Especially in the mm-wave frequency range (30–300 GHz) applications with these waveguides benefit from low losses and low dispersion. Moreover, using both polarizations of the fundamental mode in such waveguides could theoretically double the data rate without the need of higher bandwidth or additional fibers. The connection between DWGs and commonly available transceiver chips requires broadband transitions from planar waveguides like microstrip lines to DWGs. In this paper, an overview of the current developments of such transitions is given and a novel low-complexity design is presented that reduces the space consumption by 35% related to recently published works. This allows an easy integration into a printed circuit board layout or a chip package. Furthermore, an extensive sensitivity analysis is presented to prove the robustness toward manufacturing tolerances. The transition is realized at W-band frequencies (75–110 GHz) and achieves a relative 10 dB-bandwidth of more than 25% with a minimum insertion loss of 1.2 dB. It is shown that these properties even hold for manufacturing tolerances of nowadays manufacturing processes.

This paper presents the parameter estimation of the fractal antenna array with the virtual instrument model designed in laboratory virtual instrument engineering workbench software. In this work resonant frequency, gain and voltage standing wave ratio have been used as an output parameter with the change in three input parameters such as radius of a circular patch, height of substrate, and dielectric constant of the material. Measured output parameters have been compared with neural network outputs and error has been represented in a graphical way for each output parameter of the antenna array. Along with output parameter estimation, a designing parameter such as radius of the circular patch has also been estimated with virtual instrument model and absolute error for radius has been shown in the display window of the designed model. The proposed antenna array has been fabricated and simulated results have been validated with measured results.