We study the radial-hedgehog solution in a three-dimensional spherical droplet, with homeotropic boundary conditions, within the Landau–de Gennes theory for nematic liquid crystals. The radial-hedgehog solution is a candidate for a global Landau–de Gennes minimiser in this model framework and is also a prototype configuration for studying isolated point defects in condensed matter physics. The static properties of the radial-hedgehog solution are governed by a non-linear singular ordinary differential equation. We study the analogies between Ginzburg–Landau vortices and the radial-hedgehog solution and demonstrate a Ginzburg–Landau limit for the Landau–de Gennes theory. We prove that the radial-hedgehog solution is not the global Landau–de Gennes minimiser for droplets of finite radius and sufficiently low temperatures and prove the stability of the radial-hedgehog solution in other parameter regimes. These results contain quantitative information about the effect of geometry and temperature on the properties of the radial-hedgehog solution and the associated biaxial instabilities.

We analyse some fundamental problems of linear elasticity in one-dimensional (1D) continua where the material points of the medium interact in a self-similar manner. This continuum with ‘self-similar’ elastic properties is obtained as the continuum limit of a linear chain with self-similar harmonic interactions (harmonic springs) which was introduced in [19] and (Michelitsch T.M. (2011) The self-similar field and its application to a diffusion problem. J. Phys. A Math. Theor.44, 465206). We deduce a continuous field approach where the self-similar elasticity is reflected by self-similar Laplacian-generating equations of motion which are spatially non-local convolutions with power-function kernels (fractional integrals). We obtain closed-form expressions for the static displacement Green's function due to a unit δ-force. In the dynamic framework we derive the solution of the Cauchy problem and the retarded Green's function. We deduce the distributions of a self-similar variant of diffusion problem with Lévi-stable distributions as solutions with infinite mean fluctuations. In both dynamic cases we obtain a hierarchy of solutions for the self-similar Poisson's equation, which we call ‘self-similar potentials’. These non-local singular potentials are in a sense self-similar analogues to Newtonian potentials and to the 1D Dirac's δ-function. The approach can be a point of departure for a theory of self-similar elasticity in 2D and 3D and for other field theories (e.g. in electrodynamics) of systems with scale invariant interactions.

The aim of this work is to present a technique for the optimisation of emergency vehicles travel times on assigned paths when critical situations, such as car accidents, occur. Using a fluid-dynamic model for the description of car density evolution, the attention is focused on a decentralised approach reducing to simple junctions with two incoming roads and two outgoing ones (junctions of 2 × 2 type). We assume the redirection of cars at junctions is possible and choose a cost functional that describes the asymptotic average velocity of emergency vehicles. Fixing an incoming road and an outgoing road for the emergency vehicle, we determine the local distribution coefficients that maximise such functional at a single junction. Then we use the local optimal coefficients at each node of the network. The overall traffic evolution is studied via simulations, both for simple junctions or cascade networks, evaluating global performances when optimal parameters on the network are used.

This paper provides an algorithm for identifying the multipoles of a meromorphic function from the boundary measurements, which can be applied to inverse source problems for a Poisson equation to reconstruct its source such as linear combination of mono and dipolar point sources. After establishing an algorithm that allows to identify the number, the locations and the moments of poles, we provide a stability estimate of the algorithm under the measurement error.

In this paper, we review a number of uses of conformal mapping techniques for obtaining director profiles of liquid crystals in confined and semi-confined geometries. In particular, we will consider geometries which allow more than one stable state, some of which are of use in bistable displays. These solutions also allow the investigation of the energy of stable states and enable conclusions to be reached as to how such geometries may be optimised for bistable display applications. Such techniques are also able to provide initial configurations for the solution of more complicated situations where numerical methods are used to investigate switching characteristics.

Although in recent years bone piezoelectricity has been normally neglected, lately a new interest has appeared to show the importance of bone piezoelectricity in wet bone's complex response to loading. Here we numerically study a problem, including a strain-adaptive bone remodelling and the piezoelectricity. Its variational formulation leads to a coupled system composed of two linear variational equations for displacements and electric potential, and a parabolic variational inequality for the apparent density. Fully discrete approximations are now introduced by using the finite element method to approximate spatial variable and the explicit Euler scheme to discretise time derivatives. Some a priori error estimates are proved and the linear convergence of the algorithm is deduced under additional regularity conditions. Finally, some one- and two-dimensional numerical simulations are described to show the accuracy of the proposed algorithm and the behaviour of the solution.

The main result of this paper is the proof of uniqueness of non-negative entropy solutions of the thin film equation ht + (|h|nhxxx)x = 0 for < n < 4. The uniqueness proved under assumptions that the initial data satisfy a finite β-entropy condition for some negative enough exponent β and that the solution is locally monotone at the touchdown point. The new dissipated functional recently constructed by Laugesen (Commun. Pure Appl. Anal., 4(3):613–634, 2005) is used to prove an auxiliary energy equality, and then Grönwall's lemma leads to uniqueness.

Above the spinodal temperature for micro-phase separation in block co-polymers, asymmetric mixtures can exhibit random heterogeneous structure. This behaviour is similar to the sub-critical regime of many pattern-forming models. In particular, there is a rich set of localised patterns and associated dynamics. This paper clarifies the nature of the bifurcation diagram of localised solutions in a density functional model of A−B diblock mixtures. The existence of saddle-node bifurcations is described, which explains both the threshold for heterogeneous disordered behaviour as well the onset of pattern propagation. A procedure to generate more complex equilibria by attaching individual structures leads to an interwoven set of solution curves. This results in a global description of the bifurcation diagram from which dynamics, in particular self-replication behaviour, can be explained.

We study the existence of grain boundaries in the Swift–Hohenberg equation. The analysis relies on a spatial dynamics formulation of the existence problem and a centre-manifold reduction. In this setting, the grain boundaries are found as heteroclinic orbits of a reduced system of ordinary differential equations in normal form. We show persistence of the leading-order approximation using transversality induced by wavenumber selection.

We study the structural stability of a problem in a porous medium when the density of saturating liquid is a nonlinear function of temperature and an internal heat source is present. We prove a convergence result for the Forchheimer coefficient. That is to say, when λ → 0, the solution of the non-isothermal flow in a porous medium of the Forchheimer type, see (1.1), can converge to the solution of the equivalent Darcy type.

Liquid crystal elastomers present features not found in ordinary elastic materials, such as semi-soft elasticity and the related stripe domain phenomenon. In this paper, the two-dimensional Bladon–Terentjev–Warner model and the one-constant Oseen–Frank energy expression are combined to study the liquid crystal elastomer. We also impose two material constraints, the incompressibility of the elastomer and the unit director norm of the liquid crystal. We prove existence of minimiser of the energy for the proposed model. Next we formulate the discrete model, and also prove that it possesses a minimiser of the energy. The inf-sup values of the discrete linearised system are then related to the smallest singular values of certain matrices. Next the existence and uniqueness of the Lagrange multipliers associated with the two material constraints are proved under the assumption that the inf-sup conditions hold. Finally numerical simulations of the clamped-pulling experiment are presented for elastomer samples with aspect ratio 1 or 3. The semi-soft elasticity is successfully recovered in both cases. The stripe domain phenomenon, however, is not observed, which might be due to the relative coarse mesh employed in the numerical experiment. Possible improvements are discussed that might lead to the recovery of the stripe domain phenomenon.

A two-dimensional computational study is performed on the texturing of fibre-filled nematic liquid crystals using the Landau-de Gennes model describing the spatio-temporal evolution of the second moment of the orientation distribution function or quadrupolar tensor order parameter. The investigation is performed on a consistent computational domain comprising a square array of four circular fibres embedded within a unit square containing a uniaxial low molar mass calamitic liquid crystal. Interest is focused on the role of temperature, boundary conditions and their effect on the nucleation and evolution of defect structures. Thermal effects are characterised below and above the temperature at which the nematic state is stable. Simulations in the stable nematic state serves as a scenario for investigating the effect of imposing different external boundary conditions, namely periodic and Dirichlet; the former describes a square lattice array of fibres embedded in a nematic liquid crystal, and the latterdescribes a four-fibre arrangement in an aligned nematic material. In each case, the influence of temperature is characterised, with defect structures forming and either remaining or splitting into lower strength defects. For fibre lattices, splitting transitions of defects at the centre of the domain occur at a critical temperature, but for the four-fibre arrangement, defect transitions occur continuously over a temperature range. The discontinuous defect splitting transition in fibre arrays occurs at lower temperatures than the continuous defect transformation in the four-fibre arrangement. At sufficiently low temperatures, the four-fibre arrangement and the fibre lattice give the same texture consisting of two disclination lines close to each fibre. The evolution of the texture with respect to temperature can be characterised as a change from single-fibre mode at low temperature to a collective mode with a centre-located heterogeneity at higher temperature. At higher temperatures, in the stable isotropic state, it is shown that surface-induced ordering arising from the fibre/liquid crystal interaction propagates into the bulk forming thin disclination lattices around the four-fibre configuration.

We consider a diffusive Nicholson's blowflies equation with non-local delay and study the stability of the uniform steady states and the possible Hopf bifurcation. By using the upper- and lower solutions method, the global stability of constant steady states is obtained. We also discuss the local stability via analysis of the characteristic equation. Moreover, for a special kernel, the occurrence of Hopf bifurcation near the steady state solution and the stability of bifurcated periodic solutions are given via the centre manifold theory. Based on laboratory data and our theoretical results, we address the influence of various types of vaccinations in controlling the outbreak of blowflies.