Taking vibration converter of intelligent damper for drill strings as the study object, this paper analyzes the influential factors of motion state of the ball and conducts an explicit dynamics simulation by establishing a mechanics model of vibration converter. The study basis is Newton’s laws of motion, d’alembert’s principle and hertz contact theory. and we use world coordinate system, rotating coordinate system and Frenet coordinate system to deduce kinematics equations of vibration converter. The ultimate result demonstrates that the axial velocity and maximum contact stress change with the increment of ball diameter and helix angle.It also proves the validity of our derived kinematics and mechanical models and provides a good consultant value for the design and theoretical arithmetic of vibration converter for intelligent damper of drill strings.

A fully higher-order compact (HOC) finite difference scheme on the 9-point two-dimensional (2D) stencil is formulated for solving the steady-state laminar mixed convection flow in a lid-driven inclined square enclosure filled with water-Al2O3 nanofluid. Two cases are considered depending on the direction of temperature gradient imposed (Case I, top and bottom; Case II, left and right). The developed equations are given in terms of the stream function-vorticity formulation and are non-dimensionalized and then solved numerically by a fourth-order accurate compact finite difference method. Unlike other compact solution procedure in literature for this physical configuration, the present method is fully compact and fully higher-order accurate. The fluid flow, heat transfer and heat transport characteristics were illustrated by streamlines, isotherms and averaged Nusselt number. Comparisons with previously published work are performed and found to be in excellent agreement. A parametric study is conducted and a set of graphical results is presented and discussed to elucidate that significant heat transfer enhancement can be obtained due to the presence of nanoparticles and that this is accentuated by inclination of the enclosure at moderate and large Richardson numbers.

In this paper, a meshless regularization method of fundamental solutions is proposed for a two-dimensional, two-phase linear inverse Stefan problem. The numerical implementation and analysis are challenging since one needs to handle composite materials in higher dimensions. Furthermore, the inverse Stefan problem is ill-posed since small errors in the input data cause large errors in the desired output solution. Therefore, regularization is necessary in order to obtain a stable solution. Numerical results for several benchmark test examples are presented and discussed.

In this paper, we construct semi-discrete two-grid finite element schemes and full-discrete two-grid finite element schemes for the two-dimensional time-dependent Schrödinger equation. The semi-discrete schemes are proved to be convergent with an optimal convergence order and the full-discrete schemes, verified by a numerical example, work well and are more efficient than the standard finite element method.

In this paper, the Crank-Nicolson linear finite volume element method is applied to solve the distributed optimal control problems governed by a parabolic equation. The optimal convergent order O(h2+k2) is obtained for the numerical solution in a discrete L2-norm. A numerical experiment is presented to test the theoretical result.

This paper deals with the solvability and the convergence of a class of unsymmetric Meshless Local Petrov-Galerkin (MLPG) method with radial basis function (RBF) kernels generated trial spaces. Local weak-form testings are done with step-functions. It is proved that subject to sufficiently many appropriate testings, solvability of the unsymmetric RBF-MLPG resultant systems can be guaranteed. Moreover, an error analysis shows that this numerical approximation converges at the same rate as found in RBF interpolation. Numerical results (in double precision) give good agreement with the provided theory.

This work presents a moving mesh methodology based on the solution of a pseudo flow problem. The mesh motion is modeled as a pseudo Stokes problem solved by an explicit finite element projection method. The mesh quality requirements are satisfied by employing a null divergent velocity condition. This methodology is applied to triangular unstructured meshes and compared to well known approaches such as the ones based on diffusion and pseudo structural problems. One of the test cases is an airfoil with a fully meshed domain. A specific rotation velocity is imposed as the airfoil boundary condition. The other test is a set of two cylinders that move toward each other. A mesh quality criteria is employed to identify critically distorted elements and to evaluate the performance of each mesh motion approach. The results obtained for each test case show that the pseudo-flow methodology produces satisfactory meshes during the moving process.

In this paper, a new displacement based high-order shear deformation theory is introduced for the static response of functionally graded plate. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, has strong similarity with classical plate theory in many aspects, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. The mechanical properties of the plate are assumed to vary continuously in the thickness direction by a simple power-law distribution in terms of the volume fractions of the constituents. Numerical illustrations concerned flexural behavior of FG plates with Metal-Ceramic composition. Parametric studies are performed for varying ceramic volume fraction, volume fraction profiles, aspect ratios and length to thickness ratios. The validity of the present theory is investigated by comparing some of the present results with those of the classical, the first-order and the other higher-order theories. It can be concluded that the proposed theory is accurate and simple in solving the static behavior of functionally graded plates.

The alternating direction implicit (ADI) method is a highly efficient technique for solving multi-dimensional time dependent initial-boundary value problems on rectangles. When the ADI technique is coupled with orthogonal spline collocation (OSC) for discretization in space we not only obtain the global solution efficiently but the discretization error with respect to space variables can be of an arbitrarily high order. In [2], we used a Crank Nicolson ADI OSC method for solving general nonlinear parabolic problems with Robin’s boundary conditions on rectangular polygons and demonstrated numerically the accuracy in various norms. A natural question that arises is: Does this method have an extension to non-rectangular regions? In this paper, we present a simple idea of how the ADI OSC technique can be extended to some such regions. Our approach depends on the transfer of Dirichlet boundary conditions in the solution of a two-point boundary value problem (TPBVP). We illustrate our idea for the solution of the heat equation on the unit disc using piecewise Hermite cubics.

A submerged turbulent plane jet in shallow water impinging vertically onto the free surface will produce a large-scale flapping motion when the jet exit velocity is larger than a critical one. The flapping phenomenon is verified in this paper through a large eddy simulation where the free surface is modeled by volume of fluid approach. The quantitative results for flapping jet are found to be in good agreement with available experimental data in terms of mean velocity, flapping-induced velocity and turbulence intensity. Results show that the flapping motion is a new flow pattern with characteristic flapping frequency for submerged turbulent plane jets, the mean centerline velocity decay is considerably faster than that of the stable impinging jet without flapping motion, and the flapping-induced velocities are as important as the turbulent fluctuations.

Based on the Mindlin’s first-order shear deformation plate theory this paper focuses on the free vibration behavior of functionally graded nanocomposite plates reinforced by aligned and straight single-walled carbon nanotubes (SWCNTs). The material properties of simply supported functionally graded carbon nanotube-reinforced (FGCNTR) plates are assumed to be graded in the thickness direction. The effective material properties at a point are estimated by either the Eshelby-Mori-Tanaka approach or the extended rule of mixture. Two types of symmetric carbon nanotubes (CNTs) volume fraction profiles are presented in this paper. The equations of motion and related boundary conditions are derived using the Hamilton’s principle. A semi-analytical solution composed of generalized differential quadrature (GDQ) method, as an efficient and accurate numerical method, and series solution is adopted to solve the equations of motions. The primary contribution of the present work is to provide a comparative study of the natural frequencies obtained by extended rule of mixture and Eshelby-Mori-Tanaka method. The detailed parametric studies are carried out to study the influences various types of the CNTs volume fraction profiles, geometrical parameters and CNTs volume fraction on the free vibration characteristics of FGCNTR plates. The results reveal that the prediction methods of effective material properties have an insignificant influence of the variation of the frequency parameters with the plate aspect ratio and the CNTs volume fraction.

In this paper, we investigate the method of fundamental solutions (MFS) for solving exterior Helmholtz problems with high wave-number in axisymmetric domains. Since the coefficient matrix in the linear system resulting from the MFS approximation has a block circulant structure, it can be solved by the matrix decomposition algorithm and fast Fourier transform for the fast computation of large-scale problems and meanwhile saving computer memory space. Several numerical examples are provided to demonstrate its applicability and efficacy in two and three dimensional domains.

Discontinuities usually appear in solutions of nonlinear conservation laws even though the initial condition is smooth, which leads to great difficulty in computing these solutions numerically. The Runge-Kutta discontinuous Galerkin (RKDG) methods are efficient methods for solving nonlinear conservation laws, which are high-order accurate and highly parallelizable, and can be easily used to handle complicated geometries and boundary conditions. An important component of RKDG methods for solving nonlinear conservation laws with strong discontinuities in the solution is a nonlinear limiter, which is applied to detect discontinuities and control spurious oscillations near such discontinuities. Many such limiters have been used in the literature on RKDG methods. A limiter contains two parts, first to identify the “troubled cells”, namely, those cells which might need the limiting procedure, then to replace the solution polynomials in those troubled cells by reconstructed polynomials which maintain the original cell averages (conservation). [SIAM J. Sci. Comput., 26 (2005), pp. 995–1013.] focused on discussing the first part of limiters. In this paper, focused on the second part, we will systematically investigate and compare a few different reconstruction strategies with an objective of obtaining the most efficient and reliable reconstruction strategy. This work can help with the choosing of right limiters so one can resolve sharper discontinuities, get better numerical solutions and save the computational cost.

This paper proposes a Susceptible-Infective-Susceptible (SIS) model to study the malaria transmission with treatment by considering logistic growth of mosquito population. In this work, it is assumed that the treatment rate is proportional to the number of infectives below the capacity and is constant when the number of infectives is greater than the capacity. We find that the system exhibits backward bifurcation if the capacity is small and it gives bi-stable equilibria which makes the system more sensitive to the initial conditions. The existence and stability of the equilibria of the model are discussed in-detail and numerical simulations are presented to illustrate the numerical results.

A cell conservative flux recovery technique is developed here for vertex-centered finite volume methods of second order elliptic equations. It is based on solving a local Neumann problem on each control volume using mixed finite element methods. The recovered flux is used to construct a constant free a posteriori error estimator which is proven to be reliable and efficient. Some numerical tests are presented to confirm the theoretical results. Our method works for general order finite volume methods and the recovery-based and residual-based a posteriori error estimators is the first result on a posteriori error estimators for high order finite volume methods.

Invariant solutions of two-dimensional elastodynamics in linear homogeneous isotropic materials are considered via the group theoretical method. The second order partial differential equations of elastodynamics are reduced to ordinary differential equations under the infinitesimal operators. Three invariant solutions are constructed. Their graphical figures are presented and physical meanings are elucidated in some cases.

In this article, we have introduced a Taylor collocation method, which is based on collocation method for solving fractional Riccati differential equation. The fractional derivatives are described in the Caputo sense. This method is based on first taking the truncated Taylor expansions of the solution function in the fractional Riccati differential equation and then substituting their matrix forms into the equation. Using collocation points, the systems of nonlinear algebraic equation is derived. We further solve the system of nonlinear algebraic equation using Maple 13 and thus obtain the coefficients of the generalized Taylor expansion. Illustrative examples are presented to demonstrate the effectiveness of the proposed method.

Multiclass Lighthill-Whitham-Richards traffic models [Benzoni-Gavage and Colombo, Euro. J. Appl. Math., 14 (2003), pp. 587–612; Wong and Wong, Transp. Res. A, 36 (2002), pp. 827–841] give rise to first-order systems of conservation laws that are hyperbolic under usual conditions, so that their associated Cauchy problems are well-posed. Anticipation lengths and reaction times can be incorporated into these models by adding certain conservative second-order terms to these first-order conservation laws. These terms can be diffusive under certain circumstances, thus, in principle, ensuring the stability of the solutions. The purpose of this paper is to analyze the stability of these diffusively corrected models under varying reaction times and anticipation lengths. It is demonstrated that instabilities may develop for high reaction times and short anticipation lengths, and that these instabilities may have controlled frequencies and amplitudes due to their nonlinear nature.

This paper presents the stability of two-dimensional functionally graded (2D-FG) cylindrical shells subjected to combined external pressure and axial compression loads, based on classical shell theory. The material properties of functionally graded cylindrical shell are graded in two directional (radial and axial) and determined by the rule of mixture. The Euler’s equation is employed to derive the stability equations, which are solved by GDQ method to obtain the critical mechanical buckling loads of the 2D-FG cylindrical shells. The effects of shell geometry, the mechanical properties distribution in radial and axial direction on the critical buckling load are studied and compared with a cylindrical shell made of 1D-FGM. The numerical results reveal that the 2D-FGM has a significant effect on the critical buckling load.

This paper is concerned with the development of an efficient algorithm for the analytic solutions of nonlinear fractional differential equations. The proposed algorithm Laplace homotopy analysis method (LHAM) is a combined form of the Laplace transform method with the homotopy analysis method. The biggest advantage the LHAM has over the existing standard analytical techniques is that it overcomes the difficulty arising in calculating complicated terms. Moreover, the solution procedure is easier, more effective and straightforward. Numerical examples are examined to demonstrate the accuracy and efficiency of the proposed algorithm.