Crossref Citations
This Book has been
cited by the following publications. This list is generated based on data provided by Crossref.
Verweyst, Brent E.
and
Tucker, Charles L.
2002.
Fiber Suspensions in Complex Geometries: Flow/Orientation Coupling.
The Canadian Journal of Chemical Engineering,
Vol. 80,
Issue. 6,
p.
1093.
Boylan, Sarah
Abrams, Lisa M.
and
Castro, Jose M.
2003.
Predicting molding forces during sheet molding compounds (SMC) compression molding. II: Effect of SMC composition.
Polymer Composites,
Vol. 24,
Issue. 6,
p.
731.
Castro, José M
Ríos, Mauricio Cabrera
and
Mount-Campbell, Clark A
2004.
Modelling and simulation in reactive polymer processing.
Modelling and Simulation in Materials Science and Engineering,
Vol. 12,
Issue. 3,
p.
S121.
Yao, Donggang
and
Kim, Byung
2004.
Scaling Issues in Miniaturization of Injection Molded Parts.
Journal of Manufacturing Science and Engineering,
Vol. 126,
Issue. 4,
p.
733.
Li, Chunsheng
and
Thomas, Brian G.
2004.
Thermomechanical finite-element model of shell behavior in continuous casting of steel.
Metallurgical and Materials Transactions B,
Vol. 35,
Issue. 6,
p.
1151.
Osswald, Tim A.
and
Hernández-Ortiz, Juan P.
2006.
Polymer Processing.
p.
i.
Osswald, Tim A.
and
Hernández-Ortiz, Juan P.
2006.
Polymer Processing.
p.
xvii.
Kang, Sung Yong
Kim, Sun Kyoung
and
Lee, Woo Il
2008.
Penalty formulation for postfilling analysis during injection molding.
International Journal for Numerical Methods in Fluids,
Vol. 57,
Issue. 2,
p.
139.
Dantzig, Jonathan A.
2008.
Casting.
p.
288.
Mendez, Patricio F.
Furrer, Reinhard
Ford, Ryan
and
Ordóñez, Fernando
2008.
Scaling laws as a tool of materials informatics.
JOM,
Vol. 60,
Issue. 3,
p.
60.
Tucker, Charles
2009.
Mixing and Compounding of Polymers.
p.
5.
Dantzig, Jonathan A.
2009.
Fundamentals of Modeling for Metals Processing.
p.
70.
Petrus, Bryan
Bentsman, Joseph
and
Thomas, Brian G.
2010.
Feedback control of the two-phase Stefan problem, with an application to the continuous casting of steel.
p.
1731.
Krane, Matthew John M.
2010.
Metals Process Simulation.
p.
157.
Koric, Seid
Hibbeler, Lance C.
Liu, Rui
and
Thomas, Brian G.
2010.
Multiphysics Model of Metal Solidification on the Continuum Level.
Numerical Heat Transfer, Part B: Fundamentals,
Vol. 58,
Issue. 6,
p.
371.
Koric, Seid
Thomas, Brian G.
and
Voller, Vaughan R.
2010.
Enhanced Latent Heat Method to Incorporate Superheat Effects into Fixed-Grid Multiphysics Simulations.
Numerical Heat Transfer, Part B: Fundamentals,
Vol. 57,
Issue. 6,
p.
396.
Mendez, P F
2011.
Synthesis and generalisation of welding fundamentals to design new welding technologies: Status, challenges and a promising approach.
Science and Technology of Welding and Joining,
Vol. 16,
Issue. 4,
p.
348.
Koribilli, Neeharika
Aravamudan, Kannan
and
Aditya Varadhan, M. U. S. V.
2011.
Quantifying Enhancement in Heat Transfer Due to Natural Convection During Canned Food Thermal Sterilization in a Still Retort.
Food and Bioprocess Technology,
Vol. 4,
Issue. 3,
p.
429.
Li, Xuejuan
Ouyang, Jie
Li, Qiang
and
Ren, Jinlian
2012.
Simulations of a full three‐dimensional packing process and flow‐induced stresses in injection molding.
Journal of Applied Polymer Science,
Vol. 126,
Issue. 5,
p.
1532.
Park, S. H.
Kim, S. M.
Kang, S. Y.
Lee, W. I.
and
Yoo, Y. E.
2012.
Global/Local Analysis of Filling Behavior during Injection Molding for a Large Scale Plate with Micro Patterns.
International Polymer Processing,
Vol. 27,
Issue. 2,
p.
205.