Abe, T., Kikuchi, J., and Takeuchi, H.. 1979. An investigation of turbine disk cooling: experimental investigation and observation of hot gas flow into a wheel space. 13th International Congress on Combustion Engines (CIMAC), Vienna, Austria, May 7–10, Paper No. GT30.Google Scholar

Bayley, F. J., and Owen, J. M.. 1970. Fluid dynamics of a shrouded disk system with a radial outflow of coolant. ASME J. Eng. Power. 92(3): 335–341.CrossRefGoogle Scholar

Bohn, D., and Wolff, M.. 2003. Improved formulation to determine minimum sealing flow – cw,min – for different sealing configurations. ASME Paper No. GT2003–38465.Google Scholar

Carnahan, B., Luther, H. A., and Wilkes, J. O.. 1969. Applied Numerical Methods. New York: John Wiley & Sons.Google Scholar

Chew, J. W., Green, T., and Turner, A. B.. 1994. Rim sealing of rotor-stator wheelspaces in the presence of external flow. ASME Paper No. 94-GT-126.CrossRefGoogle Scholar

Childs, P. R. N. 2011. Rotating Flow. New York: Elsevier.Google Scholar

Daily, J. W., and Nece, R. E.. 1960. Chamber dimension effects on induced flow and frictional resistance of enclosed rotating disks. J. Basic Eng. Trans. ASME. 82(1): 217–232.CrossRefGoogle Scholar

Haaser, F., Jack, J., and McGreehan, W. F.. 1988. Windage rise and flowpath gas ingestion in turbine rim cavities. ASME J. Eng. Gas Turbines Power. 110 (1): 78–85.Google Scholar

Hamabe, K., and Ishida, K.. 1992. Rim seal experiments and analysis of a rotor-stator system with non-axisymmetric main flow. ASME Paper No. 92-GT-160.CrossRefGoogle Scholar

Hoerner, S. F. 1965. Fluid-Dynamic Drag: Theoretical, Experimental, and Statistical Information. Author-published.Google Scholar

Johnson, B. V., Jakoby, R., Bohn, D., and Cunat, D.. 2006. A method for estimating the influence of time-dependent vane and blade pressure fields on turbine rim seal ingestion. ASME Paper No. GT2006–90853.CrossRefGoogle Scholar

Johnson, B. V., Wang, C. Z., and Roy, R.. 2008. A rim seal orifice model with two cds and effects of swirl in seals. ASME Paper No.GT2008–50650.Google Scholar

McAdams, W. H. 1954. Heat Transmission, 3rd edn. New York: McGraw-Hill.Google Scholar

Newman, B. G. 1983. Flow and heat transfer on a disk rotating beneath a forced vortex. AIAA J. 22 (8):1066–1070.Google Scholar

Oates, G. C. 1988. Aerothermodynamics of Gas Turbines and Rocket Propulsion: Revised and Enlarged. Washington, DC: AIAA.Google Scholar

Owen, J. M. 2011a. Prediction of ingestion through turbine rim seals–part1: rotationally induced ingress. ASME J. Turbomach. 133(3): 031005.1–031005.9.Google Scholar

Owen, J. M. 2011b. Prediction of ingestion through turbine rim seals–part 2: externally induced and combined ingress. ASME J. Turbomach. 133(3):031006.1–031006.9.Google Scholar

Owen, J. M., and Rogers, R. H.. 1989. Flow and Heat Transfer in Rotating-Disc System. Vol. 1 Rotor-Stator Systems. Taunton, England: Research Studies Press.Google Scholar

Owen, J. M., and Rogers, R. H.. 1995. Flow and Heat Transfer in Rotating-Disc System: Vol. 2 Rotating Cavities. Taunton,England: Research Studies Press.Google Scholar

Owen, J., Pountney, O., and Lock, G.. 2012. Prediction of ingress through turbine rim seals – part 2: combined ingress. ASME J.Turbomach. 134(3): 031013.1–031013.7.Google Scholar

Owen, J. M., Zhou, K., Pountney, O., Wilson, M., and Lock, G., 2012. Prediction of ingress through turbine rim seals–part 1: externally induced ingress. ASME J. Turbomach. 134(3): 031012.1–031012.1 3.Google Scholar

Owen, J. M., and Long, C. A.. 2015. Review of buoyancy-induced flow in rotating cavities. ASME J. Turbomach. 137(11): 111001.1–111001.13.Google Scholar

Owen, J. M., and Tang, H.. 2015. Theoretical model of buoyancy-induced flow in rotating cavities. ASME J. Turbomach. 137(11): 111005.1–111005.7.Google Scholar

Phadke, U., and Owen, J.. 1988. Aerodynamic aspects of the sealing of gas-turbine rotor-stator systems: part 3: the effect of non-axisymmetric external flow on seal performance. Inter. J. Heat and Fluid Flow. 9(2): 113–117.Google Scholar

Reichert, A. W., and Lieser, D.. 1999. Efficiency of air-purged rotor-stator seals in combustion turbine engines. ASME Paper No. 99-GT-250.Google Scholar

Scanlon, T., Wilkes, J., Bohn, D., and Gentilhomme, O.. 2004. A simple method of estimating ingestion of annulus gas into a turbine rotor stator cavity in the presence of external pressure gradients. ASME Paper No.GT2004–53097.Google Scholar

Schlichting, H. 1979. Boundary Layer Theory, 7th edn. New York: McGraw-Hill.Google Scholar

Scobie, J. A., Sangan, C. M., Owen, J. M., and Lock, G. D.. 2016. Review of ingress in gas turbines. ASME J. Eng. Gas Turbines & Power. 138:120801.1–120801.16.CrossRefGoogle Scholar

Sultanian, B. K., and Nealy, D. A.. 1987. Numerical modeling of heat transfer in the flow through a rotor cavity. In Metzger, D. E., ed., Heat Transfer in Gas Turbines, HTD-Vol. 87, 11–24, New York: ASME.Google Scholar

Atkins, N. R., and Kanjirakkad, V.. 2014. Flow in a rotating cavity with axial throughflow at engine representative conditions. ASME Paper No. GT2014–27174.Google Scholar

Bayley, F. J., and Owen, J. M.. 1969. Flow between a rotating and stationary disc. Aeronautical Quarterly. 20:333–354.Google Scholar

Bayley, F. J., Long, C. A., and Turner, A. B.. 1993. Discs and drums: the thermo-fluid dynamics of rotating surfaces. Proc. IMechE. Part C: J. Mech. Engineering Science. 207: 73–81.Google Scholar

Benim, A. C., Brillert, D., and Cagan, M.. 2004. Investigation into the computational analysis of direct-transfer pre-swirl system for gas turbine blade cooling. ASME Paper No. GT2004–54151.Google Scholar

Benra, F.-K., Dohmen, H. J., and Schneider, O.. 2008. Application of an enhanced 1D network model to calculate the flow properties of a pre-swirl secondary air system. ASME Paper No. GT2008–50442.CrossRefGoogle Scholar

Bohn, D., Deuker, E., Emunds, R., and Gorzelite, V.. 1995. Experimental and theoretical investigations of heat transfer in closed gas-filled rotating annuli. ASME J. Turbomach. 117(1): 175–183.Google Scholar

Bricaud, C., Geis, T., Dullenkopf, K., and Bauer, H.-J.. 2007. Measurement and analysis of aerodynamic and thermodynamic losses in pre-swirl system arrangements. ASME Paper No. GT2007–27191.CrossRefGoogle Scholar

Case, P. 1966. Measurements of entrainment by a free rotating disk. J. Roy. Aero. Soc. 71: 124–129.Google Scholar

Cham, T.-S. and Head, M. R.. 1969. Turbulent boundary layer flow on a rotating disk. J. Fluid Mech. 37(1): 129–149.Google Scholar

Chew, J. W., Hills, N. J., Khalatov, S., Scanlon, T., and Turner, A. B.. 2003. Measurement and analysis of flow in a pre-swirled cooling air delivery system. ASME Paper No. GT2003–38084.Google Scholar

Chew, J. W., Ciampoli, F., Hills, N. J., and Scanlon, T.. 2005. Pre-swirled cooling air delivery system performance. ASME Paper No. GT2005–68323.Google Scholar

Ciampoli, F., Chew, J. W., Shahpar, S., and Willocq, E.. 2007. Automatic optimization of pre-swirl nozzle design. ASME J. Eng. Gas Turbines & Power.129: 387–393.Google Scholar

Didenko, R. A., Karelin, D. V., Levlev, D. G., Shmotin, Y. N., and Nagoga, G. P.. 2012. Pre-swirl cooling air delivery system performance study. ASME Paper No. GT2012–68342.CrossRefGoogle Scholar

Dittmann, M., Geis, T., Schramm, V., Kim, S., and Wittig, S.. 2002. Discharge coefficients of a pre-swirl system in secondary air systems. ASME J. Turbomach. 124: 119–124.CrossRefGoogle Scholar

Dittmann, M., Dullenkopf, K., and Wittig, S.. 2004. Discharge coefficients of rotating short orifices with radiused and chamfered inlets. ASME J. Eng. Gas Turbine & Power. 126: 803–808.CrossRefGoogle Scholar

Dittmann, M., Dullenkopf, K., and Wittig, S.. 2005. Direct-transfer pre-swirl system: A one-dimensional modular characterization of the flow. ASME J. Eng. Gas Turbine & Power. 127: 383–388.Google Scholar

Dweik, Z., Briley, R., Swafford, T., and Hunt, B.. 2009. Computational study of the heat transfer of the buoyancy-driven rotating cavity with axial throughflow of cooling air. ASME Paper No. GT2009–59978.CrossRefGoogle Scholar

Dweik, Z., Briley, R., Swafford, T., and Hunt, B.. 2009. Computational study of the unsteady flow structure of the buoyancy-driven rotating cavity with axial throughflow of cooling air. ASME Paper No. GT2009–59969.CrossRefGoogle Scholar

El-Oun, Z. B., and Owen, J. M.. 1989. Pre-swirl blade-cooling effectiveness in an adiabatic rotor-stator system. ASME J. Turbomach. 111(4):522–529.CrossRefGoogle Scholar

Farthing, P. R., Long, C. A., Owen, J. M., and Pincombe, J. R.. 1992. Rotating cavity with axial throughflow of cooling air: Flow structure. ASME J. Turbomach. 114(1): 237–246.Google Scholar

Farthing, P. R., Long, C. A., Owen, J. M., and Pincombe, J. R.. 1992. Rotating cavity with axial throughflow of cooling air: Heat transfer. ASME J. Turbomach. 114(1): 229–236.Google Scholar

Gartner, W. 1997. A prediction method for the frictional torque of a rotating disk in a stationary housing with superimposed radial outflow. ASME Paper No. 97-GT-204.Google Scholar

Geis, T., Dittmann, M., and Dullenkopf, K.. 2004. Cooling air temperature reduction in a direct transfer pre-swirl system. ASME J. Eng. Gas Turbines & Power. 126: 809–815.Google Scholar

Glicksman, L. R. and Lienhard, J. H. 2016. Modeling and Approximation in Heat Transfer. New York: Cambridge University Press.Google Scholar

Gord, M. F., Wilson, M., and Owen, J. M.. 2005. Numerical and theoretical study of flow and heat transfer in a pre-swirl rotor-stator system. ASME Paper No. GT2005– 68135.Google Scholar

Green, B. R., Mathison, R. M., and Dunn, M. G.. 2012. Time-averaged and time-accurate aerodynamic effects of forward rotor cavity purge flow for a high-pressure turbine – part I: Analytical and experimental comparisons. ASME Paper No. GT2012–69937.Google Scholar

Green, B. R., Mathison, R. M., and Dunn, M. G.. 2012. Time-averaged and time-accurate aerodynamic effects of forward rotor cavity purge flow for a high-pressure turbine – part II: Analytical flow field analysis. ASME Paper No. GT2012–69939.Google Scholar

Guida, R., Lengani, D., Simoni, D., Ubaldi, M., and Zunino, P.. 2018. New facility setup for the investigation of cooling flow, viscous and rotational effects on the interstage seal flow behavior of a gas turbine. ASME Paper No. GT2018–75630.Google Scholar

Huening, M. 2010. Parametric single gap turbine rim seal model with boundary generation for asymmetric external flow. ASME Paper No. GT2010–22434.Google Scholar

Imayama, S., Alfredsson, P. H., and Lingwood, R. J.. 2014. On the laminar-turbulent transition of the rotating-disk flow: The role of absolute instability. J. Fluid Mech. 745(2):132–163.Google Scholar

Idelchik, I. E. 2005. Handbook of Hydraulic Resistance, 3rd edn. Delhi: Jaico Publishing House.Google Scholar

Jarzombek, K., Dohmen, H. J., Benra, F.-K., and Schneider, O.. 2006. Flow analysis in gas turbine pre-swirl cooling air systems – variation of geometric parameters. ASME Paper No. GT2006–90445.Google Scholar

Jarzonbek, K., Benra, F.-K., Dohmen, H. J., and Schneider, O.. 2007. CFD analysis of flow in high-radius pre-swirl systems. ASME Paper No. GT2007–27404.Google Scholar

Javiya, U., Chew, J., and Hills, N.. 2011. A comparative study of cascade vanes and drilled nozzle design for pre-swirl. ASME Paper No. GT2011–46006.Google Scholar

Karnahl, J., Wolfersdorf, J. V., Tham, K. M., Wilson, M., and Lock, G.. 2011. CFD simulations of flow and heat transfer in a pre-swirl system: influence of rotating-stationary domain interface. ASME Paper No. GT2011–45085.Google Scholar

Karabay, H., Chen, J. X., Pilbrow, R., Wilson, M., and Owen, J. M.. 1999. Flow in a “cover-plate” pre-swirl rotor-stator system. ASME J. Turbomach. 121: 160–166.Google Scholar

Karabay, H., Pilbrow, R., Wilson, M., and Owen, J. M.. 2000. Performance of pre-swirl rotating-disc systems. J. Eng. Gas Turbines & Power. 122: 442–450.Google Scholar

Karabay, H., Wilson, M., and Owen, J. M.. 2001. Approximate solutions for flow and heat transfer in pre-swirl rotating-disc systems. ASME Paper No. 2001-GT-0200.CrossRefGoogle Scholar

Kim, Y. W., Okpara, M. N., Hamm, H., Roy, R. P., and Moon, H.-K.. 2018. Hot gas ingestion model employing flow network with axisymmetric solvers. ASME Paper No. GT2018–77055.Google Scholar

Laurello, V., Yuri, M., and Fujii, K.. 2004. Measurement and analysis of an efficient turbine rotor pump work reduction system incorporating pre-swirl nozzles and a free vortex pressure augmentation chamber. ASME Paper No. GT2004–53090.Google Scholar

Lee, H. J. Lee, S. Kim, , and Cho, J.. 2018. Pre-swirl system design including inlet duct shape by using CFD analysis. ASME Paper No. GT2018–76323.Google Scholar

Lewis, P. 2008. Pre-swirl rotor-stator systems: Flow and heat transfer. PhD thesis, University of Bath.Google Scholar

Lewis, P., Wilson, M., Lock, G., and Owen, J. M.. 2008. Effect of radial location of nozzles on performance of pre-swirl systems. ASME Paper No. GT2008–50296.Google Scholar

Liu, G., Li, B., Jiang, Z., and Zhang, L.. 2012. Influences of pre-swirl angle on the flow characteristics of pre-swirl nozzle. J. Propulsion Technology. 33(5):740–746.Google Scholar

Liu, G., H. Wu, Q. Feng, , and Liu, S.. 2016. Theoretical and numerical analysis on the temperature drop and power consumption of a pre-swirl system. ASME Paper No. GT2016–56742.CrossRefGoogle Scholar

Liu, Y., Liu, G., Kong, X., and Feng, Q.. 2016. Design and numerical analysis of a new type of pre-swirl nozzle. ASME Paper No. GT2016–56738.CrossRefGoogle Scholar

Lock, G. D., Wilson, M., and Owen, J. M.. 2005. Influence of fluid dynamics on heat transfer in a pre-swirl rotating-disc system. ASME J. Eng. Gas Turbines & Power. 127:791–797.Google Scholar

Long, C. A., Miche, N. D. D., and Childs, P. R. N.. 2007. Flow measurements inside a heated multiple rotating cavity with axial throughflow. Int. J. Heat Fluid Flow. 28(6): 1391–1404.Google Scholar

Lugt, H. J. 1995. Vortex Flow in Nature and Technology. Malabar: Krieger Publishing Company.Google Scholar

Miller, D. S. 1990. Internal Flow Systems, 2nd edn. Houston: Gulf Publishing CompanyGoogle Scholar

Mirzamoghadam, A. V., Kanjiyani, S., Riahi, A., Vishnumolakala, R., and Gundeti, L.. 2014. Unsteady 360 computational fluid dynamics validation of a turbine stage mainstream/disk cavity interaction. ASME J. Turbomach. 137: 011008.1– 011008.9.Google Scholar

Mott, R. L. 2006. Applied Fluid Mechanics, 6th edn. Upper Saddle River, NJ: Pearson Prentice Hall.Google Scholar

Nickol, J., Tomko, M., Mathison, R., Liu, J. S., Morris, M., and Malak, M. F.. 2018. Heat transfer and pressure measurements for the forward purge cavity, inner endwall, and rotor platform of a cooled transonic turbine stage. ASME Paper No. GT2018–76978.Google Scholar

Ong, C. L., and Owen, J. M.. 1989. Boundary-layer flows in rotating cavities. Trans. ASME, J. Turbomachinery. 111(3): 341–348.Google Scholar

Owen, J. M. 1988. Air-cooled gas turbine discs: A review of recent research. Int. J. Heat and Fluid Flow. 9(4): 354–365.Google Scholar

Owen, J. M. 1989. An approximate solution for the flow between a rotating and a stationary disk. Trans. ASME, J. Turbomachinery. 111(3): 323–332.Google Scholar

Owen, J. M. 2010. Thermodynamic analysis of buoyancy-induced flow in rotating cavities. ASME, J. Turbomachinery. 132(3). 031006–1-031006–7.Google Scholar

Owen, J. M., and Powell, J.. 2006. Buoyancy-induced flow in heated rotating cavities. ASME J. Eng. Gas Turbines Power. 128(1): 128–134.Google Scholar

Owen, J. M., Abrahamsson, H., and Linblad, K.. 2007. Buoyancy-induced flow in open rotating cavities. ASME J. Eng. Gas Turbines Power. 129(4): 893–900.Google Scholar

Patinios, M., Ong, I. L., Scobie, J. A., Lock, G. D., and Sangan, C. M.. 2018. Influence of leakage flows on hot gas ingress. ASME Paper No. GT2018–75071.Google Scholar

Pitz, D. B., Chew, J. W., and Marksen, O.. 2018. Large-eddy simulation of buoyancy-induced flow in a sealed rotating cavity. ASME Paper No. GT2018–75111.CrossRefGoogle Scholar

Popp, O., Zimmerman, H., and Kutz, J.. 1998. CFD analysis of cover-plate receiver flow. ASME J. Turbomach. 120: 43–49.Google Scholar

Puttock-Brown, M. R., Rose, M. G., and Long, C. A.. 2017. Experimental and computational investigation of Rayleigh-Benard flow in the rotating cavities of a core compressor. ASME Paper No. GT2017–64884.Google Scholar

Puttock-Brown, M. R., and Rose, M. G.. 2018. Formation and evolution of Rayleigh-Benard streaks in rotating cavities. ASME Paper No. GT2018–75497.Google Scholar

Richardson, L. F. 1922. Weather Prediction by Numerical Process. Cambridge: Cambridge University Press.Google Scholar

Scobie, J. A., Teuber, R., Sheng, L. Y., Sangan, C. M., Wilson, M., and Lock, G. D.. 2015. Design of an improved turbine rim-seal. ASME. J. Eng. Gas Turbines & Power. 138: 022503.1– 022503.10.Google Scholar

Smout, P. D., Chew, J. W., and Childs, P. R. N.. 2002. ICAS-GT: a european collaborative research programme on internal cooling air systems for gas turbines. ASME Paper No. GT-2002–30479.Google Scholar

Snowsill, G. D., and Young, C.. 2008. Application of CFD to assess the performance of a novel pre-swirl configuration. ASME Paper No. GT2008–50684.CrossRefGoogle Scholar

Soghe, R. D., Bianchini, C., and D’Errico, J.. 2017. Numerical characterization of flow and heat transfer in pre-swirl systems. ASME Paper No. GT2017–64503.Google Scholar

Sultanian, B. K. 2015. Fluid Mechanics: An Intermediate Approach. Boca Raton, FL: Taylor & Francis.CrossRefGoogle Scholar

Sun, Z., Kilfoil, A., Chew, J. W., and Hills, N. J.. 2004. Numerical simulation of natural convection in stationary and rotating cavities. ASME Paper No. GT2004–53528.Google Scholar

Sun, X., Linbald, K., Chew, J. W., and Young, C., 2007. LES and RANS investigations into buoyancy-affected convection in a rotating cavity with a central axial throughflow. ASME J. Eng. Gas Turbines Power. 129(2): 318–325.Google Scholar

Tang, H., Tony, S., and Owen, J. M.. 2015. Use of fin equation to calculate numbers for rotating disks. ASME J. Turbomach. 137(12): 121003.1–121003.10.Google Scholar

Tang, H., and Owen, J. M.. 2017. Effect of buoyancy-induced rotating flow on temperatures of compressor discs. ASME J. Eng. Gas Turbines & Power. 139(06): 062506.1–062506.10.CrossRefGoogle Scholar

Tian, S., Tao, Z., Ding, S., and Xu, G.. 2004. Investigation of flow and heat transfer in a rotating cavity with axial throughflow of cooling air. ASME Paper No. GT2004–53525.Google Scholar

Tian, S., Zhang, Q., and Liu, H.. 2013. CFD investigation of vane nozzle and impeller design for HPT blade cooling air delivery system. ASME Paper No. GT2013–95396.Google Scholar

Wilson, M., Pilbrow, R., and Owen, J.M.. 1997. Flow and heat transfer in a pre-swirl rotor-stator system. ASME J.Turbomach.119: 364–373.Google Scholar

Yan, Y., Gord, M. F., Lock, G. D., Wilson, M., and Owen, J. M.. 2003. Fluid dynamics of a pre-swirl rotor-stator system. ASME J. Turbomach. 125: 641–647.CrossRefGoogle Scholar

Zhu, X., Liu, G., and Liu, S.. 2010. Numerical study on the temperature drop and pressure loss characteristic of pre-swirl system with cover plate. J. Aerospace Power. 25(11): 2489–2506.Google Scholar

Zografos, A. T., Martin, W. A., and Sunderland, J. E.. 1987. Equations of properties as a function of temperature for seven fluids. Computer Methods in Applied Mechanics and Engineering. 61: 177–187.Google Scholar