To evaluate the dosimetric effect of modelling a non-homogeneous couch on patients’ quality assurance (QA) gamma pass rates for intensity-modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) techniques.

A non-homogeneous treatment couch (TxT 550 TTM, CIVCO, USA) was imaged using the LINAC mounted cone-beam computer tomography (CBCT) system. Modelling this couch in different situations, including incomplete (homogeneous model), correct model and not defined situations in the treatment planning system (TPS), was performed based on the geometrical and material densities data extracted from the CBCT images. Calculated gamma pass rates between TPS dose calculations and the measurements in a phantom for different couch models were obtained and compared at two gamma criteria (2%-2 mm and 3%-3 mm).

Comparing TPS calculations for the correct modelled couch and the measurements showed high gamma pass rates for both the IMRT and VMAT techniques (96·5 ±  0·9%, 99·2 ±  0·5% for IMRT in 2%-2 mm and 3%-3 mm criteria; 97·5 ±  0·8%, 99·4 ±  0·5% for VMAT). The overall gamma pass rate of the IMRT plan QAs was reduced by about 2% and 3% on average for incomplete and no couch modelling, respectively. These reductions for VMAT techniques were 2·5% and 4·3%, respectively.

Non-homogeneous couches have different parts with different attenuations, which can be correctly defined using LINAC CBCT. Modelling of treatment couch has a significant effect on patient QA results for VMAT and IMRT plans, especially in radiation fields/subfield transmitting from the couch. We suggest using LINAC CBCTs as an appropriate device for couch modelling in modulated radiotherapy techniques.

The objective of radiotherapy immobilisation devices is to improve the reproducibility of patient positioning during treatment sessions. The inclusion of these devices in the treatment protocol may increase the skin dose. In practice, these devices are not systematically taken into account in the dose calculation.

In this study, the dosimetric effects of the carbon fibre couch iBEAM Evo Extension 415, with and without three different immobilisation devices (a Klarity Breastboard R610-2ECF, a Bionix Butterfly Board and CIVCO Vac-Lok vacuum bag), were calculated and evaluated on the dose calculation for conformal three-dimensional radiation therapy. The measurements were carried out by comparing the measured dose with the one calculated for three different algorithms, FFT convolution, fast superposition and superposition algorithms, which are implemented in Xio treatment planning system (TPS).

Dosimetric tolerance levels have been respected for specific dose calculations, which do not include the fibre couch with or without immobilisation devices. Errors of up to 8% in the dose calculation were obtained for the beams passing through the fibre couch and the breast board base support region.

According to the significant attenuation differences of the beam by the fibre couch and immobilisation devices, it was concluded that ignoring the device in the dose calculation can change patient’s skin and target doses. The fibre couch and immobilisation device should be included within external body contour to account for the TPS calculation algorithms dose attenuation.