Respirable forms of crystalline silica including the mineral cristobalite are known carcinogens and the subject of increasing regulation and codes of good practice. Some bentonites may contain cristobalite, but more commonly they contain opal-CT, or opal-C, which can be confused with cristobalite. In the light of increasing regulation there is a clear need for simple and reliable methods that can distinguish cristobalite from the opals in bentonites and other clay materials. Here we propose the use of a simple NaOH method that is easily applied to bulk samples of bentonites. The method consists of boiling the clay in 0.5 M NaOH for 10 min and measuring the weight of undissolved solid. The method is shown to be accurate for both the identification and quantification of opal in bentonites since these phases are soluble when thus treated. It is also a straightforward method to distinguish the opals from cristobalite as the latter is essentially insoluble. Adoption by industry of a simple operationally-defined method such as this would be preferable to ad hoc reliance on direct instrumental methods alone such as X-ray powder diffraction, as the latter almost always require a large element of judgement and experience on the part of the analyst, although direct methods do need to be used in a supporting role.

Quantification of potentially toxic single mineral phases in natural dusts of heterogeneous composition is critical for health hazard assessment. For example, crystalline silica, a human carcinogen, can be present as respirable particles in volcanic ash such as quartz, cristobalite, or tridymite. A method to rapidly identify the proportions of crystalline silica within mixed dust samples, such as volcanic ash, is therefore required for hazard managers to assess the potential risk of crystalline silica exposure to local populations. Here we present a rapid method for quantifying the proportions of single phases in the mineral assemblage of mixed dusts using X-ray diffraction (XRD) with a fixed curved position-sensitive detector. The method is a modified version of the whole-pattern peak-stripping (PS) method (devised by Cressey and Schofield [Powder Diffr.11, 35–39 (1996)]) using an internal attenuation standard (IAS) but, unlike the PS method, it requires no knowledge of other phases present in the sample. Ten synthetic sample mixtures were prepared from known combinations of four pure phases (cristobalite, hematite, labradorite, and obsidian), chosen to represent problematic constituents of volcanic ash, and analyzed by XRD. Results of the IAS method were directly compared with those of the PS method. The proportions of cristobalite estimated using the methods were comparable and accurate to within 3 wt %. The new IAS method involved less sample preparation and processing and, therefore, was faster than the original PS method. It therefore offers a highly accurate rapid technique for determination of the proportions of individual phases in mixed dusts.