This article focuses on reducing mutual coupling between the ports of dielectric resonator antenna (DRA) using defected ground structures (DGSs). The antenna has the dimension of 50 mm × 50 mm × 8.5 mm. The resonating element in the proposed two-port radiator consists of a cylindrical structure of alumina ceramic (ɛr = 9.8). The rectangular-shaped aperture is utilized to excite both of the resonating elements. The resonating ceramic elements acting as radiators are offset-fed to enhance the antenna’s coupling. Combining interdigital-shaped and semicircular arc-shaped DGSs improves isolation between two resonating elements, embodying the structural novelty. The measured operating frequency range of Port-1 and Port-2 is 5.19–6.7 and 5.15–6.68 GHz, resonating at 5.58 and 5.56 GHz, respectively. The measured mutual coupling between the two ports is −35.5 dB. The measured gain for Port-1 is depicted to be 5.5 dB. The presented multiple-input–multiple-output (MIMO) radiator in this article is an appropriate candidate for WLAN (5.25–5.35, 5.47–5.725, 5.725–5.85, 5.850–5.925 GHz) and WiMAX(5.5 GHz) applications. All the simulated and experimentally observed MIMO parameters of the radiator are discovered to be within optimal bounds.

This work presents a passive intelligent surface designed at 2.45 GHz that has the capability of transmitting and reflecting electromagnetic waves that are incident upon it. The proposed surface does not require any circuitry or power source to function. Therefore, it makes a cost-effective and simple intelligent surface. It is a simple metallic structure that has embedded waveguide slots on its surface, allowing the waves to couple for transmission. A prototype of the proposed surface is designed using an aluminum foil and analyzed for both transmission and reflection of the wave. Further, the designed surface is investigated for tuning the directionality of the radiated field from the antenna. For this purpose, a coplanar patch antenna is first designed and then combined with the surface to tune the directionality of the radiated field of this antenna. The outcome of the measured performance validates that the proposed surface has the potential capability of field reconfiguration in wireless communication for Wi-Fi, WLAN, and Bluetooth applications.

This research investigates the MIMO antenna by using the Theory of Characteristics Mode (TCM) where 10 modes are subjected in designing. Also, 5 modes are the significant mode and 2 modes correspond to non-significant which defines the operating bandwidth and notched bands. The proposed 2 × 2 MIMO antenna configuration is designed for wideband applications with a size of 0.44 × 0.68 mm2. The two isolated 12-sided polygons radiating patches placed adjacent to each other share a common ground which is printed on an FR4 substrate. The measured impedance bandwidth covers bandwidth 3.11–11.98 GHz with two bands rejecting capability: Wireless Local Area Network (WLAN) and Downlink-Uplink Satellite (DUS) system. These two interfering bands are mitigated by etching a C-type slot on the radiating patch and an inverted U-type slot in the microstrip feed. The simulated and measured results are also compared in the far-field region (Normalized Radiation Efficiency (NRE), Peak Gain (PG), and 2-D/3-D radiation pattern). Proposed MIMO antenna also offers good diversity performance with ECC2×2 < 0.00001, DG2×2 > 9.999 dB, TARC2×2 < −15.0 dB, CCL2×2 < 0.001 b/s/Hz and MEG2×2 ≅ −3.0 dB.

A frequency reconfigurable microstrip patch antenna with a combination of an asymmetric armed U-slot and a reversed L-slot etched on a rectangular base patch of 6 GHz resonant frequency designed on an FR4 substrate (ɛr = 4.4) is presented in this paper. Three RF PIN diodes are positioned at inimitable sites of these slots to achieve frequency reconfiguration. A DC bias circuitry, which includes DC blocking capacitors and RF blocking inductors, is integrated with the antenna structure for switching (ON/OFF) the PIN diodes. Six reconfigurable modes with resonant frequencies at 4.33, 4.63, 5.24, 5.87, 5.96, and 6.29 GHz is obtained with different ON-OFF combinations of these PIN diodes. These reconfigurable resonant frequencies cover two continuous bands from 4.21 to 5.43 GHz and 5.69 to 6.6 GHz and is considered to be useful for the applications like aeronautical radio navigation (4.3 GHz), sub-6-GHz 5G (4.4–5 GHz), WLAN (5.2 and 5.8 GHz) and Wi-Fi 6E (5.925–6.425 GHz). Measured gain of the antenna for all the modes varies between 5.86 dBi and 8.72 dBi.

This article presents the design and performance analysis of a printed microstrip ultra-wideband (UWB) antenna consisting of the slots in the ground plane and radiating patch. A meandered S-shaped slot has been introduced on the patch and an inverted U-shaped slot has been incorporated in the ground plane to realize the band-notch effect for WiMAX (3.2–3.8 GHz) and WLAN (5.1–5.8 GHz) bands respectively. The total dimension of the proposed design is 44 × 44 mm2. The fabricated antenna exhibits wide impedance bandwidth of 10 GHz (2.4–12.4 GHz), i.e., 135% of center frequency. The design prototype is fabricated, and the measured results have good agreement with simulated values. The effects of the slots have been analyzed by simulated surface current distribution. The designed antenna shows almost omnidirectional radiation patter and stable gain. The proposed hexagonal antenna may be suitable for UWB applications removing WiMAX and WLAN bands.

To satisfy the increasing requirements of wireless communication, a compact dual band MIMO antenna is presented in this paper. The presented antenna consists of two symmetric radiating elements operating at both 3.5 and 4.5 GHz bands. To enhance the isolation between the two radiating elements, an I-shaped decoupling structure is introduced. The measured −10 dB reflection coefficients frequency bands are 3.3–3.8 and 4.3–5.8 GHz. The measured isolation S21 between the two radiating elements are better than 15 and 17 dB at the lower and higher frequency band, respectively. The overall dimension of the proposed antenna is 50 × 22 × 1.59 mm3. The measured result indicates that the proposed antenna can be a good candidate for 5 G/WLAN wireless communication.

A dual-band 10-port multiple input multiple output (MIMO) antenna array for 5G smartphone is proposed. Each antenna in the MIMO system can work from 3.4 to 3.6 GHz and 5 to 6 GHz with 10 dB (2:1 VSWR) impedance bandwidth. Nevertheless, for a 3:1 VSWR, the antenna operates from 3.3 to 3.8 GHz and 4.67 to 6.24 GHz. The MIMO system is formed by making 10 seven-shaped coupled fed slot antenna elements excited at two different resonant modes and integrated into the system circuit board. By implementing the spatial and polarization diversity techniques, high isolation better than 28 dB between any pair of antenna elements is achieved. The proposed 10-port MIMO antenna array is fabricated and measured. Significant radiation efficiency is obtained, ranging from 65 to 82% for both bands. The antenna gain in the required operating band is substantial, around 3–3.8 dBi. Further, the MIMO parameters such as envelope correlation co-efficient, channel capacity, and total active reflection co-efficient are calculated. The antenna's robustness is estimated by analyzing the user hand effects and specific absorption rate (SAR). The measured results are well agreed with the simulated results.

This study presents a novel configuration of a cuboidal quad-port ultra-wideband multiple-input and multiple-output antenna with WLAN rejection characteristics. The designed antenna consists of four F-shaped elements backed by a partial ground plane. A 50 Ω microstrip line is used to feed the proposed structure. The geometry of the suggested antenna exhibits an overall size of 23 × 23 × 19 mm3, and the antenna produces an operational bandwidth of 7.6 GHz (3.1–10.7 GHz). The notched band characteristic at 5.4 GHz is accomplished by loading a pair of spiral electromagnetic bandgap structures over the ground plane. Besides this, other diversity features such as envelope correlation coefficient, and diversity gain are also evaluated. Furthermore, the proposed antenna system provides an isolation of −15 dB without using any decoupling structure. Therefore, to validate the reported design, a prototype is fabricated and characterized. The overall simulated performance is observed in very close agreement with it's measured counterpart.

In this paper, a tri-band metamaterial (MTM) loaded compact monopole antenna is proposed. In the first step of design procedure, a rectangular monopole antenna is improved by replacing the corresponding rectangular patch with a ring resonator. As a result, the first obtained operating frequency is decreased from 2.95 to 2.46 GHz. Then, this operating frequency is reduced to 2.02 GHz utilizing an MTM geometry in the antenna structure. The geometry parameters of the proposed antenna are optimized to provide the applicability for 3G, WLAN, and WiMAX applications. The impedance bandwidths of 600, 1080, and 220 MHz are obtained at 2.02–2.62, 3.48–4.56, and 5.12–5.34 GHz, respectively. Moreover, the equivalent circuit of the proposed antenna has been extracted. The proposed equivalent circuit model is validated through a comparison with corresponding simulation results. The proposed antenna is compact, low profile, via-less, and provides easy fabrication. Considering the first resonance frequency, a compactness of 32% is achieved in comparison to the corresponding unloaded monopole antenna.

In this paper, a low profile 4 × 4 multiple input and multiple output (MIMO) antenna is proposed and designed for wireless local area network (WLAN) application using a square split-ring resonator. Initially, a single square-patch antenna is designed with square-shaped split-ring slot. Subsequently, the two-element MIMO antenna is designed and it is extended to four-element MIMO antenna. Finally, the defected ground structure (DGS) is implemented in order to enhance antenna performance. The antenna elements are placed opposite to each other. The mutual coupling between the antennas elements is reduced by DGS. The proposed single, two and four-element antennas operate at 5.8 GHz for WLAN. The overall performance is measured in terms of S parameter, radiation pattern, and envelope correlation coefficient. The simulated results are verified through measurements. The simulated and measured results demonstrate that the proposed 4 × 4 MIMO antenna is the most suitable for WLAN applications.

In this research, a compact dual band-notched (DBN) super-wideband (SWB) coplanar waveguide-fed antenna with high bandwidth (BW) dimension ratio of 7427.4 has been presented. The proposed antenna covers a very wide frequency range from 2.8 to 40 GHz (BW ratio of 14.28:1) with |S11|<−10 dB. The overall antenna size is 20 × 14 × 1.6 mm3 which consists of an FR4 substrate with a dielectric constant of 4.4, a shovel-shaped radiating patch and the symmetric stair-shaped ground plane. The DBN characteristics are achieved by employing a pair of C-shaped and circular slots on its shovel-shaped radiating patch to reject the interferences caused by two WiMAX (3.7–4.7 GHz) and WLAN (5.7–6.4 GHz) bands. The notched frequency bands can be controlled by changing the radii of slots. The SWB property of the antenna is obtained by using a symmetric stair-shaped ground plane and also a shovel-shaped radiating patch. The measured results of the fabricated prototype in frequency-and time-domain are also presented and compared with the numerical results. The results indicate that the antenna has good performance over the entire operating BW (173.8%) which makes it very potential candidate for modern SWB applications.

A multi-input multi-output (MIMO) antenna is designed and discussed for multi-band applications. The constituent antennas are composed of four L-shaped elements and a ground plane. When placed beside each other to form a MIMO antenna, a T-bar shaped parasitic structure is also embedded between the antennas on the backside of the substrate to increase the inter-element isolation. The triple-band performance of the antenna is observed at 2.15–2.73 GHz, 3.1–3.9 GHz, and 5.04–6 GHz. The isolation level of more than 20 is seen over the operating frequency range. The fabricated prototype of the MIMO antenna size is very compact (20 × 40 mm), printed on the FR4 substrate. Based on simulation and experimental results, the proposed design is useful for WiMAX and WLAN applications.

In this article, a multiband antenna for various wireless communications is proposed for WWAN, Bluetooth, WiMAX, WLAN, and Downlink satellite system. The antenna consists of a radiating patch and a rectangular ground plane with four L-shaped stubs which are embedded as side arms to obtain a resonating band for WWAN (1.9GHz), Bluetooth (2.4 GHz), WiMAX (2.5, 3.5, and 5.5 GHz), and WLAN (5.5 GHz) wireless systems and a C-shaped stub is etched on the radiating patch to obtain a higher WLAN band (2.4, 5.2, and 5.8 GHz) and a satellite downlink system (7.5 GHz). The proposed antenna exhibits circular polarization at WWAN band and linear polarization for remaining applications. Also, the proposed antenna exhibits an omnidirectional radiation pattern.

In this work, simple, low profile, compact quarter-mode substrate-integrated waveguide (QMSIW)-based antennas are proposed for Wireless Local Area Network (WLAN) at 5.2/5.5 GHz and Wireless Body Area Network (WBAN) at 5.8 GHz, respectively. By implementing QMSIW technique, the electrical size of the antenna is reduced up to 1/4th of the conventional circular SIW cavities. Thanks to the quarter mode concept, the antenna size is reduced significantly by preserving its dominant mode. The resonant frequency of the dominant mode TM010 is independently tuned at 5.2, 5.5, and 5.8 GHz after loading the QMSIW cavity with metalized via holes, subsequently. The on-body performance of the antenna is verified on pork tissues at 5.8 GHz and it is found to be insensitive with respect to surroundings. The measured gain and simulated efficiency of the proposed antenna at 5.8 GHz in free space are 4.8 dBi and 92%, while in the proximity of pork tissues values are 3.25 dBi and 57%, respectively. Moreover, the measurement results demonstrate a good matching with the simulation results.

A compact planar ultra-wideband (UWB) antenna with WiMAX and WLAN notched band is presented in this paper. The presented antenna consists of a rectangular patch and slotted partial ground plane and fed by a microstrip feed line. The volumetric size of the antenna is 30 mm × 22 mm × 1.6 mm. Method of moment-based simulation technology is used to simulate and analyze the characteristics of the antenna. To generate two notch bands at WiMAX and WLAN, a pair of parasitic resonator is placed beneath the radiating patch. The presented antenna achieves an operating band (VSWR ≤2) ranging from 2.98 to 12 GHz with an average gain of 3.95 dBi along with considerable efficiency and symmetric radiation patterns. Moreover, the antenna exhibits two notch bands at 3.5 and 5.45 GHz and is able to avoid possible interference with pre-existing narrow band services. The proposed antenna is low cost and low profile and is modeled to be used as a transceiver in UWB communication applications.

The spectral congestion in existing Industrial, Scientific, and Medical (ISM) Wireless Local Area Network (WLAN) bands has led to the emergence of new ISM bands (Unlicensed National Information Infrastructure (UNII)) from 5.150 to 5.710 GHz. In this paper, a simple uniplanar, high gain, microstrip antenna is designed, fabricated, and tested for existing WLAN and new UNII standards. The proposed antenna provides dualband operation by joining two rectangular rings and cutting Defected Ground Structure in the Coplanar Wave Guide (CPW) feed. The experimental and simulation results show good return loss characteristics and stable radiation pattern over the desired frequency bands ranging from 2.20 to 2.65 GHz (WLAN band) at a lower frequency and from 5.0 to 5.45 GHz (UNII-1/UNII-2 bands). The measured peak gains are 5.5 and 4.9 dBi at 2.45 GHz (WLAN band) and 5.15 GHz (UNII band), respectively.

In this paper, a compact, low-profile, coplanar waveguide-fed metamaterial inspired dual-band microstrip antenna is presented for Wireless Local Area Network (WLAN) application. To achieve the goal a triangular split ring resonator is used along with an open-ended stub. The proposed antenna has a compact size of 20 × 24 mm2 fabricated on an FR-4 epoxy substrate with dielectric constant (εr) 4.4. The antenna provides two distinct bands I from 2.40 to 2.48 GHz and II from 4.7 to 6.04 GHz with reflection coefficient better than −10 dB, covering the entire WLAN (2.4/5.2/5.8 GHz) band spectrum. The performance of the proposed metamaterial inspired antenna is also studied in terms of the radiation pattern, efficiency, and the realized gain. A comparative study is also presented to show the performance of the proposed metamaterial inspired antenna with respect to other conventional antenna structures in terms of overall size, bandwidth, gain, and reflection coefficient. Finally, the antenna is fabricated and tested. The simulated results show good agreement with the measured results.

This paper presents a hexa-band frequency reconfigurable planar antenna, printed on a 1.6 mm thicker FR 4 substrate and backed by a truncated ground plane. The given antenna operates in four different frequency modes, depending on the state of the two lumped element switches. The proposed antenna works at six frequencies, 2.10, 2.40, 3.35, 3.50, 5.28, and 5.97 GHz. These frequency bands are dedicated to useful wireless applications, including 3G Advanced (2.10 GHz), Wireless Fidelity (Wi-Fi) (2.40 GHz), WiMAX (3.35 GHz), WiMAX (3.5 GHz), WLAN (5.28 GHz) and fixed-satellite and mobile satellite services (5.97 GHz). Satisfactory gain of 1.96, 2.20, 2.671, 2.81, 3.80, and 3.88 dBi, efficiency of 92.5, 94.5, 94.56, 95.0, 93.8, and 97.0% and bandwidth of 332, 485, 1020, 1080, 512, and 465 MHz has been obtained at 2.10, 2.40, 3.35, 3.50, 5.28, and 5.97 GHz, respectively. The modeling and simulations are conducted in CST MWS (2014). The simulated reflection coefficient and radiation pattern are validated in antenna measurement facility. In addition, the specific absorption rate of the antenna on a flat section of human body is also studied. The antenna is compact, low profile, and vastly suitable for multi-band wireless devices.

In this paper, a compact tri-band asymmetric coplanar strip (ACS)-fed meander-line antenna for wireless communications is proposed. Two inverted-L-shaped resonators are added to a simple meandered radiator for standard tri-band operation. Parametric studies indicate that operating frequencies of the proposed antenna are determined by the dimensions of the two inverted-L-shaped resonators. The measured results show that the proposed antenna can achieve three frequency bands; i.e. 1.48–1.63, 2.25–2.48, and 4.22–6.0 GHz. These bands can successfully cover the global positioning system L1, wireless local area network (WLAN), and HIPERLAN/2 operation bands, respectively. The proposed antenna exhibits good radiation patterns with reasonable gain and high radiation efficiency across the operating bands. In addition, the proposed antenna has compact size and simple feeding scheme, which make it suitable to be integrated within the portable device for wireless communications.

The proposed research paper presents the design, development, and experimental testing of a broadband stacked complementary microstrip antenna for ultra-wideband (UWB) (5.28–5.85 GHz), Unlicensed National Information Infrastructure band (UNII) (5.25–5.825 GHz), wireless local area networks (WLAN, IEEE802.11a, 5.15–5.35 GHz), and IEEE 802.11b (5.75–5.85 GHz), Worldwide Interoperability for Microwave Access band (5.25–5.85 GHz), and Radio Astronomy band (6.6–6.75 GHz) wireless applications. The main aim of this paper is to obtain an UWB behavior from the combined effect of two resonances exhibited by the driven and parasitic patches of a stacked complementary antenna geometry. Circularly polarized radiations are also emitted by the antenna by the addition of an orthogonal stub to its feed line. The proposed three-layered antenna structure (without air gap) is fabricated on commercially available glass-reinforced epoxy laminate, FR4 substrate. The topmost layer of FR4 has a square-shaped patch parasitic patch printed over it; this patch has a square slot etched out from it. The middle layer of the antenna has a square-shaped driven patch of approximately the same dimensions as that of the slot in parasitic patch. The antenna is fed using aperture-coupled feeding mechanism. Therefore the lowermost layer of FR4 has a ground plane on its top with a “π”-shaped slot etched from it and a feed line with an orthogonal stub at its bottom forming a “T”-shaped geometry. The antenna is fed by the electromagnetic coupling between the antenna layers .The proposed antenna has a compact structure with overall volumetric dimensions of 4.7 × 3.82 × 0.483 cm3. The antenna design and simulations are carried out using CSTMWSV'10 with perfect boundary (electric and magnetic) estimations. This designed antenna shows an UWB behavior from 5.14 to 5.85 GHz with an impedance bandwidth of 710 MHZ and a fractional bandwidth of 12.62% at the center frequency of band at 5.5 GHz. The radiating antenna also possesses a good gain of 4.59 dBi at the central frequency of 5.50 GHz and a 1 dB axial ratio bandwidth of 820 MHz from 5.16 to 5.98 GHz. The validation of results is done by fabrication and experimental testing of the antenna using a vector network analyzer and placing the antenna in an anechoic chamber for gain measurements. The measured results show close matching with the simulated ones and this makes the antenna well suited for the proposed wireless applications of interest, specifically in small handheld wireless communication devices.