This paper presents a review of the recent advances in the field of substrate integrated waveguide (SIW) filters, with particular emphasis on the techniques adopted to increase the out-of-band rejection of the filters and on the miniaturization strategies. After an overview of classical approaches to introduce transmission zeros in SIW filters, a number of recently introduced techniques are presented. In particular, the use of specially implemented extracted-poles topologies and of pre-filters is described, discussed, and compared. For each of these techniques, numerical and experimental results are reported for validation.

In this work, a new structure for the implementation of inline pseudoelliptic waveguide filters using non-resonating modes, based on asymmetric iris coupled transverse rectangular ridge resonators has been proposed. The basic structure is comprised of a ridge that is always centered and transverse to the waveguide center axis and has the ability to create a transmission zero (TZ) above or below the passband without involving any rotation of the ridge, thus enabling quicker design of the resulting filters by allowing the use of more efficient analysis tools like FEST3D, in addition to the more general purpose methods like HFSS. A centered ridge enables the ease of manufacturing through machining. The proposed structure makes use of rectangular waveguide's dominant TE10 mode as a non-resonating mode to create an alternate energy path from source to load, thus realizing a TZ, while the asymmetric irises excite the ridge resonator, enabling the overall structure to act as a singlet capable of producing both a pole and a TZ. A third-order filter with one TZ and a fifth-order filter with two TZs have been designed and manufactured. Measured results show good consistency with the simulated data, validating the viability of the proposed structure.

In this paper, dual-band and tri-band bandpass filters (BPFs) with fully independent and controllable passbands based on multipath-embedded resonators are presented. The dual-band BPF consists of two double open-ended stub-loaded terminal-shorted resonators (DOESL-TSRs) with a common via-hole connected along the symmetric plane of the filter. Based on DOESL-TSRs, a triple open-ended stub-loaded terminal-shorted resonator (TOESL-TSR) is proposed in the design of tri-band BPFs. The resonant characteristics of DOESL-TSR/TOESL-TSR are analyzed by the numerical calculation method. The measured results of the dual-band BPF show that the center frequencies (CFs) are located at 2.595 and 5.75 GHz, respectively, with 3 dB fraction bandwidth (FBWs) of 15 and 12.8%. The measured CFs of the tri-band BPF are located at 2.545, 3.775, and 5.95 GHz, respectively, with 3 dB FBWs of 9.8, 9.3, and 5.5%. Both of the filters exhibit the merits of fully independent and controllable passbands, high selectivity, and compact size.

In this paper, a tri-band bandpass filter (BPF) using asymmetric stub-loaded stepped-impedance resonator (SL-SIR) is presented. The asymmetric characteristic of SL-SIR broadens degrees of freedom for three controllable modes design. Also, the coupling coefficients (Mij) and the external quality factors (Qei) at each passband of the filter can be independently adjusted by the proposed mixed-type feedline structure. Besides, multi-transmission zeros are produced to improve the isolation and selectivity of the passbands. Finally, a tri-band BPF is operated at 1.9 GHz (time division long term evolution – TD-LTE band), 3.2 GHz (worldwide interoperability for microwave access – WiMAX band), and 5.8 GHz (wireless local area networks – WLAN band) and their insertion loss are 1.03, 0.94, and 1.27 dB, respectively. The measured results of the fabricated tri-band BPF exhibit good agreement with simulated results.

A new quad-band bandpass filter for Global System for Mobile Communications, Wireless Local Area Network, and Worldwide Interoperability for Microwave Access is designed and fabricated using the stub-loaded resonator (SLR) technology without complex fabrication process, such as via-hole or multi-layer substrate. Owing to the embedded SLR, the proposed quad-mode resonator is compact. Equivalent circuits of the proposed quad-mode resonator are analyzed in detail, and high design freedom is shown because of shifting the passband frequencies individually. Good passband selectivity and isolation of the each passband at 1.8, 2.4, 3.5, and 5.2 GHz can be well achieved due to the transmission zeros appeared near the each passband edges. Experimental results show good agreement with the simulated results.