This study aimed to determine the load-bearing capacity of trotting Yonaguni ponies using gait analysis. The Yonaguni pony is one of the Japanese landrace horses, and has normal gait characteristics when trotting. As a breed they are small in stature and hence susceptible to the effect of the rider's weight. It is therefore important to determine their load-bearing capacity as regards to their welfare. Ten Yonaguni ponies with a (mean ± SD) height at withers of 122 (± 2.9) cm had a marker attached to their chests, and their unridden gait was recorded using two high-resolution hybrid cameras while they trotted along a short (40 m), straight course. In total, nine tests were performed for each horse: the first with a 0-kg load; seven with randomly loaded weights weighing 10-70 kg; and then a final test again with a 0-kg load. Three-dimensional movement of the marker was analysed using a motion capture system. The time series of vertical displacement of the marker underwent spectrum analysis, and the autocorrelation coefficient was calculated. The first two peaks of the autocorrelation were defined as symmetry and gait regularity, and their sum was defined as stability. Symmetry (no unit) in the 70-kg test (0.53) was lower than that in the first 0-kg test (0.68), and stability (no unit) in the 70-kg test (1.16) was lower than that in the first 0-kg test (1.41). We concluded that the maximum permissible load for a trotting Yonaguni pony is < 70 kg, which represents 33% of its bodyweight. To promote welfare, it is important to determine the load-bearing capacity for individual types of horse.

As the development of the pulsed power technology, high voltage pulse transformer (HVPT) is usually used instead of Marx generator as a charging device for the pulse forming line (PFL) of intense electron-beam accelerator (IEBA), and which make the IEBA compact. However, during the operation of the IEBA, the HVPT may be destroyed for the failure of electrical insulation and the over-voltage. So in this paper, the output voltage characteristics of IEBA, characteristics of the voltage at the output terminal of HVPT at four kinds of load conditions are analyzed, including load matching, load short, load open, and surface flashover in the vacuum chamber. It is found that load short, load open, and surface flashover in vacuum chamber will affect the voltage at the output terminal of HVPT, and an oscillation wave could be formed, which affect the electrical insulation of HVPT and decrease the lifetime of HVPT. Meanwhile, the waveform of the load voltage is also modified, especially at the conditions of load open and surface flashover in vacuum chamber. When the load is open, the amplitude of the output main pulse of IEBA is twice the charging voltage of BPFL. However, the amplitude of the output pulse of IEBA is modified by the voltage at the output terminal of HVPT, and the resistance of main switch channel has a great effect on the amplitude of the load voltage. When surface flashover occurs in the vacuum chamber, the pulse duration of the output voltage will be decreased. So, during the operation of IEBA, load short, load open and surface flashover in vacuum chamber should be avoided.

The object of this paper is to study the actual waiting time of a customer in a GI/G/1 queue. This is an important criterion from the viewpoint of both the customers and the efficient functioning of the counter. Suitable point processes in the product space of load and time parameters for any general inter-arrival and service time distributions are defined and integral equations governing the correlation functions are set up. Solutions of these equations are obtained and with the help of these, explicit expressions for the first two moments of the number of customers who have waited for a time longer than w in a given time interval (0, T) are calculated.