This paper presents the design, manufacturing, and measurement of a novel substrate integrated waveguide (SIW) pedestal filtering antenna solution for use in 5G New Radio sub-6 GHz communications. Miniaturization is achieved through the use of SIW pedestal resonators and integration of the radiating element into the filter design, resulting in higher order suppression. The design generates a third order filtering response utilizing SIW pedestal resonators and a patch antenna element. The manufactured SIW pedestal filtenna achieves a 10 dB return loss bandwidth of 4.29% about a center frequency of 3.63 GHz, and a boresight gain of 3.66 dBi. Using the SIW pedestal filtenna elements, two array configurations are measured, a 1 × 1 linear array and 2 × 2 planar array. Beam-steering capability for the linear array is demonstrated in simulation, while the 2 × 2 array is shown to be suited to both dual- and single-mode operation.

One of the current trends in the integrated circuit (IC) development is the integration of antennas on-chip or in the package of the IC. This poses challenges in the production testing process of the packaged IC, as the antenna functionality has to be included and at least one of the signal ports cannot be accessed at a conducted manner. In order to measure the reflection coefficient of an integrated antenna, a contactless characterization method (CCM) can be used. In this paper, the practicality of a CCM is assessed, having the application of a cost-effective high-volume testing procedure for integrated antennas in mind. It is shown that the CCM yields accurate results for different imperfections in the measurement setup. Moreover, measurement results around 33 GHz using a connectorized patch antenna are shown, which experimentally verify the validity of using the CCM under near-field conditions.

In this paper, we propose a novel integrated ultra-wideband (UWB) monopole antenna with dual-band antenna. The antenna consists of planar rectangular with semi-elliptical base and a rectangular dielectric resonator antenna (DRA) with dual-band operation. Both of them are excited via coplanar waveguide (CPW) lines. The experimental measurements show that the planar monopole provides an impedance bandwidth between 2.44 and 11.9 GHz which largely covers the entire UWB spectrum, and the rectangular DRA operates at two bands; 5.3–6.2 and 8.5–9.4 GHz. Additionally, the proposed structure ensures low mutual coupling between the two ports (with S21 less than −20 dB in the whole operating frequency band). The measured and numerical results show a good agreement.

This paper presents two feeding techniques for the radiation characterization of integrated antennas at millimeter-wave frequencies. The first method involves feeding the antenna-under-test (AUT) with a radiofrequency (RF) probe. We compare the measurements obtained with a standard RF probe, an extended probe, and an extended probe with reversed connector orientation. We find that the reversed orientation probe produces the best results in terms of effective measurement angular sector and reduction of ripples due to diffraction. The second method involves feeding the AUT through a flexible transmission line. This method achieves a larger range of measurement angles, but still suffers from parasitic scattering likely due to the mounting bracket and still need further development.

This paper provides an overview of the research carried on in the EASY-A project concerning the design of antennas for different applications in the unlicensed band around 60 GHz, and their integration into compact RF front-ends. Different antenna configurations, in conventional microwave substrate and low-temperature co-fired ceramics (LTCC), were studied and fabricated. The results comply with the requirements established for various scenarios.