The paper presents the results of a study on propagation and focusing of high-intensity pulsed ion beams, produced by a self-magnetically insulated diode of semi-cylindrical geometry at the TEMP-6 accelerator (120 ns, 200–250 kV). We examined the space-charge neutralization of the beam, the energy density in the focus, the divergence of the beam, and its shot-to-shot displacement in the focal plane. It is found that the concentration of low-energy electrons in the beam is 1.3–1.5 times higher than the concentration of ions. We observed additional ion focusing by its own space charge. With an increase in the density of the net negative (electrons and ions) charge of the beam from 3.6 to 9 µC/cm2, the total divergence (the sum of the beam divergence in the vertical and horizontal planes) decreases from 11.4 to 4.5°. It leads to an increase in the energy density in the focus from 4 up to 10–12 J/cm2. To increase the electrons concentration in the beam, a metal grid installed in the ion beam transport region was used.

Krypton Large Impulse Thruster (KLIMT) project was aimed at incremental development and optimization of a 0.5 kW-class plasma Hall Effect Thruster in which, as a propellant, krypton could be used. The final thermally stable version of the thruster (the third one) was tested in the Plasma Propulsion Satellites (PlaNS) laboratory in the Institute of Plasma Physics and Laser Microfusion (IPPLM) in Warsaw as well as in the European Space Agency (ESA) propulsion laboratory in the European Space Research and Technology Centre (ESTEC).

During final measurement campaign, a wide spectrum of parameters was tested. The plasma potential, electron temperature, electron concentration, and electron energy probability function in the far-field plume of the thruster were measured with a single cylindrical Langmuir probe. Faraday probes were used for recording local values of ion current. Using several collectors in different locations and moving them on the surface of a sphere, the angular distribution of the expelled particles was reconstructed which was a local measure of beam divergence. Angular distribution of ion flux as measured with a central Faraday probe was parameterized with krypton mass flow rate, voltage, coil current ratio, and the cathode mass flow rate. Beam divergence measurements with Faraday probes as well as plasma parameters derived from Langmuir probe seem to be consistent with our understanding of the operating envelope. Obtained results will serve as a baseline in the design of plasma beam structure diagnostics system for the PlaNS laboratory.