Single photon sources

Sources of coherent electromagnetic radiation across the entire spectrum, from a classical microwave antenna to an optical laser, have the common property of a high intensity. This translates to the light being made of a large number of photons, fundamental energy packets of light waves that arise in the quantum theory of electromagnetic radiation. Attenuating a laser beam can lead to a low intensity and hence a small photon number, but a truly non-classical source with deterministic single photon emission can lead to revolutionary applications in quantum communications and quantum computing.Reference Altewischer, Van Exter and Woerdman^8–Reference Lounis and Orrit¹¹

Spontaneous emission lies at the heart of all light-emitting devices, including light-emitting diodes and lasers as well as single photon sources. Instead of a large collection of emitters, as in the gain medium of a laser, isolated emitters lead to single photon emission, but the efficiency is often low for practical applications. The key to achieving efficient and deterministic single photon emission is to enhance spontaneous emission through the Purcell effect. This effect is achieved by engineering the environment surrounding the emitter since spontaneous emission, as given by Fermi’s golden rule, depends on the number of decay routes available to the emitter. By placing quantum dots inside a cavity, the density of modes is enhanced at resonance, and reliable single photon sources have been achieved.Reference Grangier, Sanders and Vuckovic¹² The nature of this cavity-based approach places stringent restrictions on the line width of the quantum dot, achievable only at low temperatures (below 5 K), which limits the applicability of this approach.

Recently, interest has shifted toward coupling isolated emitters to plasmonic nanostructures.Reference Akimov, Mukherjee, Yu, Chang, Zibrov, Hemmer, Park and Lukin² The ability to confine plasmons down to the nanoscale also increases the interaction with the tiny isolated light emitters causing preferential and exclusive coupling of spontaneously emitted photons to plasmonic modes instead of propagating modes in vacuum. A major advantage of plasmonic approaches for enhancing single photon emission is their broad bandwidth. The fundamental plasmonic mode of a metal nanowire occurs for a broad range of frequencies, enabling coupling to single photons even at room temperature. Such broadband coupling is absolutely essential for emitters such as nitrogen vacancy (NV) centers in diamond, which have a broad bandwidth of emissionReference Babinec, Hausmann, Khan, Zhang, Maze, Hemmer and Loncar¹³ (Figure 1a).

Figure 1. Plasmons generated using non-classical light. (a) Broadband coupling of an isolated quantum emitter to a plasmon on a metal nanowire. The low mode volume leads to preferential coupling of spontaneously emitted single photons to plasmons on the nanowire.Reference Akimov, Mukherjee, Yu, Chang, Zibrov, Hemmer, Park and Lukin² (b) Conventional enhanced transmission experiment through metallic nanohole arrays repeated with entangled photons showed that entanglement is preserved by excited surface plasmons.Reference Altewischer, Van Exter and Woerdman⁸ (c) Entanglement between qubits mediated by V-groove plasmon waveguides.Reference Gonzalez-Tudela, Martin-Cano, Moreno, Martin-Moreno, Tejedor and García-Vidal⁹ (d) Long range surface plasmon polaritons (LRSPP) of a gold metal stripe excited using “squeezed” vacuum. The outcoupled photons preserve the non-classical properties present in the light used to excite the LRSPP.Reference Huck, Smolka, Lodahl, Sorensen, Boltasseva, Janousek and Andersen¹⁰d _sep, separation of the two quantum emitters; h, the distance of the quantum emitter from the nanogroove; λ, the wavelength of light used in the experiment.

NV centers in diamond have emerged as a natural choice for the solid-state quantum bit (qubit), not only because of their single photon emission, but also because of their spin coherence properties.Reference Aharonovich, Greentree and Prawer¹⁴ This is important in the field of quantum computing since the fundamental issue prohibiting the storage and retrieval of quantum bits is the decoherence (loss of information) caused by the environment. This unique platform that allows communication and computation using qubits of a different nature (spin and light) can lead to scalability of qubits for practical quantum computing. The ability to make these two degrees of freedom interact rests on the availability of single photons from NV centers beyond that available in bulk diamond.Reference Choy, Hausmann, Babinec, Bulu, Khan, Maletinsky, Yacoby and Lončar¹⁵ Conventional cavity-based approaches are not suited to these emitters with a broad bandwidth therefore low mode volume plasmons form a viable route to enhance spontaneous emission.Reference Huck, Kumar, Shakoor and Andersen¹⁶ Thus nanoplasmonic networks could assist in overcoming one of the main challenges in the field of quantum computing: scalability of qubits.

Quantum information transfer

The concept of a quantum bit is central to quantum computing and communication and rests on the fact that information encoded into quantum degrees of freedom show behavior distinct from the simple 1s and 0s of classical bits. For example, a quantum bit can exist in superposed states of 1 and 0 at the same time and collapses to either one only when measured. A question that naturally arises before one can choose the plasmon polariton for quantum applications is whether it can preserve non-classical information. Electrons in the solid comprising the plasmon inevitably undergo millions of collisions with ions that could lead to decoherence and loss of quantum information. Surprisingly, plasmon polaritons not only preserve the quantum properties of light used to generate them but also allow the reliable recovery of this non-classical information once the plasmon is scattered back into propagating photons.

Experiments have demonstrated that plasmons have the same exotic properties of photons such as entanglementReference Fasel, Robin, Moreno, Erni, Gisin and Zbinden¹⁷ and squeezing,Reference Huck, Smolka, Lodahl, Sorensen, Boltasseva, Janousek and Andersen¹⁰ which have no classical analogue.Reference Gerry, Knight and Beck¹⁸ Entangled photon pairs have a correlated quantum identity and are represented by a single wave function even when the physical separation between them is large. The conventional nanohole array experiment repeated with entangled photons has shown that the transmission on the output side, enhanced by a surface plasmon mechanism, also shows the same entanglement.Reference Altewischer, Van Exter and Woerdman^8, Reference Moreno, García-Vidal, Erni, Cirac and Martín-Moreno¹⁹ This directly implies that the surface plasmons on the nanohole array can demonstrate non-local entanglement behavior of photons (Figure 1b). Recently, it was also proposed that one-dimensional plasmonic nano-waveguides can act as a mediator of entanglement between qubits (Figure 1c).

Another experiment showed that long range plasmon polaritons of a gold metal stripe can be excited using “squeezed vacuum,” a non-classical state of light consisting of just quantum noise. Careful mapping of the quantum state of the outcoupled light showed conclusive evidence that the plasmon polariton itself must have retained the “squeezed vacuum” properties (Figure 1d). Furthermore, a single quantum of the plasmon oscillation on a metal nanowire was excited using a single photon from an isolated quantum dot and a diamond NV center in separate experiments (Figure 1a). This was verified using the anti-bunching photon statisticsReference Akimov, Mukherjee, Yu, Chang, Zibrov, Hemmer, Park and Lukin² (proof that only one photon is emitted a time) and wave-particle dualityReference Kolesov, Grotz, Balasubramanian, Stöhr, Nicolet, Hemmer, Jelezko and Wrachtrup²⁰ from the outcoupled light.

For quantum information networks, switching and routing of single photons would be a necessary component. But light interacts well with itself only when assisted by nonlinearities. The low intensity of single photons makes this nonlinear interaction very weak, but efforts have also been focused on using nanowire plasmon-polariton-mediated single photon routing.Reference Chang, Sorensen, Demler and Lukin²¹ With the multitude of recent developments in quantum properties, the plasmon polariton is set to play a significant role in future nanoscale quantum circuits as a carrier of non-classical information.

Coherent sources

Another research direction dealing with quantum properties of localized plasmons is related to the SPASER (surface plasmon amplification by stimulated emission of radiation), a device for coherent generation and amplification of surface plasmons.Reference Bergman and Stockman^22, Reference Noginov, Zhu, Belgrave, Bakker, Shalaev, Narimanov, Stout, Herz, Suteewong and Wiesner²³ The nanoscale plasmon mode volumes cause coupling of a large collection of emitters to a single plasmonic mode, overcoming the detrimental effects of absorption of light in the metal. This nano-equivalent of the laser is expected to usher in a number of applications using a coherent amplified surface plasmon field (see the Khurgin and Boltasseva article in this issue).

Hyperbolic metamaterials

For waves in an isotropic medium, the spherical dispersion relation constrains the allowed wave vectors to lie on a sphere. Metal-dielectric composites can achieve an extreme anisotropy not available in nature at visible frequencies such that the dielectric constant in one direction becomes negative (reflective/metallic) but stays positive (transparent/dielectric) in the perpendicular direction. This control arises due to the ability to nanostructure the metal inclusions (negative dielectric constant) in a dielectric host medium (positive dielectric constant). Such a uniaxial medium can be described by a dielectric tensor ( with ) where the dielectric components are defined along the respective principal axes. This medium allows propagating solutions to Maxwell’s equations unlike a metal. For extraordinary waves (similar to transverse magnetic polarized) inside such a medium the dispersion relation takes the form

(2)

where and . The wave vector of light is resolved along the principal axes and k ₀ = ω/c where ω is the frequency and c is the speed of light in vacuum. The extreme anisotropy leads to hyperbolic isofrequency surfaces since . This class of optical metamaterials, known as hyperbolic metamaterials (HMM),Reference Smith, Kolinko and Schurig^29, Reference Podolskiy and Narimanov³⁰ is among the most promising for practical applications due to their high figure of merit, ease of nanofabrication, bulk three-dimensional non-resonant response, deeply subwavelength unit cells, and tunability across the visible and mid-infrared spectrum.Reference Noginov, Barnakov, Zhu, Tumkur, Li and Narimanov^31–Reference Hoffman, Alekseyev, Howard, Franz, Wasserman, Podolskiy, Narimanov, Sivco and Gmachl³³ Two forms of the hyperboloid are possible depending on the number of negative components of the dielectric tensor. We have Type I (ε_xx = ε_yy > 0 while ε_zz < 0) or Type II (ε_xx = ε_yy < 0 and ε_zz > 0) hyperbolic metamaterials.

The most striking feature of the hyperbolic metamaterials is that they allow waves with unbounded wave vectors. In vacuum, these large wave vector waves (high-k waves) are evanescent and simply decay away (Figure 2). This property has led to many device applications from subdiffraction imaging in the hyperlensReference Jacob, Alekseyev and Narimanov^34, Reference Liu, Lee, Xiong, Sun and Zhang³⁵ to subwavelength mode confinement in metamaterial photonic funnels.Reference Govyadinov and Podolskiy³⁶

Figure 2. Dispersion curves at constant frequency. The isofrequency curve for (a) an isotropic dielectric is a sphere and (b) extraordinary waves in a uniaxial medium with extreme anisotropy ε_xx = ε_yy > 0 and ε_zz < 0 is a hyperboloid (Type I metamaterial). (c) Hyperboloid of Type II metamaterial when two components of the dielectric tensor are negative (ε_xx = ε_yy < 0 and ε_zz > 0). The metamaterials in (b) and (c) can support waves with unbounded wave vectors (dashed red arrows), which are evanescent and simply decay away in any isotropic medium. These high-k states contribute to the photonic density of states causing a divergence in the effective medium limit. k_x, k_y, and k_z, components of the wave vector tensor along the x, y, and z axes, respectively; ε_xx, ε_yy, and ε_zz, components of the dielectric tensors along the x, y, and z axes, respectively; k _min, the wave vector below which waves do not propagate in the Type II metamaterial.

Singularity in the photonic density of states

Recently it was pointed out that hyperbolic metamaterials support a broadband singularity in the photonic density of states (PDOS), the physical quantity governing quantum optical phenomena.Reference Jacob, Smolyaninov and Narimanov^6, Reference Jacob³⁷ This was later confirmed experimentallyReference Jacob, Kim, Naik, Boltasseva, Narimanov and Shalaev^5, Reference Noginov, Li, Barnakov, Dryden, Nataraj, Zhu, Bonner, Mayy, Jacob and Narimanov³⁸ paving the route for controlling spontaneous emission and related phenomena using metamaterials. The PDOS, like its electronic counterpart, can be understood intuitively by calculating the volume enclosed between the isofrequency contours at ω(k) and ω(k) + ∆ω where Δω is a small increase in frequency. For an isotropic medium, this is the volume of an infinitesimally thin spherical shell. In stark contrast, for the HMM, we get a hyperboloidal shell that has infinite volume in the effective medium limit, leading to a singularity in the density of states. The divergence occurs because the metamaterial supports a large number of electromagnetic states (high-k modes) with unbounded wave vectors in the effective medium limit.

The peculiar property, which sets it apart from conventional approaches to PDOS engineering such as optical microcavities and slow light waveguides,Reference Yao, Van Vlack, Reza, Patterson, Dignam and Hughes³⁹ is the broad bandwidth in which the PDOS is enhanced. A direct consequence of this is the broadband Purcell effect, which can enhance the spontaneous emission from quantum emitters. Thus hyperbolic metamaterials would be excellent candidates to enhance the broadband emission from NV centers in diamond.

There are two approaches to achieving the extreme anisotropy required for hyperbolic isofrequency curves: metal-dielectric composites in either a multilayered structure or a periodic array of nanowires in a dielectric host with a subwavelength unit cell size (a << λ). Effective medium theory predicts that both these structures achieve a uniaxial dielectric response with required anisotropy (Figure 3b–c).Reference Milton⁴⁰ The physical origin of the large number of high-k modes are the coupled plasmonic Bloch modes of the nanowire array or multilayer structure.Reference Elser, Podolskiy, Salakhutdinov and Avrutsky⁴¹ This clearly places an upper cut off to the highest allowable wave vector given by the inverse of the unit cell size (). But with current fabrication techniques that can achieve continuous 10 nm thin films of metal and dielectric, or 40 nm diameter metal nanorods, can be easily achieved for visible light, where k ₀ is the free space wave vector. Decreasing the unit cell size further leads to issues due to the higher absorption in nanostructured metal.

Figure 3. A materials perspective of hyperbolic media. (a) Hyperbolic metamaterials (HMM) can be made using plasmonic materials tailored to different wavelength regions from the visible to mid-infrared ranges. (b) Multilayer realization consists of alternating subwavelength layers of metal and dielectric. (c) HMM based on metal nanorods in a dielectric host. Multiple experiments have probed the spontaneous emission from dye molecules near these metamaterials.Reference Jacob, Kim, Naik, Boltasseva, Narimanov and Shalaev^5, Reference Noginov, Li, Barnakov, Dryden, Nataraj, Zhu, Bonner, Mayy, Jacob and Narimanov³⁸ This has become an exciting area of research of quantum nanophotonics using hyperbolic metamaterials.Reference Cortes, Newman, Molesky and Jacob⁴⁴ UV, ultraviolet; IR, infrared.

The hyperbolic response of the two structures in the previous section occurs in a broad bandwidth with very low loss as compared to other optical metamaterials. Furthermore, the response can be tuned from the ultraviolet (UV) to mid-infrared (mid-IR) wavelength ranges using an appropriate plasmonic metal. At UV and visible wavelengths, silver and gold form the obvious choice for the metal, but the situation is different at larger wavelengths. The transmission of light through the metamaterials is an important factor for which impedance matching has to be achieved. The large negative real part of conventional plasmonic metals limits their usefulness for hyperbolic metamaterials at near-IR and mid-IR wavelength ranges. Alternate plasmonic materialsReference Naik, Kim and Boltasseva⁴² (transparent conducting oxides and transition metal nitrides) in the near-IR and doped semiconductors (III–V) in the mid-IR have emerged as the best candidates for hyperbolic metamaterials. It also has to be noted that the highest possible index for the dielectric leads to the best tunability, broad bandwidth, and impedance matching. A summary of possible materials for HMMs are shown in Figure 3a.

The near-field thermal and spontaneous emission properties of such metamaterials are modified due to the presence of unique high-k modes. This is best understood by analyzing the near-field local density of states (LDOS).Reference Novotny and Hecht⁴³ In Figure 4, we plot the wave vector-resolved local density of states (WLDOS) for a multilayer structure consisting of 16 layers of silver (Ag) and alumina (Al₂O₃). The WLDOS shows the contribution of various modes (specified by their lateral wave vector at a given wavelength) to the local density of states (LDOS) in the near-field of the metamaterial. A bright band denotes a set of states with specified frequency and wave vector that couple efficiently to an isolated emitter. It is seen that this practical realization of the hyperbolic metamaterial supports high-k states (coupled plasmonic Bloch modes) in a broad bandwidth, in agreement with effective medium theory. Spontaneous emission properties of R6G dye molecules have been experimentally studied using both nanowireReference Noginov, Li, Barnakov, Dryden, Nataraj, Zhu, Bonner, Mayy, Jacob and Narimanov³⁸ and multilayerReference Jacob, Kim, Naik, Boltasseva, Narimanov and Shalaev⁵ HMM (Figure 3b–c). A significant decrease of lifetime of the dye molecules was observed particularly for the low loss nanowire realization. Future work will address key challenges of enhancing the transmission to study non-classical light interaction with metamaterials.

Figure 4. Wave vector-resolved local density of states (WLDOS) in the near-field of a hyperbolic metamaterial (HMM) calculated for an effective medium slab and practical multilayer realization taking all non-idealities into account.Reference Cortes, Newman, Molesky and Jacob⁴⁴ The color bar is in a logarithmic scale normalized to the photonic density of states of vacuum. (a) Effective medium theory (EMT) predicts the existence of a large number of high-k states in a broad bandwidth. (b) Result for a 16 layer Ag/Al₂O₃, 15 nm/15 nm practical system, which achieves the same response predicted by EMT. For large wave vectors, the WLDOS is different since the enhancement in the density of states is curtailed by the finite unit cell size. k_x, the lateral wave vector along the planar interface of the metamaterial; k ₀, the free space wave vector.

Optical phase diagram

In Figure 5, we plot the optical phase diagram for a metal-dielectric (Ag/TiO₂) multilayer structure as predicted by effective medium theory for different fill fractions of the metal at UV and visible wavelengths.Reference Cortes, Newman, Molesky and Jacob⁴⁴ EMT predicts this metal-dielectric composite to have a rich variation of dielectric constants behaving as an effectively anisotropic dielectric, a metal, a Type I HMM, or a Type II HMM. The central meeting point of the optical phases at a fill fraction of 0.5 and wavelength of around 510 nm corresponds to the bulk metamaterial plasmon resonance of the metal-dielectric composite, where the effective components reach a singular limit of ε_xx → 0 and |ε_zz| → ∞.

Figure 5. Optical phase diagram. Effective medium theory predicts a multilayer structure consisting of nanolayers of Ag and TiO₂ to behave as an effective dielectric, metal, Type I hyperbolic metamaterials (HMM), or Type II HMM, depending on the wavelength and fill fraction of the metal. The most interesting feature occurs along the phase boundaries, where the topology of the isofrequency surface can change from an ellipsoid to a hyperboloid, leading to a sudden increase in light-matter interaction.Reference Krishnamoorthy, Jacob, Narimanov, Kretzschmar and Menon⁷ The red dashed arrows are the light wave vectors.

Topological transitions

The most interesting phenomenon occurs at the phase boundaries where the wavelength dispersion of the metal causes the metamaterial structure to change from an effective dielectric to a HMM (Figure 5). The isofrequency surface therefore changes from an ellipsoid to a hyperboloid at the transition wavelength. The role of the isofrequency surface in optics is analogous to the Fermi surface in electronics and, not surprisingly, such changes in topology of the Fermi surface (known as Lifshitz transitions) occur in electronic systems with dramatic consequences on electron transport properties.Reference Lifshitz⁴⁵ In the optical equivalent, the transition is characterized by the sudden appearance of the high-k states, since the closed ellipsoidal isofrequency surface does not support these modes. Such topological transitions in the optical isofrequency surface lead to increased light matter-interaction beyond the transition wavelength. They were studied using the lifetime of broadband quantum emitters placed in the vicinity of a multilayer HMM. The sample was carefully designed to have a ε_xx ≈ 0 transition within the bandwidth of the dye,Reference Krishnamoorthy, Jacob, Narimanov, Kretzschmar and Menon⁷ and a decrease in lifetime was observed beyond the transition wavelength. This unique metamaterial effect should lead to applications in controllable switching of light-matter interaction.