Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-22T14:22:18.635Z Has data issue: false hasContentIssue false
  • English
  • Français

DESIGN MODIFICATION OF AN INNOVATIVE SPLIT-SINGLE TWO-STROKE ENGINE

Part of: Engineering Design Practice

Published online by Cambridge University Press:  11 June 2020

A. Zahn ,
P. Diwisch ,
F. Rieg  and
B. Alber-Laukant
A. Zahn*
Affiliation:
University of Bayreuth, Germany
P. Diwisch
Affiliation:
University of Bayreuth, Germany
F. Rieg
Affiliation:
University of Bayreuth, Germany
B. Alber-Laukant
Affiliation:
University of Bayreuth, Germany
*
*[email protected]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

A prototype of an innovative split-single two stroke engine is presented. With the aim of increasing the power-to-weight ratio for later mobile use, the individual engine components have to be revised. The focus is on the development process for the redesign of the crankcase. Through a preliminary examination of the necessary CAx systems, an iterative process chain that combines suitable synthesis and analysis tools is derived. This includes the design of the machine elements, a numerical strength verification using FEM and preparing the model for machining.

Keywords

design toolscomputer-aided design (CAD)prototypingfinite element method (FEM)
Type
Article
Information
Proceedings of the Design Society: DESIGN Conference , Volume 1 , May 2020 , pp. 2581 - 2588
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2020. Published by Cambridge University Press

References

Alber, B. (2008), Struktur- und Prozesssimulation zur Bauteildimensionierung mit thermoplastischen Kunststoffen: Validierung von Werkstoffbeschreibungen für den technischen Einsatz, [ PhD thesis], University of Bayreuth.Google Scholar
Alber, B. et al. (2006), “ICROS-The Selective Approach To High-Tech Polymer Product Design-Modelling And Experimental Verification”, Proceedings of the DESIGN 2006/9th International Design Conference, Dubrovnik, Croatia, 2006, The Design Society, Glasgow, pp. 417–424.Google Scholar
Diwisch, P. (2019), Entwicklung eines schnelllaufenden Doppelkolbenmotors: Prüfstand, Prototyp und Potential für den Erdgasbetrieb, [ PhD thesis], University of Bayreuth.Google Scholar
Diwisch, P. et al. (2016), “Design of an innovative natural gas two-stroke engine”, Proceedings of the DESIGN 2016/14th International Design Conference, Dubrovnik, Croatia, 2016, The Design Society, Glasgow, pp. 811–820.Google Scholar
Ferrari, C. et al. (2012), Studie zu Range Extender Konzepten für den Einsatz in einem batterieelektrischen Fahrzeug – REXEL, Deutsches Zentrum für Luft- und Raumfahrt, Stuttgart.Google Scholar
Frisch, M. (2015), Entwicklung eines Hybridalgorithmus zur steifigkeits- und spannungsoptimierten Auslegung von Konstruktionselementen, [ PhD thesis], University of Bayreuth.Google Scholar
Pischinger, S. and Seiffert, U. (2016), Vieweg Handbuch Kraftfahrzeugtechnik, Springer Vieweg, Wiesbaden, https://doi.org/10.1007/978-3-658-09528-4CrossRefGoogle Scholar
Rieg, F., Hackenschmidt, R. and Alber-Laukant, B. (2019), Finite-Elemente-Analyse für Ingenieure: Grundlagen und praktische Anwendungen mit Z88Aurora, Carl Hanser Verlag, München, https://doi.org/10.3139/9783446460621CrossRefGoogle Scholar
Roller, R. and Buck, V. (2016), Fachkunde Gießereitechnik: Technologie des Formens und Gießens, Europa-Fachbuchreihe für metalltechnische Berufe, Verlag Europa-Lehrmittel Nourney, Vollmer GmbH et Co. KG, Haan-Gruiten.Google Scholar
Schaumann, G. and Schmitz, K.W. (2010), Kraft-Wärme-Kopplung, Springer, Berlin, https://doi.org/10.1007/978-3-642-01425-3CrossRefGoogle Scholar
Tschöke, H. (2015), Die Elektrifizierung des Antriebsstrangs – Basiswissen, Springer Vieweg, Wiesbaden, https://doi.org/10.1007/978-3-658-04644-6Google Scholar
Vajna, S. et al. (2018), CAx für Ingenieure, Springer, Berlin, https://doi.org/10.1007/978-3-540-36039-1CrossRefGoogle Scholar
van Basshuysen, R. and Schäfer, F. (2017), Handbuch Verbrennungsmotor, Springer Fachmedien Wiesbaden, https://doi.org/10.1007/978-3-658-04678-1CrossRefGoogle Scholar
VDI (2014a), VDI 2230 Part 1 December 2014: Systematic calculation of highly stressed bolted joints - Joints with one cylindrical bolt, Verein Deutscher Ingenieure e.V., Düsseldorf.Google Scholar
VDI (2014b), VDI 2230 Part 2 December 2014: Systematic calculation of highly stressed bolted joints - Multi bolted joints, Verein Deutscher Ingenieure e.V., Düsseldorf.Google Scholar
Winkler, F. (2009), Untersuchungen zur Reduktion von Spülverlusten bei kleinvolumigen Zweitaktmotoren, [ PhD thesis], Technische Universität Graz.Google Scholar
Zapf, J., Alber-Laukant, B. and Rieg, F. (2010), “Customized Design Process Of Polymer Parts By Computer Aided Tools”, Proceedings of the DESIGN 2010/11th International Design Conference, Dubrovnik, Croatia, 2010, The Design Society, Glasgow, pp. 1753–1760.Google Scholar
Zima, S. and Ficht, R. (2010), Ungewöhnliche Motoren, Vogel Buchverlag, Würzburg.Google Scholar
Zoller, A. (1935), Internal Combustion Engine, U.S. Patent No. 2,014,678.Google Scholar