Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-25T17:57:14.662Z Has data issue: false hasContentIssue false

Simulations of Realizable Photonic Bandgap Structures with High Refractive Contrast

Published online by Cambridge University Press:  21 March 2011

Bonnie Gersten
Affiliation:
Weapons and Materials Research Directorate, Army Research Laboratory Aberdeen Proving Grounds, MD 21005-5069
Jennifer Synowczynski
Affiliation:
Weapons and Materials Research Directorate, Army Research Laboratory Aberdeen Proving Grounds, MD 21005-5069
Get access

Abstract

The transfer matrix method (TMM) software (Translight, A. Reynolds [1]) was used to evaluate the photonic band gap (PBG) properties of the periodic arrangement of high permittivity ferroelectric composite (40 wt% Ba0.45Sr0.55TiO3/60 wt% MgO composite, εR = 80, tanδ?= 0.0041 at 10 GHz) in air (or Styrofoam, εR ∼ 1) matrix compared to a lower permittivity material (Al2O3, εR = 11.54, tanδ?= 0.00003 at 10 GHz) in air. The periodic structures investigated included a one-dimensional (1D) stack and a three-dimensional (3D) face centered cubic (FCC) opal structure. The transmission spectrum was calculated for the normalized frequency for all incident angles for each structure. The results show that the bandgaps frequency increased and the bandgap width increased with increased permittivity. The effects of orientation of defects in the opal crystal were investigated. It was found by introducing defects propagation bands were introduced. It was concluded that a full PBG is possible with the high permittivity material.

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Reynolds, A., The University Court of the University of Glasglow, Translight (2000).Google Scholar
2. Joannopoulos, J. D., Villeneuve, P.R., and Fan, S., Nature, 386, 14 (1997).Google Scholar
3. Sievenpiper, D., Zhang, L., Yablonovitch, E., IEEE MTTS-S Digest TH2C–1, 1529 (1999).Google Scholar
4. Synowczynski, J. et al, Integrated Ferroelectrics, 22, 861 (1998).Google Scholar
5. Bjarklev, A., Bogaerts, W., Fields, T., Gallagher, D., Midrio, M., Lavrinenko, A., Mogitlevtsev, D., Sondergaard, T., Taillaert, D., and Tromborg, B., Report on Picco deliverable D8 for WP4 (2000).Google Scholar
6. Ward, J. and Pendry, J.B., Computer Physics Communications, 128 [3], 590 (2000).Google Scholar
7. Pendry, J. B., J. Phys. Condensed Matter, 8, 1089 (1996).Google Scholar
8. Chigrin, D. N., Lavrinenko, A. V., Yarotsky, D. A., Gaponenko, S. V., J. Lightwave Tech., 17 [11], (1999).Google Scholar
9. Reynolds, A., Lopez-Tejeira, F., Cassagne, D., Garcia-Vidal, F.J., Jouanin, C., Sanchez-Dehesa, J., Phys. Rev. B, 60 [16], 11422, (1999).Google Scholar