Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-25T17:50:24.679Z Has data issue: false hasContentIssue false
  • English
  • Français

Rapidly Solidified Microstructure in Surface Layers of Laseralloyed Mo on Fe-C Substrates

Published online by Cambridge University Press:  15 February 2011

T. R. Tucker ,
A. H. Clauer ,
S. L. Ream  and
C. T. Walters
T. R. Tucker
Affiliation:
Battelle Columbus Laboratories, Columbus, Ohio 43201
A. H. Clauer
Affiliation:
Battelle Columbus Laboratories, Columbus, Ohio 43201
S. L. Ream
Affiliation:
Battelle Columbus Laboratories, Columbus, Ohio 43201
C. T. Walters
Affiliation:
Battelle Columbus Laboratories, Columbus, Ohio 43201
Get access

Abstract

Shaped continuous-wave laser beams have been used to alloy molybdenum coatings into Fe-C substrates. The Mo overlay was first deposited by the plasma spray process in an inert gas environment. Slowly scanned laser radiation then melted a layer 2 to 5 times the thickness of the original Coating causing the two metallic species to mix. Melt proceeded from the coating/substrate interface, the Mo melt temperatures being significantly higher than that of the base material. Fusion zone microstructures for individual melt passes appeared to be homogeneous, and molybdenum composition was found to be relatively uniform. With overlapping melt passes, the microstructures became more complex with heat effects apparent in the overlap regions.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 8 , 1981 , 541
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Weinman, L. S., DeVault, J. H. and Moore, P., in Applications of Lasers in Materials Processing, Metzbower, E. A. ed., p. 245, Am. Soc. for Metals, Metals Park, Ohio (1979).Google Scholar
2.Draper, C. W., Preece, C. M., Jacobsen, D. C., Buene, L. and Poate, J. M., in Laser andElectron Beam Processing of Materials, White, C. W. and Peercy, P. S. eds., p. 721, Academic Press, NY (1980).Google Scholar
3.Gnanamuthu, D. S., in Applications of Lasers in Materials Processing, Metzbower, E. A. ed., p. 177, Am. Soc. for Metals, Metals Park, Ohio (1979).Google Scholar
4.Ayers, J. D. and Tucker, T. R., Thin Solid Films, V. 73, p. 201 (1980).10.1016/0040-6090(80)90352-1Google Scholar