Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-25T18:03:13.760Z Has data issue: false hasContentIssue false
  • English
  • Français

Processing of Thermoset Prepreg Laminates Via Exposure to Microwave Radiation

Published online by Cambridge University Press:  15 February 2011

Felix L. Paulauskas  and
Thomas T. Mee
Felix L. Paulauskas
Affiliation:
Oak Ridge National Laboratory, Engineering Technology Division, P.O.Box 2009, Oak Ridge, TN 37831–8048
Thomas T. Mee
Affiliation:
University of Tennessee, Materials Science and Engineering Department, Knoxville, TN 37996–2200
Get access

Abstract

Studies of microwave-assisted curing of neat resins (epoxy) and unidirectional glass and carbon fiber laminates have shown that a substantial reduction in the curing time was obtained [1]. This may be explained by the penetration of microwave energy directly and throughout the laminate with enhancement of the kinetics of the chemical reaction.

Results of this work indicate that the microwave assisted curing of glass fiber laminates also shows a substantial reduction of the required curing time.

Microwave radiation of 2.45 GHz has been demonstrated to be an acceptable method to cure unidirectional carbon fiber laminates. Also, effective curing of crossply (0/90) laminates through this method was observed when proper rotation of the parts accompanied the curing process. This is in accordance with previous work [2,3].

Multidirectional carbon fiber/epoxy laminates demonstrate a lack of coupling during the curing process. A direct curing of these laminates was not possible by microwave radiation with the experimental approach used, in agreement with previous work [4[. Nevertheless, a moderate reduction in the curing time of these thin laminates was observed due to hybrid curing.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 347: Symposium O – Microwave Processing of Materials IV , 1994 , 743
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Mijovic, J. and Wijaya, J., Polymer Composites 11(3), 184 (1990).Google Scholar
2. Wei, J. and Hawley, M. C., Sampe J., 11(1), 33 (1991).Google Scholar
3. Chen, Y. F. and Lee, Y. C., Proceedings of the American Chemical Society Division of Polymer Materials: Science and Engineering. 60, 680 (1989).Google Scholar
4. Lee, W. I. and Springer, G. S., J. Composite Materials 18, 357 (1984).Google Scholar