Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-23T19:38:21.486Z Has data issue: false hasContentIssue false

Phase Transformation from Mg to MgH2 Studied by SEM Metallography

Published online by Cambridge University Press:  31 January 2011

Amelia Montone
Affiliation:
[email protected], ENEA,Research Center of Casaccia, MATCOMP, Rome, Italy
Annalisa Aurora
Affiliation:
[email protected], ENEA,Research Center of Casaccia, MATCOMP, Rome, Italy
Daniele Mirabile Gattia
Affiliation:
[email protected], ENEA,Research Center of Casaccia, MATCOMP, Rome, Italy
Marco Vittori Antisari
Affiliation:
[email protected], ENEA,Research Center of Casaccia, MATCOMP, Rome, Italy
Get access

Abstract

Metallographic information has been used to support the kinetic analysis and the relative experimental findings in the phase transformation from Mg to MgH2, by absorption of hydrogen gas. In particular the method provides detailed information on the role of localized features like catalyst particles and defects present in the sample, which is obtained from ball milled MgH2 enriched with 5wt% Fe. In this work we have compared the kinetics of the hydrogenation reaction carried out at two different temperatures while keeping constant the thermodynamic force driving the reaction. This last was achieved by carefully controlling the hydrogen gas pressure. Despite this fact, the sample microstructure shows a marked effect of the temperature on the nucleation mechanism. In particular we have noticed that the density of sites active for nucleation is higher at lower temperature.

Instant nucleation deduced by the kinetic analysis was confirmed by comparing the microstructure of samples at different reaction stages.

Type
Research Article
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Antisari, M. Vittori, Montone, A. Aurora, A. Mancini, M.R. Gattia, D. Mirabile, Pilloni, L. Intermetallics 17 249 (2009).Google Scholar
[2] Cazaux, J., Scanning 26 181 (2004).Google Scholar
[3] Rudmann, P.S. J. Appl. Phys. 50 7195 (1979).Google Scholar
[4] Montone, A. Antisari, M. Vittori, Micron, 34 79 (2003).Google Scholar
[5] Avrami, J. J. Chem. Phys. 7 1103 (1939); J. Avrami J. Chem. Phys. 8 212 (1940); J. Avrami J. Chem. Phys. 9 177 (1941).Google Scholar
[6] Mintz, M. Zeiri, Y. J. Alloys Comp., 216 159 (1994).Google Scholar
[7] Kempen, A.T. Sommer, F. Mittemmeeija, E.J. J. Mater. Sci., 37 1321 (2002).Google Scholar
[8] Antisari, M. Vittori, Aurora, A. Gattia, D. Mirabile, Montone, A. Scripta Materialia 61 (11), 1064 (2009).Google Scholar