Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-25T17:39:49.275Z Has data issue: false hasContentIssue false

MOVPE Growth and Doping of ZnTe Using Tertiarybutylphosphine as the Metalorganic Doping Precursor

Published online by Cambridge University Press:  22 February 2011

N. R. Perkins
Affiliation:
University of Wisconsin, Materials Science Program, Madison, WI 53706
David F. Dawson-Elli
Affiliation:
University of Wisconsin, Materials Science Program, Madison, WI 53706
T.F. Kuech
Affiliation:
University of Wisconsin, Materials Science Program, Madison, WI 53706 University of Wisconsin, Dept. of Chemical Engineering, Madison, WI 53706
Get access

Abstract

ZnTe has gained attention as a promising material for short wavelength optoelectronic applications. Unlike ZnSe, ZnTe can be doped p-type but not n-type. There are few reports detailing the growth and doping of ZnTe films through the MOVPE technique. We present growth and doping studies for ZnTe formed through low pressure MOVPE. Dimethylzinctriethylamine and diisopropyltelluride were chosen as the metalorganic precursors. Growth studies were carried out on both GaAs (100) and GaSb (100) substrates. Growth morphology was very sensitive to both the lattice mismatch and the initial surface preparation. This is particularly evident on the GaSb substrates. ZnTe growth temperatures ranged from 340 to 420°C, and growth rates of up to 1 μm/hour were achieved. ZnTe was found to be readily doped using tertiarybutylphosphine, with p-type concentrations ranging from 4×1016 cm−3 to 2x1019 cm−3, and corresponding room temperature hole mobilities between 55 and 12 cm2/V-sec. Tertiarybutylphosphine was also observed to significantly improve the surface morphology for growths on GaSb substrates.

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Park, R.M, Troffer, M.B., Roleau, C.M., DePuydt, J.M., and Haase, M.A., Appl. Phys. Lett. 57, 2127 (1990)Google Scholar
2. Hhkawa, K., Karasawa, T., and Mitsuyu, T., Jpn. J. Appl. Phys. 30, L152 (1991).Google Scholar
3. Phillips, M.C., Wang, M.W., Swenberg, J.F., McCaldin, J.O., and McGill, T.C., Appl. Phys. Lett. 61, 1962 (1992)Google Scholar
4. Simmons, M.Y., Allak, H.M. Al, Brinkman, A.W., and Durose, K., J. Cryst. Growth 117, 959 (1992)Google Scholar
5. Yokogawa, T. and Narusawa, T., J. Cryst. Growth 117, 480 (1992).Google Scholar
6. Shtrikman, H., Raizman, A., Oron, M., and Eger, D., J. Cryst. Growth 88, 522 (1988).Google Scholar
7. Clifton, P.A., Mullins, J.T., Brown, P.D., Russell, G.J., Brinkman, A.W., and Woods, J., J. Cryst. Growth 93, 726 (1988).Google Scholar
8. Ekawa, M., Kawakami, Y., Taguchi, T., and Hiraki, A., J. Cryst. Growth 93, 667 (1988).Google Scholar
9. Kuhn, W., Wagner, H.P., Stanzl, H., Wolf, K., Worle, K., Lankes, S., Betz, J., Worz, M., Lichtenberger, D., Leiderer, H., Gebhardt, W., and Triboulet, R., Semicond. Sci. Technol. 6 A105 (1991)Google Scholar
10. Jones, A.C., J. Cryst. Growth 129, 750 (1993)Google Scholar
11. Li, S.H., Larson, C.A., Buchan, N.I., and Stringfellow, G.B., J. Elect. Matl. 18, 457 (1989).Google Scholar
12. Silva, F.W.O. Da, Raisin, C., Silga, M., Nouaoura, M., and Lassabatere, L., Semicond. Sci. Technol. 4, 565 (1989).Google Scholar
13. Halsall, M.P., Woverson, D., Davies, J.J., Lunn, B., Ashenford, D.E., Appl. Phys. Lett. 60 2129 (1992)Google Scholar
14. Duddles, N.J., Nicholls, J.E., Gregory, T.J., Hagston, W.E., Lunn, B., and Ashenford, D.E., J. Vac. Sci. Tech. B. 10 912 (1992)Google Scholar
15. Khan, O.F.Z., O'Brian, P., Hamilton, P.A. Walsh, J.R, and Jones, A.C., Chemtronics 4 244 (1989)Google Scholar
16. Zingaro, R.A., Steeves, B.H., and Irgolic, K., J. Organomet. Chem. 4 320 (1965)Google Scholar