Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-19T12:25:59.685Z Has data issue: false hasContentIssue false

The Load Capability of Piezoelectric Single Crystal Actuators

Published online by Cambridge University Press:  01 February 2011

Tian-Bing Xu
Affiliation:
[email protected], National Institute of Aerospace, 100 Exploration Way, Hampton, VA, 23666, United States
Ji Su
Affiliation:
Xiaoning Jiang
Affiliation:
Paul W. Rehrig
Affiliation:
Wesley S. Hackenberger
Affiliation:
Get access

Abstract

Piezoelectric lead magnesium niobate-lead titanate (PMN-PT) single crystal is one of the most promising materials for electromechanical device applications due to its high electrical field induced strain and high electromechanical coupling factor. PMN-PT single crystal-based multilayer stack actuators and multilayer stack-based flextensional actuators have exhibited high stroke and high displacement-voltage ratios. The actuation capabilities of these two actuators were evaluated using a newly developed method based upon a laser vibrometer system under various loading conditions. The measured displacements as a function of mechanical loads at different driving voltages indicate that the displacement response of the actuators is approximately constant under broad ranges of mechanical load. The load capabilities of these PMN-PT single crystal-based actuators and the advantages of the capability for applications will be discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

6 REFERENCES

1. Uchino, K., Piezoelectric Actuators and Ultrasonic Motor, Boston, Kluwer, 1997 Google Scholar
2. Xu, Yuhuan, Ferroelectric materials and their applications, Elsevier Science Publishers B.V., North-Holland, 1991 Google Scholar
3. Cross, L. E., “Ferroelectric ceramics: Materials and application issues”, Ceramic Trans. Vol. 68, pp. 1555, 1996.Google Scholar
4. Newnham, R.E., “Composite Electroceramics,” Ann. Rev. Mat. Sci. Vol. 16, pp. 4768, 1986 Google Scholar
5. Park, S.-E., and Shrout, T. R.Ultrahigh Strain and piezoelectric behavior in relaxor based ferroelectric single crystal”, J. Appl. Phys., Vol. 82, No. 4, pp. 18041811, 1997 Google Scholar
6. Ma, Z., Scheinbein, J. I. and Newman, B. A., “High field electrostrictive response of polymers”, J. Polym. Sci. Part B, Polym. Phys. Vol. 32, pp. 27212731, 1994.Google Scholar
7. Pelrine, R. E., Kornbluh, R. D., and Joseph, J. P., “Electrostriction of polymer dielectrics with compliant electrodes as a mean of actuation”, Sens. Actuators A, Vol. 64, pp.7785, 1998 Google Scholar
8. Su, J., Zhang, Q.M., and Ting, R.Y.Space-charge-enhanced electromechanical response in thin-film polyurethane elastomers,” Appl. Phys. Lett., Vol. 71, no. 3, pp. 386388, 1997 Google Scholar
9. Wang, Q-M, “Piezoelectric ceramic actuators and composite structure for active noise control applications,” Ph. D. Thesis, Penn State University 1998.Google Scholar
10. Liu, S. F., Park, S. E., Cross, L. E., and Shrout, T. R., J. Appl. Phys. 92 (1), 461 (2002).Google Scholar
11. Newnham, R. E., Xu, Q. C., and Yoshikawa, S., United State Patent, # 4,999,819 (1991), and # 5,276,657 (1994).Google Scholar
12. Woody, S. C., Smith, S. T., Jiang, X., and Rehrig, P. W., “Performance of single crystal Pb(Mg1/3Nb2/3)-32%PbTiO3 stack actuators with application to adaptive structures,” Review of Science Instruments 76, 2005, # 075112 Google Scholar
13. Meyer, R. J. Jr, Dogan, A., Yoon, C., Pigrim, S. M., and Newnham, R. E., “Displacement amplification of electroactive materials using the cymbal flextensional transducer,” Sensors and Actuators A, Vol. 87, 2001, pp. 157162.Google Scholar