Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-06T11:13:54.319Z Has data issue: false hasContentIssue false
  • English
  • Français

Layered Poly/Amorphous Silicon Deposition Process for Improved Silicide Integrity

Published online by Cambridge University Press:  28 February 2011

P. K. Roy ,
A. K. Nanda  and
J. A. Taylor
P. K. Roy
Affiliation:
AT&T Bell Laboratories, 555 Union Boulevard, Allentown, PA 18103
A. K. Nanda
Affiliation:
AT&T Bell Laboratories, 555 Union Boulevard, Allentown, PA 18103
J. A. Taylor
Affiliation:
AT&T Bell Laboratories, 555 Union Boulevard, Allentown, PA 18103
Get access

Abstract

This work describes an elegant way to control suicide integrity and the quality of the silicide/polySi or amorphous (α) Si interface by a multilayered deposition process. Structurally superior polySi/or-Si layer resulting from this process allows one to reduce the stack height of the polySi/α-Si layer without compromising suicide integrity and silicide/Si interfacial qualities.

Impact of layering during polySi/α-Si deposition on the suicided structure were evaluated from XRD, RBS, cross-sectional TEM, sheet resistance, and SIMS analysis.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 283: Symposium F – Microcrystalline Semiconductors–Materials Science and Devices , 1992 , 647
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Rosser, P. and Tomkins, G., Vacuum, 34, 419 (1985).Google Scholar
[2] Meschter, P. J. and Schwartz, D. S., JOM, 41 (11), 52 (1989).Google Scholar
[3] Shenai, K., J.Mater. Res., 6 (7), 1502 (1991).Google Scholar
[4] Leiberich, A. and Roy, P. K., MRS Symp. Proc. Vol. 239, 87 (1992)Google Scholar
Roy, P. K., Chittipeddi, S. C., and Velaga, A. N., “Improved Suicide Formation” U.S. Patent 5,132,244, July 21, 1992.Google Scholar
[5] Beyers, R. and Sinclair, R., J. Appl. Phys. 57, 5240 (1985).Google Scholar
[6] van Houtum, H. J. W. and Raaijmakers, I. J. M. M., MRS Symp. Proc, 54, 37 (1986).Google Scholar
[7] Donovan, E. P., Spaepen, F., Turnbull, D., Poate, J. M., and Jacobson, D. C., J. Appl. Phys., 57, 1795 (1985).Google Scholar