Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-25T17:31:58.883Z Has data issue: false hasContentIssue false
  • English
  • Français

Incoherent Focused Radiation for Activation of Implanted InP

Published online by Cambridge University Press:  15 February 2011

J.P. Lorenzo ,
D.E. Davies ,
K.J. Soda ,
T.G. Ryan  and
P.J. McNally
J.P. Lorenzo
Affiliation:
Rome Air Development Center, Hanscom AFB, MA 1731
D.E. Davies
Affiliation:
Rome Air Development Center, Hanscom AFB, MA 1731
K.J. Soda
Affiliation:
Rome Air Development Center, Hanscom AFB, MA 1731
T.G. Ryan
Affiliation:
Rome Air Development Center, Hanscom AFB, MA 1731
P.J. McNally
Affiliation:
Rome Air Development Center, Hanscom AFB, MA 1731
Get access

Abstract

InP layers implanted with Si+ ions are successfully activated through the use of a focused incoherent energy source. High mobility values and excellent carrier concentrations, both directly comparable to values attained using conventional furnace annealing, are achieved with this technique. Under optimized anneal conditions, electrical evaluation also indicates no surface anomalies such as those encountered with pulsed laser or electron beam annealed InP.

The annealing technique described here makes use of the output from two broad spectrum 1000 watt incandescent sources. Through the use of elliptical mirrors, a combined thermal image of these sources is formed as the output at a common focus. The sample is placed at this focus during the anneal cycle. Anneal time is controlled electronically and for these experiments is varied for 1 to 15 sec. Substrate temperature is measured with a low-mass thermocouple recorder readout system placed at the focus in contact with the sample. Annealing temperatures range from 750°C to 950°C. To prevent phosphorus loss and other surface anomalies, dielectric encapsulation and a solid phosphorus proximity source technique are examined. While the proximity technique has proven useful, PSG/Si02 double layered dielectric encapsulants appear to provide the most consistent results.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 13 , 1982 , 683
Copyright
Copyright © Materials Research Society 1983

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

Comsat Laboratories Clarksburg MD 20871

References

REFERENCES

1.Davies, D.E., Lorenzo, J.P., Ryan, T.G. and Fitzgerald, J.J., Appl. Phys. Lett 35, 631, 1979.Google Scholar
2.Davies, D.E., McNally, P.J., Lorenzo, J.P. and Julian, M., IEEE Elec. Device Lett. 102, 1982.Google Scholar
3.Lorenzo, J.P., Davies, D.E. and Ryan, T.G., J. Electrochem. Soc. 126, 118, 1979.Google Scholar
4.Lorenzo, J.P., Soda, K.J. and Davies, D.E., Laser and Electron-Beam Interactions with Solids Appleton, B.R. and Celler, G.K., editors 1982.Google Scholar
5.Vaidyanathan, K.V., Dunlap, H.L. and Anderson, C.L., Int. Symp. GaAs and Related Compounds, Japan, 1981.Google Scholar
6.Donnelly, J.P. and Ferrante, G.A., Solid State Elec. Vol 23, 1151, 1980.Google Scholar
7.Astles, M.G., Smith, F.G.H. and Williams, E.W., J. Electrochem. Soc. 120, 1750, 1973.Google Scholar
8.Lee, T.P. and Burrus, C.A., Appl. Phys. Lett. 36, 587, 1980.Google Scholar