Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-20T06:43:11.101Z Has data issue: false hasContentIssue false
  • English
  • Français

Improved Tribological Properties of Diamondlike Carbon/Metal Nanocomposites

Published online by Cambridge University Press:  01 February 2011

Roger J. Narayan  and
Dirk Scholvin
Roger J. Narayan
Affiliation:
School of Materials Science and Engineering, Georgia Institute of Technology Atlanta, GA 30332–0245, USA
Dirk Scholvin
Affiliation:
School of Materials Science and Engineering, Georgia Institute of Technology Atlanta, GA 30332–0245, USA
Get access

Abstract

One of the many forms of carbon, diamondlike carbon (DLC), consists mainly of sp3-bonded carbon atoms. DLC coatings possess properties close to diamond in terms of hardness, atomic bonding, and chemical inertness. Unfortunately, DLC exhibits poor adhesion to metals and polymers. The adhesion of the DLC film is determined by internal stresses in the film and by interfacial bonding. This work involves processing, characterization and modeling of diamondlike composite films on metal and polymer substrates to improve adhesion and wear properties. A novel target design was adopted to incorporate metal (silver or titanium) atoms into DLC films during pulsed laser deposition. STEM of the DLC/metal nanocomposites has shown that the metals that do not form carbides (e.g., silver) form 2–10 nm inclusions within the DLC matrix. Wear resistance measurements made on these samples have demonstrated that DLC/metal nanocomposites possess exceptional wear resistance. Diamond-like carbon nanocomposites also exhibit significantly enhanced adhesion. Careful analysis of the Raman data also indicated a significant shift to shorter wavelength in DLC nanocomposite films, indicating a reduction in compressive stress within these films. The sp3 content of these films was studied using electron energy loss spectroscopy (EELS). By varying the metal concentration as a function of distance from the interface, we have created functionally gradient DLC nanocomposites. These DLC/metal nanocomposite coatings have multiple biomedical applications.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 788: Symposium L – Continuous Nanophase and Nanostructured Materials , 2003 , L5.2
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Narayan, J., Fan, W. D., Narayan, R. J., Tiwari, P., and Stadelmaier, H. H., Materials Science and Engineering B. 25, 5–10 (1994).Google Scholar
2. Venables, J. D., Wernick, J. H., Angus, J. C., Bell, P. M., Cuomo, J. J., DeVries, R. C., Feldman, A., Geis, M. W., Hoover, D. S., and Messier, R., Status and Applications of Diamond and Diamondlike Materials: An Emerging Technology. (National Research Council, Washington DC, 1990) p. 14.Google Scholar
3. Friedmann, T. A., Sullivan, J. P., Knapp, J. A., Tallant, D. R., Follstaedt, D. M., Medlin, D. L. and Mirkarimi, P. B., Appl. Phys. Lett. 71, 3820 (1997).Google Scholar
4. Kustas, F. M., Misra, M.S., Shepard, D. F., and Forechtenigt, J. F.. Surface and Coatings Technology. 48 (2), 113–119 (1991).Google Scholar
5. Bruley, J., Williams, D. B., Cuomo, J. J., Pappas, D. P., Journal of Microscopy-Oxford. 180 (1), 22–32 (1995).Google Scholar
6. Voevodin, A. A., Capano, M. A., Laube, S. J. P., Donley, M. S. and Zabinski, J. S., Thin Solid Films. 298, 107 (1997).Google Scholar
7. Oliveira, J., Cavaleiro, A., Viera, M., Surface and Coatings Technology. 132, 99–104 (2000).Google Scholar