Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-23T05:28:45.515Z Has data issue: false hasContentIssue false
  • English
  • Français

High Reflectivity Modulation Electrochromic Windows

Published online by Cambridge University Press:  15 February 2011

A. Gerouki  and
R.B. Goldner
A. Gerouki
Affiliation:
Tufts University Electro-Optics Technology, Center 4 Colby Street, Medford MA 02155
R.B. Goldner
Affiliation:
Tufts University Electro-Optics Technology, Center 4 Colby Street, Medford MA 02155
Get access

Abstract

In this paper we report the fabrication of high reflectivity modulation electrochromic Windows (ECW's) which have exhibited a colored state reflectivity of more than 50% for the wavelength range of 1 to 2.5 µm with an average bleached state reflectivity of 20%. The transmissivity of these ECW's in the colored state was less than 5% and in the bleached state it averaged 60%. The materials employed were tungsten oxide (nominally WO3) for the first electrochromic electrode, lithium cobalt oxide (nominally LiCoO2) for the second, complementary, electrochromic electrode, lithium phosphorus oxynitride (Lipon) for the ionic conductor (electrolyte), and indium tin oxide (ITO) and indium oxide (In2O3) for the two transparent electronic conductors. The predicted and measured reflectivity of the ECW's were influenced by the first transparent conductor (TM) in relation to its thickness and optical properties. Devices without a TC1 exhibited the highest reflectivity modulation, It was also concluded that two of the main limitations to the degree of reflectivity modulation attainable with the ECW's were lithium insertion into TC1 and electronic transport through the electrolyte.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 548: Symposia EE – Solid State Ionics V , 1998 , 679
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Goldner, R. B. et al. , Solid State Ionics 53–56, pp. 617–627, (1992).Google Scholar
2. Goldner, R. B., J. Vac. Sci. Technol. A (13)(3), May/Jun (1995).Google Scholar
3. Bates, J. B., Dudney, N. J., Gruzalski, F. R, Zuhr, R. A, Choudhury, A., Luck, C. F. and Robertson, J. D., Solid State Ionics, 53–56, 647 (1992).Google Scholar
4. Yu, Xiaohua, Bates, J. B., Jellison, G. E. Jr., and Hart, F. X., J. Electrochem. Soc., Vol. 144, No. 2,1997.Google Scholar
5. Lamaze, G. P., Chen-Mayer, H. h., “Analysis of Lithium Transport in Electrochromic Multilayer Films by Neutron Depth Profiling”, presented at the Electrochemical Society meeting, San Diego, CA, Spring 1998.Google Scholar
6. Gerouki, A., “Electrochromic Windows with High Reflectivity Modulation”, Ph.D. Thesis, EE,Tufts University, February 1998.Google Scholar
7. Berera, G. et al. , Mat. Res. Soc. Symp. Proc., 210, 69 (1991).Google Scholar
8. Goldner, R. B., Appl. Phys. Lett. 62 (14), pp. 1699–1701 (1993).Google Scholar
9. , Goldner et al. , “Transparent, Electrically conductive, ion-blocking layer for electrochromic windows”, U.S. Patent, 5,532,869 (Jul. 2,1996).Google Scholar