Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T07:46:24.406Z Has data issue: false hasContentIssue false
  • English
  • Français

Growth and patterning of strontium-titanate-oxide thin films for optical devices applications

Published online by Cambridge University Press:  15 March 2011

M. Gaidi ,
L. Stafford ,
M. Chaker ,
J. Margot  and
M. Kulishov
M. Gaidi
Affiliation:
INRS-Énergie, Matériaux et Télécommunications, Varennes, Québec, Canada
L. Stafford
Affiliation:
Département de physique, Université de Montréal, Montréal, Québec, Canada
M. Chaker
Affiliation:
INRS-Énergie, Matériaux et Télécommunications, Varennes, Québec, Canada
J. Margot
Affiliation:
Département de physique, Université de Montréal, Montréal, Québec, Canada
M. Kulishov
Affiliation:
Adtek Photomask, Montréal, Québec, Canada
Get access

Abstract

Strontium-titanate-oxide (STO) thin films have been deposited on silicon substrates by means of a reactive pulsed-laser-deposition technique. The influence of the oxygen deposition pressure on the microstructural properties of the films has been investigated by means of various characterization techniques. It was found that the crystalline quality of the film significantly deteriorates as the oxygen pressure increases. This is accompanied by an increase of the film microporosity. The microstructure of the film is found to directly impact the optical quality of the films. In particular, due to the higher density and crystallinity of the films deposited at lower oxygen pressure, films characterized by lower optical losses can be achieved in such conditions. These films have been used in the context of the development of optical waveguides. For this purpose, patterning of the STO films was investigated using sputter-etching with a high-density argon plasma operated in the very low pressure regime. Highly anisotropic features have been produced with high etch rate and good selectivity over resist. Preliminary results indicate the STO films can be successfully incorporated in functional waveguides.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 817: Symposium L – New Materials for Microphotonics , 2004 , L6.16
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Sanchez, F., Varela, M., Queralt, X., Aguiar, R., & Morenza, J.L., Appl. Phys. Lett. 61, 2228 (1987).Google Scholar
2 Khakani, M. A. El, Chaker, M., & Gat, E., Appl. Phys. Lett. 69, 2027 (1996).Google Scholar
3 Stafford, L., Margot, J., Delprat, S., Chaker, M., & Queney, D., J. Vac. Sci. Technol. A 20, 530 (2002).Google Scholar
4 Amassian, A., private communication.Google Scholar
5 Yeh, M. H., Liu, K. S. and Lin, I. Nan., Jpn. J. Appl. Phys. 34, 2247 (1995).Google Scholar
6 Hiratani, M., Imagawa, K., & Takagi, K., Jpn. J. Appl. Phys. 34, 254 (1995).Google Scholar
7 Doolittle, L. R., Nucl. Instr. Meth. B 15, 227 (1986).Google Scholar
8 Kim, Y. J. & Kim, H. J.,Material Lett. 41, 159 (1999).Google Scholar
9 Park, K. C. & Kim, K. B., J. Appl. Phys. 80, 5674 (1996).Google Scholar
10 Delprat, S., Chaker, M., & Margot, J., J. Appl. Phys. 89, 29 (2001).Google Scholar