Hostname: page-component-cd9895bd7-gbm5v Total loading time: 0 Render date: 2024-12-27T18:09:19.338Z Has data issue: false hasContentIssue false
  • English
  • Français

Growth and Characterization of Epitaxial Al1−xInxN Films Grown on Sapphire (0001) by Plasma Source Molecular Beam Epitaxy

Published online by Cambridge University Press:  17 March 2011

M. J. Lukitsch ,
G. W. Auner ,
R. Naik  and
V. M. Naik
M. J. Lukitsch
Affiliation:
Dept. of Electrical and Computer Engineering, Wayne State University, Detroit, MI
G. W. Auner
Affiliation:
Dept. of Electrical and Computer Engineering, Wayne State University, Detroit, MI
R. Naik
Affiliation:
Dept. of Physics, Wayne State University, Detroit, MI
V. M. Naik
Affiliation:
Department of Natural Sciences, University of Michigan-Dearborn, Dearborn, MI
Get access

Abstract

Epitaxial Al1−xInxN films (thickness ∼150 nm) with 0 ≤ × ≤ 1 have been grown by Plasma Source Molecular Beam Epitaxy on Sapphire (0001) at a low substrate temperature of 375°C and were characterized by reflection high energy electron diffraction (RHEED), x-ray diffraction (XRD), and atomic force microscopy (AFM). Both RHEED and XRD measurements confirm the c-plane growth of Al1-xInxN films on sapphire (0001) with the following epitaxial relations: Nitride [0001] ∥ Sapphire [0001] and Nitride < 0110 > ∥ Sapphire <2110>. The films do not show any alloy segregation. However, the degree of crystalline mosaicity and the compositional fluctuation increases with increasing In concentration. Further, AFM measurements show an increased surface roughness with increasing In concentration in the alloy films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 639: Symposium G – GaN and Related Alloys-2000 , 2000 , G6.54
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Jain, S.C., Willander, M., Narayan, J., and Overstraeten, R. Van, J. Appl Phys. 87, 965 (2000).Google Scholar
2. Yamaguchi, S., Kariya, M., Nitta, S., Takeuchi, T., Wetzel, C., Amano, H., Akasaki, I., Appl. Phys. Lett. 76, 876 (2000); and references there in.Google Scholar
3. Peng, T., Piprek, J., Qiu, G., Olowoiafe, J.O., Unruh, K.M., Swann, C.P., Shubert, E.F., Appl. Phys. Lett. 71, 2439 (1997).Google Scholar
4. Kim, K.S., Saxler, A., Kung, P., Razaghi, M., Lim, K.Y., Appl. Phys. Lett. 71, 800 (1997).Google Scholar
5. Guo, O., Ogawa, H. and Yoshida, A., J. Cryst. Growth 146, 462 (1995).Google Scholar
6. Kubota, K., Kobayashi, Y., Fujimoto, K., J. Appl. Phys. 66 2984 (1989).Google Scholar
7. Matsuoka, T., Appl. Phys. Lett. 71, 105 (1997).Google Scholar
8. Auner, G.W., Lenane, T.D., Ahmad, F., Naik, R., Kuo, P.K., and Wu, Z.L., Wide Band Gap Electronic Materials, pp. 329, Academic Press, 1995.Google Scholar
9.See the article in this volume by Danylyuk, Y.V., Lukitsch, M.J., Huang, C., Auner, G.W., Naik, R. and Naik, V.M..Google Scholar