Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-09T07:42:04.004Z Has data issue: false hasContentIssue false

GaN layers re-grown on etched GaN templates by plasma assisted molecular beam epitaxy

Published online by Cambridge University Press:  01 February 2011

L. He
Affiliation:
Department of Electrical Engineering, Virginia Commonwealth University, Richmond, Virginia 23284
J. Xie
Affiliation:
Department of Electrical Engineering, Virginia Commonwealth University, Richmond, Virginia 23284
F. Yun
Affiliation:
Department of Electrical Engineering, Virginia Commonwealth University, Richmond, Virginia 23284
A. A. Baski
Affiliation:
Department of Electrical Engineering, Virginia Commonwealth University, Richmond, Virginia 23284
H. Morkoç
Affiliation:
Department of Electrical Engineering, Virginia Commonwealth University, Richmond, Virginia 23284
Get access

Abstract

The growth of high-quality GaN by plasma assisted molecular beam epitaxy (MBE) is challenging, in part due to the constraint of heteroepitaxy since GaN substrates are not yet commercially available and isotropic nature of growth. Despite the large lattice and thermal mismatch between sapphire and GaN, the former is still the most commonly used substrate for the GaN-based optical devices at present. In this paper, we demonstrate a re-growth technique to obtain an improved quality GaN by MBE on GaN template on sapphire where the grossly defective regions have been removed. This GaN template is formed by MBE growth of GaN followed by wet chemical etching to selectively remove the defective region. Improved quality GaN was re-grown on such a template under Ga rich conditions to a thickness of about 1 micron. After re-growth, the surface of GaN is atomically smooth with spiral features in the short range. The low temperature PL of the re-grown GaN is superior to those of MBE GaN films directly on sapphire. Atomic force microscopy (AFM) images reveal a two-dimensional re-growth initiating in regions free of extended defects. The results show that the selectively etched GaN on sapphire can be used as a good template to improve the quality of GaN.

Type
articles
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Strite, S. and Morkoç, H., J. Vac. Sci. Technol. B 10, 1237 (1992).Google Scholar
2. Omnes, F., Marenco, N., Beaumont, B., and De Mierry, Ph., J. Appl. Phys. 86, 5286 (1999).Google Scholar
3. Nakamura, S., Mukai, T., and Senoh, M., Appl. Phys. Lett. 64, 1687 (1994).Google Scholar
4. Nakamura, S., Senoh, M., Nagahama, S., Iwasa, N., Yamada, T., Matsushita, T., Sugimoto, Y., and Kiyoku, H., Appl. Phys. Lett. 70, 616 (1997).Google Scholar
5. Morkoç, Hadis, Carlo, Aldo Di and Cingolani, R., “GaN-Based Modulation Doped FETs and UV Detectors”, Solid State Electronics, Volume 46, Issue 2 pp. 157202, (2002).Google Scholar
6. Morkoç, Hadis, “Beyond SiC! III-V Nitride Based Heterostructures and Devices” in SiC Materials and Devices, Ed. Park, Y. S., Academic Press, Willardson and Beer Series. Vol. 52, pp. 307394, (1998).Google Scholar
7. Coli, G., Bajaj, K. K., Li, J., Lin, J. Y., and Jiang, H. X., Appl. Phys. Lett. 78, 1829 (2001).Google Scholar
8. Choi, S. C., Kim, J.-H., Choi, J. Y., Lee, K. J., Lim, K. Y. and Yang, G. M., J. Appl. Phys. 87, 172 (2000).Google Scholar
9. Stocker, D. A., Schubert, E. F. and Redwing, J. M., Appl. Phys. Lett. 73, 2654 (1998)Google Scholar
10. Visconti, P., Jones, K. M., Reshchikov, M. A., Cingolani, R., Morkoç, H., and Molnar, R. J., Appl. Phys. Lett. 77, 3532 (2000).Google Scholar
11. Heying, B., Tarsa, E. J., Elsass, C. R., Fini, P., DenBaars, S. P., and Speck, J. S., J. Appl. Phys. 85, 7470 (1999).Google Scholar