Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-23T13:27:41.887Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of YBCO film approached by TFA-MOD method using the Y2Ba1Cu1Ox and Ba3Cu5O8 powders

Published online by Cambridge University Press:  01 February 2011

Jun Hyung Lim ,
Seok Hern Jang ,
Kyung Min Yoon ,
Jinho Joo ,
Seung-Boo Jung  and
Wansoo Nah
Jun Hyung Lim
Affiliation:
[email protected], Sungkyunkwan University, School of advanced materials science and engineering, chunchun-dong, Jangan-gu, 300, suwon, N/A, 440-746, Korea, Republic of, 82-31-290-7385, 82-31-290-7371
Seok Hern Jang
Affiliation:
[email protected], Sungkyunkwan University, School of Advanced Materials Science and Engineering, 300 cheoncheon, Jangan, Suwon, Gyeonggi, 440-746, Korea, Republic of
Kyung Min Yoon
Affiliation:
[email protected], Sungkyunkwan University, School of Advanced Materials Science and Engineering, 300 cheoncheon, Jangan, Suwon, Gyeonggi, 440-746, Korea, Republic of
Jinho Joo
Affiliation:
[email protected], Sungkyunkwan University, School of Advanced Materials Science and Engineering, 300 cheoncheon, Jangan, Suwon, Gyeonggi, 440-746, Korea, Republic of
Seung-Boo Jung
Affiliation:
[email protected], Sungkyunkwan University, School of Advanced Materials Science and Engineering, 300 cheoncheon, Jangan, Suwon, Gyeonggi, 440-746, Korea, Republic of
Wansoo Nah
Affiliation:
[email protected], Sungkyunkwan University, School of Electrical and computer Engineering, 300 cheoncheon, Jangan, Suwon, Gyeonggi, 440-746, Korea, Republic of
Get access

Abstract

The YBCO films were fabricated by TFA-MOD method in route of ¡°211 process¡± and evaluated the phase formation, texture evolution, and critical properties as a function of the humidity firing process. In the fabrication process, Y2Ba1Cu1Ox and Ba3Cu5O8 powders, instead of Y-, Ba- and Cu-based acetates, were used as precursors. In order to evaluate the effect of humidity during the firing process, the films calcined at 430¡É were fired at 775¡É in dry Ar(0%), 4.2%, 8.0%, 12.1%, and 20.0% humidified Ar gas mixed with 1000 ppm oxygen.

We observed that the amount of BaF2 phase was effectively reduced and that a sharp and strong biaxial texture formed under a humidified atmosphere, leading to increased critical properties. The film became denser and the degree of texture and phase purity varied as the humidity increased. For the film fired in 0% humidity, the measured value of Tc(onset) was found to be 82.5 K, but the Tc(zero) could not be measured. When the humidity was increased to 4.2%, the corresponding Tc(onset) and Tc(zero) were increased to 91.5 K and 88.6 K, respectively. For the films in the humidity range of 12.1-20.0%, the critical current was found to be 30 A/cm-width (the corresponding critical current density is 1.54 MA/cm2).

Keywords

superconductingmetalorganic depositiontexture
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 946: Symposium HH – Recent Advances in Superconductivity , 2006 , 0946-HH08-06
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Izumi, T., Tokunaga, Y., Fuji, H., Teranishi, R., Matsuda, J., Asada, S., Honjo, T., Shiohara, Y., Muroga, T., Miyata, S., Watanabe, T., Yamada, Y., Iijima, Y., Saitoh, T., Goto, T., Yoshinaka, A., Yajima, A., Physica C, 412–414, 885 (2004)Google Scholar
2 Lim, J. H., Jang, S. H., Kim, J. H., Kim, K. T., Joo, J., Jung, S., Kim, J. G., Lee, H. G., Hong, G. W., Physica C, 426–4131, 973 (2005)Google Scholar
3 Mclntyre, P C Cima, M J Smith, Jr A, J, and Hallock, R B “Effect of growth conditions on the properties and morphology of chemically derived epitaxial thin films of Ba2YCu3O7–x on (001) LaAlO3”, J. Appl. Phys., 71, 1868 (1992)Google Scholar
4 Jee, Y-A, Ma, B, Maroni, V A Li, M, Fisher B, L and Balachandran, U, “Texture development and superconducting properties of YBa2Cu3Ox thin films prepared by a solution process in low oxygen partial pressure”, Supercond. Sci. Technol. 14, 285–291 (2001)Google Scholar
5 Izumi, T Honjo, T Tokunaga, Y Fuji, H Teranishi, R Iijima, Y Saitoh, T Nakamura, Y Shiohara, Y, “High-Ic YBCO coated conductors by metal organic deposition method using trifluoroacetates”, IEEE Trans. on applied supercond., 13, 2, 2500 (2003)Google Scholar