Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-25T18:37:05.931Z Has data issue: false hasContentIssue false
  • English
  • Français

Crystal Growth of RuAl-base Alloys

Published online by Cambridge University Press:  21 March 2011

Sebastien Rosset ,
E. Cefalu ,
Louis W. Varner  and
David R. Johnson
Sebastien Rosset
Affiliation:
Materials Engineering, Purdue University, West Lafayette, IN 47907–1289
E. Cefalu
Affiliation:
Materials Engineering, Purdue University, West Lafayette, IN 47907–1289
Louis W. Varner
Affiliation:
Materials Engineering, Purdue University, West Lafayette, IN 47907–1289
David R. Johnson
Affiliation:
Materials Engineering, Purdue University, West Lafayette, IN 47907–1289
Get access

Abstract

Different techniques to produce single crystals of RuAl were investigated. Processing from the melt is problematic due to the rapid loss of Al. However, very large grained RuAl specimens can be produced from the solid-state by arc-zone melting. Directional solidification of eutectic alloys is less problematic due to the lower melting temperature. Alloys of RuAl-Mo were found to be eutectic, and the eutectic composition was determined to be RuAl-51 wt% Mo.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 646 , 2000 , N5.28.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Fleischer, R. L. and Zabala, R. J., Met Trans A 21A, 2709–2715 (1990).Google Scholar
2. Wolff, I.M, Sauthoff, G., Cornish, L.A., Steyn, H. DeV. and Coetzee, R., “Structure-property-application relationships in ruthenium aluminide RuAl,” in Structural Intermetallics 1997, edited by Nathal, M.V., et al., (TMS, Warrendale, PA 1996), p. 815–830 Google Scholar
3. Fleischer, R. L. and McKee, D. W., Met. Trans. A 24A, 759–762 (1993).Google Scholar
4. Lu, D.C., and Pollock, T.M., Acta Mater. 47, 1035–1042 (1999).Google Scholar
5. Boniface, T. D., and Cornish, L. A., J. Alloys and Compounds 234, 275–279 (1996).Google Scholar
6. Jones, D. W., “Refractory metal crystal growth techniques,” in Crystal Growth, Theory & Techniques, (Plenum press, New York, 1974) p. 252.Google Scholar
7. Lograsso, T.A., Schmidt, F.A., J. of Crystal Growth 110, 363–372 (1991).Google Scholar