Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-25T17:43:15.576Z Has data issue: false hasContentIssue false
  • English
  • Français

The Critical Condition for the Initiation of Localized Corrosion of Mild Steel Used for Nuclear Waste Package

Published online by Cambridge University Press:  28 February 2011

Gen Nakayama  and
Mastsuna Akashi
Gen Nakayama
Affiliation:
Ishikawajima-Harima Heavy Industries Co., Ltd. Research Institute 3–1–15 Toyosu, Koto-ku, Tokyo 135, Japan
Mastsuna Akashi
Affiliation:
Ishikawajima-Harima Heavy Industries Co., Ltd. Research Institute 3–1–15 Toyosu, Koto-ku, Tokyo 135, Japan
Get access

Abstract

The general corrosion rate of mild steel is so small in neutral water environments that adequately provided corrosion allowance can ensure the requirement of one thousand years’ integrity of geological disposal package of high-level nuclear wastes. In alkaline water environments, however, mild steels can passivate themselves and often undergo localized corrosion in much the same manner stainless steels do in neutral water environments. This paper describes a study of localized corrosion behavior of the mild steel conducted to assess the long-term performance of the disposal packages. The critical potentials for pitting and crevice corrosion and critical pH for general corrosion-to-passivity transition were determined for neutral and alkaline water environments. Effects of temperature, pH, and chloride and other anion concentrations on the critical potentials and the critical pH were discussed. The initiation and propagation behavior of crevice corrosion was also analyzed under potentiostatic conditions.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 212: Symposium P – Scientific Basis for Nuclear Waste Management XIV , 1990 , 279
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Akashi, M., Fukuda, T. and Yoneyama, H.: “A Corrosion Localization Assess ment of the Mild Steel Used for Nuclear Waste Package”, in “Scientific Basis for Nuclear Waste Management XIII”, Mat. Res. Soc. Symp. Proc, Vol.176, Ed. by Oversby, V.M. and Brown, P.W., Mat. Res. Soc, p.525 (1990).Google Scholar
[2] Marsh, G.P., Bland, I.D., Desport, J.A., Naish, C., Westcott, C. and Taylor, K.J.: European Appl. Res. Rep. -Nucl. Sci. Technol., 5 [2], 223 (1983).Google Scholar
[3] Leckie, H.P. and Uhlig, H.H.: J. Electrochem. Soc, 113, 1262 (1966).Google Scholar
[4] Tsujikawa, S. and Hisamatsu, Y.: BOSHOKU GIJUTSU, 29, 37 (1980).Google Scholar
[5] Tsujikawa, S.: “Repassivation Potential as Crevice Corrosion Characteristic for Austenitic and Ferritic Stainless Steels”, Proc. 3rd Soviet-Japanese Seminar on Corrosion and Protection, Ed. by Kolotyrkin, Ya. M., NAUKA Publishers, p. 119 (1984).Google Scholar
[6] JIS G 0577 “Method of Pitting Potential Measurement for Stainless steels” (1981).Google Scholar
[7] Ishikawa, H., Amemiya, K., Yusa, Y. and Sasaki, N.: “Comparison of Fundamental Properties of Japanese Bentonite as Buffer Material for Waste Disposal”, presented at 9th Inter. Clay Conf., Strasbourg, France (1989).Google Scholar